mxl-20230331

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q


☑			QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the Quarterly Period Ended March 31, 2023


☐			TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the Transition Period From to

Commission file number: 001-34666

MaxLinear, Inc.

(Exact name of registrant as specified in its charter)

Delaware

14-1896129

(State or other jurisdiction of
incorporation or organization)

(I.R.S. Employer
Identification No.)

5966 La Place Court, Suite 100,

Carlsbad

California

92008

(Address of principal executive offices)

(Zip Code)

(760) 692-0711

(Registrant’s telephone number, including area code)

N/A

(Former name, former address and former fiscal year, if changed since last report)

Securities registered pursuant to Section 12(b) of the Act:


Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common stock	MXL	The Nasdaq Stock Market LLC

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☑ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☑ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer

☑

Accelerated filer

☐

Emerging growth company

☐

Non-accelerated filer

☐

Smaller reporting company

☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☑

As of April 19, 2023, the registrant had 79,981,142 shares of common stock, par value $0.0001, outstanding.

Table of Contents

MAXLINEAR, INC.

QUARTERLY REPORT ON FORM 10-Q

TABLE OF CONTENTS


		Page
Part I	FINANCIAL INFORMATION	3
Item 1.	Financial Statements (unaudited)	4
	Consolidated Balance Sheets as of March 3 1 , 202 3 and December 31, 20 2 2	4
	Consolidated Statements of Income for the Three Months Ended March 31, 2023 and 2022	6
	Consolidated Statements of Comprehensive Income for the Three Months Ended March 3 1 , 202 3 and 202 2	7
	Consolidated Statements of Stockholders’ Equity for the Fiscal Quarters Ended March 31, 2023 and 2022	8
	Consolidated Statements of Cash Flows for the Three Months Ended March 3 1 , 202 3 and 202 2	10
	Notes to Consolidated Financial Statements	11
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	32
Item 3.	Quantitative and Qualitative Disclosures about Market Risk	43
Item 4.	Controls and Procedures	44
Part II	OTHER INFORMATION	45
Item 1.	Legal Proceedings	45
Item 1A.	Risk Factors	46
Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds	81
Item 3.	Defaults Upon Senior Securities	81
Item 4.	Mine Safety Disclosures	81
Item 5.	Other Information	81
Item 6.	Exhibits	83
	Signatures	84

Table of Contents

PART I — FINANCIAL INFORMATION

Table of Contents

ITEM 1. FINANCIAL STATEMENTS

MAXLINEAR, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands, except par value amounts)


	March 31, 2023		December 31, 2022
Assets	(unaudited)
Current assets:
Cash and cash equivalents	$	207,850	$	187,353
Short-term restricted cash	964		982
Short-term investments	18,681		18,529
Accounts receivable, net	188,733		170,971
Inventory	149,585		160,544
Prepaid expenses and other current assets	27,773		24,745
Total current assets	593,586		563,124
Long-term restricted cash	22		22

Property and equipment, net	77,691		79,018
Leased right-of-use assets	26,357		28,515
Intangible assets, net	96,352		109,316
Goodwill	318,910		306,739
Deferred tax assets	57,515		66,491
Other long-term assets	28,045		26,800
Total assets	$	1,198,478	$	1,180,025
Liabilities and stockholders’ equity
Current liabilities:
Accounts payable	$	54,578	$	68,576

Accrued price protection liability	103,797		113,274
Accrued expenses and other current liabilities	112,943		100,155
Accrued compensation	28,844		59,081


Total current liabilities	300,162		341,086
Long-term lease liabilities	21,239		23,353
Long-term debt	121,910		121,757
Other long-term liabilities	21,055		17,444
Total liabilities	464,366		503,640

Commitments and contingencies

Stockholders’ equity:
Preferred stock, $0.0001 par value; 25,000 shares authorized, no shares issued or outstanding	—		—
Common stock, $0.0001 par value; 550,000 shares authorized; 79,981 shares issued and outstanding at March 31, 2023 and 78,745 shares issued and outstanding December 31, 2022	8		8


Additional paid-in capital	771,164		722,778
Accumulated other comprehensive loss	(1,213)		(1,021)
Accumulated deficit	(35,847)		(45,380)
Total stockholders’ equity	734,112		676,385
Total liabilities and stockholders’ equity	$	1,198,478	$	1,180,025

Table of Contents

See accompanying notes.

Table of Contents

MAXLINEAR, INC.

CONSOLIDATED STATEMENTS OF INCOME

(unaudited; in thousands, except per share data)



	Three Months Ended March 31,
	2023		2022
Net revenue	$	248,442	$	263,927
Cost of net revenue	108,135		109,337
Gross profit	140,307		154,590
Operating expenses:
Research and development	67,291		65,886
Selling, general and administrative	38,653		40,577
Impairment losses	2,438		—
Restructuring charges	4,648		—
Total operating expenses	113,030		106,463
Income from operations	27,277		48,127
Interest income	633		31
Interest expense	(2,487)		(2,349)

Other income (expense), net	(324)		(770)
Total other income (expense), net	(2,178)		(3,088)
Income before income taxes	25,099		45,039
Income tax provision	15,566		11,453
Net income	$	9,533	$	33,586
Net income per share:
Basic	$	0.12	$	0.44
Diluted	$	0.12	$	0.42
Shares used to compute net income per share:
Basic	79,471		77,192
Diluted	81,338		80,641

See accompanying notes.

Table of Contents

MAXLINEAR, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(unaudited; in thousands)


	Three Months Ended March 31,
	2023		2022
Net income	$	9,533	$	33,586
Other comprehensive loss, net of tax:



Foreign currency translation adjustments, net of tax benefit of $71 for the three months ended March 31, 2023 and net of tax expense of $2 for the three months ended March 31, 2022, respectively	(192)		(1,075)




Other comprehensive loss	(192)		(1,075)
Total comprehensive income	$	9,341	$	32,511

See accompanying notes.

Table of Contents

MAXLINEAR, INC.

CONSOLIDATED STATEMENT OF STOCKHOLDERS’ EQUITY

FISCAL QUARTER ENDED MARCH 31, 2023

(unaudited; in thousands)


	Common Stock			Additional Paid-In Capital		Accumulated Other Comprehensive Income (Loss)		Accumulated Deficit		Total Stockholders’ Equity
	Shares	Amount
Balance at December 31, 2022	78,745	$	8	$	722,778	$	(1,021)	$	(45,380)	$	676,385
Common stock issued pursuant to equity awards, net	1,236	—		31,926		—		—		31,926


Stock-based compensation	—	—		16,460		—		—		16,460
Other comprehensive loss	—	—		—		(192)		—		(192)
Net income	—	—		—		—		9,533		9,533
Balance at March 31, 2023	79,981	$	8	$	771,164	$	(1,213)	$	(35,847)	$	734,112

Table of Contents

MAXLINEAR, INC.

CONSOLIDATED STATEMENT OF STOCKHOLDERS’ EQUITY

FISCAL QUARTER ENDED MARCH 31, 2022

(unaudited; in thousands)


	Common Stock				Additional Paid-In Capital	Accumulated Other Comprehensive Income (Loss)	Accumulated Deficit	Total Stockholders’ Equity
		Shares	Amount
Balance at December 31, 2021		76,778	$	8				$	657,485	$	2,125	$	(170,420)	$	489,198



Common stock issued pursuant to equity awards, net		1,037						13,835		—		—		13,835
Repurchase of common stock		(440)	—					(26,297)		—		—		(26,297)

Stock-based compensation		—	—					18,599		—		—		18,599

Other comprehensive loss		—	—					—		(1,075)		—		(1,075)
Net income		—	—					—		—		33,586		33,586
Balance at March 31, 2022		77,375	$	8				$	663,622	$	1,050	$	(136,834)	$	527,846

See accompanying notes.

Table of Contents

MAXLINEAR, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(unaudited; in thousands)



	Three Months Ended March 31,
	2023		2022
Operating Activities
Net income	$	9,533	$	33,586
Adjustments to reconcile net income to cash provided by operating activities:
Amortization and depreciation	19,202		23,880
Impairment losses	2,438		—




Amortization of debt issuance costs and accretion of discounts	548		486
Stock-based compensation	16,448		18,554
Deferred income taxes	8,128		6,842
Loss on disposal of property and equipment	40		159

Unrealized holding (gain) loss on investments	(152)		954




(Gain) loss on foreign currency	362		(316)

Excess tax benefits on stock-based awards	(507)		(7,120)
Changes in operating assets and liabilities:
Accounts receivable	(16,931)		(5,969)
Inventory	10,959		(7,338)
Prepaid expenses and other assets	(4,338)		3,503

Accounts payable, accrued expenses and other current liabilities	(886)		32,952
Accrued compensation	7,210		12,237

Accrued price protection liability	(9,877)		27,975
Lease liabilities	(3,095)		(3,301)
Other long-term liabilities	3,077		(2,918)
Net cash provided by operating activities	42,159		134,166

Investing Activities
Purchases of property and equipment	(5,216)		(4,800)

Purchases of intangible assets	(630)		(4,637)
Cash used in acquisitions, net of cash acquired	(9,665)		—
Proceeds loaned under notes receivable	—		(10,000)
Purchases of investments	—		(23,325)

Net cash used in investing activities	(15,511)		(42,762)

Financing Activities



Repayment of debt	—		(20,000)
Net proceeds from issuance of common stock	3		87
Minimum tax withholding paid on behalf of employees for restricted stock units	(6,173)		(24,449)
Repurchase of common stock	—		(26,297)

Net cash used in financing activities	(6,170)		(70,659)
Effect of exchange rate changes on cash and cash equivalents	1		(230)
Increase in cash, cash equivalents and restricted cash	20,479		20,515
Cash, cash equivalents and restricted cash at beginning of period	188,357		131,738
Cash, cash equivalents and restricted cash at end of period	$	208,836	$	152,253

Supplemental disclosures of cash flow information:
Cash paid for interest	$	2,163	$	2,053
Cash paid for income taxes	$	3,336	$	1,698

Supplemental disclosures of non-cash activities:

Issuance of shares for payment of bonuses	$	38,096	$	38,197

See accompanying notes.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

1. Organization and Summary of Significant Accounting Policies

Description of Business

MaxLinear, Inc. was incorporated in Delaware in September 2003. MaxLinear, Inc., together with its wholly owned subsidiaries, collectively referred to as MaxLinear, or the Company, is a provider of communications systems-on-chip (SoC) solutions used in broadband, mobile and wireline infrastructure, data center, and industrial and multi-market applications. MaxLinear is a fabless integrated circuit design company whose products integrate all or substantial portions of a high-speed communication system, including radio frequency (RF), high-performance analog, mixed-signal, digital signal processing, security engines, data compression and networking layers, and power management. MaxLinear’s customers include electronics distributors, module makers, original equipment manufacturers, or OEMs, and original design manufacturers, or ODMs, who incorporate the Company’s products in a wide range of electronic devices, including cable Data Over Cable Service Interface Specifications (DOCSIS), fiber and DSL broadband modems and gateways; Wi-Fi and wireline routers for home networking; radio transceivers and modems for 4G/5G base-station and backhaul infrastructure; fiber-optic modules for data center, metro, and long-haul transport networks; as well as power management and interface products used in these and many other markets.

Basis of Presentation and Principles of Consolidation

The accompanying unaudited consolidated financial statements include the accounts of MaxLinear, Inc. and its wholly owned subsidiaries and have been prepared in accordance with accounting principles generally accepted in the United States of America, or GAAP, for interim financial information and with the instructions to Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all of the information and disclosures required by GAAP for complete financial statements. All intercompany transactions and investments have been eliminated in consolidation.

In the opinion of management, the Company’s unaudited consolidated interim financial statements contain adjustments, including normal recurring accruals necessary to present fairly the Company’s consolidated financial position, results of operations, comprehensive income, stockholders’ equity, and cash flows.

The consolidated balance sheet as of December 31, 2022 was derived from the Company’s audited consolidated financial statements at that date. The accompanying unaudited consolidated interim financial statements should be read in conjunction with the audited consolidated financial statements and related notes thereto for the year ended December 31, 2022 included in the Company’s Annual Report on Form 10-K filed by the Company with the Securities and Exchange Commission, or the SEC, on February 1, 2023, or the Annual Report. Interim results for the three months ended March 31, 2023 are not necessarily indicative of the results that may be expected for the fiscal year ending December 31, 2023.

The functional currency of certain foreign subsidiaries is the local currency. Accordingly, assets and liabilities of these foreign subsidiaries are translated at the current exchange rate at the balance sheet date and historical rates for equity. Revenue and expense components are translated at weighted average exchange rates in effect during the period. Gains and losses resulting from foreign currency translation are included as a component of stockholders’ equity. Foreign currency transaction gains and losses are included in the results of operations, and to date, have not been material.

Use of Estimates and Significant Risks and Uncertainties

The preparation of consolidated financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the amounts reported in the unaudited consolidated financial statements and accompanying notes of the consolidated financial statements. Actual results could differ from those estimates.

The Company is not aware of any specific event or circumstance that would require an update to its estimates or adjustments to the carrying value of its assets and liabilities as of April 26, 2023, the issuance date of this Quarterly Report on Form 10-Q. Actual results could differ from those estimates.

Summary of Significant Accounting Policies

Refer to the Company’s Annual Report for a summary of significant accounting policies. There have been no significant changes to the Company’s significant accounting policies during the three months ended March 31, 2023.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

Recently Issued Accounting Pronouncements

In October 2021, the FASB issued ASU No. 2021-08, Business Combinations (Topic 805): Accounting for Contract Assets and Contract Liabilities from Contracts with Customers, to provide specific guidance to eliminate diversity in practice on how to recognize and measure acquired contract assets and contract liabilities from revenue contracts from customers in a business combination consistent with revenue contracts with customers not acquired in an acquisition. The amendments in this update provide that the acquirer should consider the terms of the acquired contracts, such as timing of payment, identify each performance obligation in the contracts, and allocate the total transaction price to each identified performance obligation on a relative standalone selling price basis as of contract inception (that is, the date the acquiree entered into the contracts) or contract modification to determine what should be recorded at the acquisition date. These amendments are effective for the Company beginning with fiscal year 2023. The impact of the adoption of the amendments in this update will depend on the magnitude of any customer contracts assumed in a business combination in 2023 and beyond.

2. Net Income Per Share

Basic earnings per share, or EPS, is calculated by dividing net income by the weighted-average number of common shares outstanding for the period, without consideration for common stock equivalents. Diluted EPS is computed by dividing net income by the weighted-average number of common shares outstanding for the period and the weighted-average number of dilutive common stock equivalents outstanding for the period determined using the treasury-stock method. For purposes of this calculation, common stock options, restricted stock units and restricted stock awards are considered to be common stock equivalents and are only included in the calculation of diluted EPS when their effect is dilutive. In periods in which the Company has a net loss, dilutive common stock equivalents are excluded from the calculation of diluted EPS.

The table below presents the computation of basic and diluted EPS:


	Three Months Ended March 31,
	2023		2022
	(in thousands, except per share amounts)
Numerator:
Net income	$	9,533	$	33,586
Denominator:
Weighted average common shares outstanding—basic	79,471		77,192
Dilutive common stock equivalents	1,867		3,449
Weighted average common shares outstanding—diluted	81,338		80,641
Net income per share:
Basic	$	0.12	$	0.44
Diluted	$	0.12	$	0.42

For the three months ended March 31, 2023 and 2022, the Company excluded common stock equivalents for outstanding stock-based awards, which represented potentially dilutive securities of 2.2 million and 0.9 million, respectively, from the calculation of diluted net income per share due to their anti-dilutive nature.

3. Business Combinations

Silicon Motion Merger

On May 5, 2022, MaxLinear entered into an Agreement and Plan of Merger, or the Merger Agreement, with Silicon Motion Technology Corporation, or Silicon Motion, an exempted company with limited liability incorporated under the laws of the Cayman Islands, pursuant to which, among other things and subject to the terms and conditions thereof, MaxLinear agreed to acquire Silicon Motion pursuant to a statutory merger, under the laws of the Cayman Islands, of Shark Merger Sub, a wholly-owned subsidiary of MaxLinear, with and into Silicon Motion, with Silicon Motion surviving the merger as a wholly-owned subsidiary of MaxLinear. Silicon Motion is a provider of NAND flash controllers for solid state drives, or SSDs, and other solid state storage devices.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

Under the terms of the Merger Agreement, the transaction consideration will consist of $93.54 in cash and 0.388 shares of MaxLinear common stock for each Silicon Motion American Depositary Share, or ADS, (other than ADSs representing certain customary excluded shares) and $23.385 in cash and 0.097 shares of MaxLinear common stock for each Silicon Motion ordinary share not represented by an ADS (other than certain customary excluded shares), in each case, with cash in lieu of any fractional shares of MaxLinear common stock as set forth in the Merger Agreement. Upon closing of the transaction, the current MaxLinear stockholders are expected to own approximately 86% of the combined company and former Silicon Motion securityholders are expected to own approximately 14% of the combined company. Based on the closing price of MaxLinear shares on May 4, 2022, the implied value of the total transaction consideration for Silicon Motion is approximately $4.3 billion. MaxLinear may fund up to $3.5 billion of cash consideration with cash on hand and fully committed debt financing from Wells Fargo Bank, N.A., or Wells Fargo Bank, and other lenders as described below. MaxLinear will also assume Silicon Motion’s vested and unvested employee stock-based compensation awards.

The merger is not subject to any financing conditions but is pending satisfaction of customary closing conditions, including antitrust approval in the People’s Republic of China, or China. On June 27, 2022, the Hart-Scott-Rodino Antitrust Improvements Act of 1976, or HSR, waiting period expired with respect to the pending merger; however, if the merger is not consummated by June 27, 2023, the parties will need to re-file under the HSR Act. On July 13, 2022, the registration statement on Form S-4 was declared effective by the SEC. On August 31, 2022, the Silicon Motion securityholders approved the merger at the extraordinary general meeting.

On June 17, 2022, MaxLinear entered into an amended and restated commitment letter with Wells Fargo Bank and other lenders pursuant to which, subject to the terms and conditions set forth therein, the lenders have committed to provide (i) a senior secured term B loan facility in an aggregate principal amount of up to $2.7375 billion, or the Term B Loan Facility, (ii) a senior secured term A loan facility in an aggregate principal amount of up to $512.5 million, or the Term A Loan Facility and (iii) a senior secured revolving credit facility in an aggregate principal amount of up to $250.0 million, which we collectively refer to as the Senior Secured Credit Facilities. The funding of the Senior Secured Credit Facilities is contingent on the satisfaction of customary conditions, including (i) the execution and delivery of definitive documentation with respect to credit facilities in accordance with the terms in the amended and restated commitment letter, and (ii) the consummation of the acquisition by MaxLinear of Silicon Motion in accordance with the Merger Agreement. A portion of the proceeds from the Senior Secured Credit Facilities will be used to repay existing debt (Note 8) in full.

On October 24, 2022, MaxLinear entered into a second amended and restated commitment letter with Wells Fargo Bank and other lenders, which allows for additional commitments in respect of the Term A Loan Facility to be effected by way of the joinder of additional commitment parties to the second amended and restated commitment letter, and allows for an increase in the Term Loan A Loan Facility on a dollar-for-dollar basis by a corresponding decrease in the amount of the Term Loan B facility.

Acquisition of Company Y

On January 17, 2023, the Company completed its acquisition of a business, or Company Y, pursuant to a Purchase and Sale Agreement, or the Purchase Agreement. The transaction consideration included $9.7 million in cash. In addition, Company Y stockholders may receive up to an additional $2.6 million in potential contingent consideration, subject to the acquired business satisfying certain personnel objectives by June 17, 2024.

Company Y is headquartered in Bangalore, India and operates as a provider of engineering design services.

Acquisition Consideration

The following table summarizes the fair value of purchase price consideration to acquire Company Y (in thousands):


Description	Amount
Fair value of purchase consideration:
Cash	$	9,665

Contingent consideration(1)	2,200
Total purchase price	$	11,865

_________________

(1) The fair value of contingent consideration is based on applying the Monte Carlo simulation method to forecast achievement under various contingent consideration events which may result in up to $2.6 million in payments subject to the acquired


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

business’s satisfying certain financial and personnel objectives by June 17, 2024 under the Purchase Agreement. Key inputs in the valuation include forecasted revenue, revenue volatility and discount rate. Underlying forecast mathematics were based on Geometric Brownian Motion in a risk-neutral framework and discounted back to the applicable period in which the accumulative thresholds were achieved at discount rates commensurate with the risk and expected payout term of the contingent consideration.

Purchase Price Allocation

An allocation of purchase price as of the January 17, 2023 acquisition closing date based upon an estimate of the fair value of the assets acquired and the liabilities assumed by the Company in the acquisition primarily includes $2.5 million in net operating liabilities, with $12.2 million in goodwill.

Assumptions in the Allocations of Purchase Price

Management prepared the purchase price allocations for Company Y and in doing so considered or relied in part upon reports of a third party valuation expert to calculate the fair value of certain acquired assets, which primarily included an acquired workforce and contingent consideration. Certain stockholders that are employees of Company Y were not required to remain employed in order to receive the contingent consideration; accordingly, the fair value of the contingent consideration was accounted for as a portion of the purchase consideration.

Estimates of fair value require management to make significant estimates and assumptions. The goodwill recognized is attributable primarily to the acquired workforce. Certain liabilities included in the purchase price allocations are based on management’s best estimates of the amounts to be paid or settled and based on information available at the time the purchase price allocations were prepared.

In connection with the acquisition of Company Y, the Company assumed certain operating liabilities. The liabilities assumed in this acquisition are included in the respective purchase price allocations above.

Goodwill recorded in connection with Company Y was $12.2 million as of March 31, 2023. The Company does not expect to deduct any of the acquired goodwill for tax purposes.

4. Restructuring Activity

During the three months ended March 31, 2023, the Company entered into a plan of restructuring to reduce its workforce as a result of internal resource alignment and cost saving measures.

The following table presents the activity related to the restructuring plan, which is included in restructuring charges in the consolidated statements of income:


	Three Months Ended March 31,
	2023		2022
	(in thousands)
Employee separation expenses	$	4,589	$	—
Lease related charges	8		—
Other	51		—
	$	4,648	$	—

We expect to incur additional costs throughout the remainder of 2023 related to the plan of restructuring, due to statutory requirements in the jurisdictions in which the terminated employees were employed.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

The following table presents a roll-forward of the Company’s restructuring liability for the three months ended March 31, 2023. The restructuring liability is included in accrued expenses and other current liabilities and other long-term liabilities in the consolidated balance sheets.


	Employee Separation Expenses		Lease Related Charges		Other		Total
	(in thousands)
Liability as of December 31, 2022	$	971	$	103	$	8	$	1,082
Restructuring charges	4,589		8		51		4,648
Cash payments	(2,463)		(61)		(51)		(2,575)

Non-cash charges and adjustments	—		21		—		21

Liability as of March 31, 2023	3,097		71		8		3,176
Less: current portion as of March 31, 2023	(3,097)		(71)		(8)		(3,176)
Long-term portion as of March 31, 2023	$	—	$	—	$	—	$	—

5. Goodwill and Intangible Assets

Goodwill

Goodwill arises from the acquisition method of accounting for business combinations and represents the excess of the purchase price over the fair value of the net assets and other identifiable intangible assets acquired. The fair values of net tangible assets and intangible assets acquired are based upon preliminary valuations and the Company’s estimates and assumptions are subject to change within the measurement period (potentially up to one year from the acquisition date).

The following table presents the changes in the carrying amount of goodwill for the periods indicated:


	Three Months Ended March 31,
	2023		2022
	(in thousands)
Beginning balance	$	306,739	$	306,668
Acquisitions (Note 3)	12,171		—
Adjustments	—		45

Ending balance	$	318,910	$	306,713

During the three months ended March 31, 2023, there was an increase in the carrying value of goodwill of $12.2 million related to the acquisition of Company Y.

The Company performs an annual goodwill impairment assessment on October 31st each year, using a quantitative assessment comparing the fair value of each reporting unit, which the Company has determined to be the entity itself, with its carrying amount, including goodwill. If the carrying amount of a reporting unit exceeds its fair value, an impairment loss is recorded.

In addition to its annual review, the Company performs a test of impairment when indicators of impairment are present. During the three months ended March 31, 2023 and 2022, there were no indications of impairment of the Company’s goodwill balances.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

Acquired Intangibles

Finite-lived Intangible Assets

The following table sets forth the Company’s finite-lived intangible assets resulting from business acquisitions and other purchases, which are amortized over their estimated useful lives:


		March 31, 2023						December 31, 2022
	Weighted Average Useful Life (in Years)	Gross Carrying Amount		Accumulated Amortization		Net Carrying Amount		Gross Carrying Value		Accumulated Amortization		Net Carrying Amount
		(in thousands)
Licensed technology	6.9	$	19,187	$	(717)	$	18,470	$	21,764	$	(580)	$	21,184
Developed technology	6.9	311,261		(237,854)		73,407		311,261		(228,532)		82,729
Trademarks and trade names	6.2	14,800		(14,001)		799		14,800		(13,461)		1,339
Customer relationships	5.0	128,800		(125,192)		3,608		128,800		(124,807)		3,993

Backlog	5.3	500		(432)		68		500		(429)		71
	6.1	$	474,548	$	(378,196)	$	96,352	$	477,125	$	(367,809)	$	109,316

The following table sets forth amortization expense associated with finite-lived intangible assets, which is included in the consolidated statements of income as follows:


	Three Months Ended March 31,
	2023		2022
	(in thousands)
Cost of net revenue	$	9,458	$	10,847
Research and development	1		1
Selling, general and administrative	928		6,176
	$	10,387	$	17,024

Amortization of finite-lived intangible assets in cost of net revenue in the consolidated statements of income results primarily from acquired developed technology.

The following table sets forth the activity related to finite-lived intangible assets:


	Three Months Ended March 31,
	2023		2022
	(in thousands)
Beginning balance	$	109,316	$	149,940

Additions	630		4,637
Other disposals	(769)		—

Amortization	(10,387)		(17,024)
Impairment losses	(2,438)		—
Ending balance	$	96,352	$	137,553

The Company regularly reviews the carrying amount of its long-lived assets subject to depreciation and amortization, as well as the related useful lives, to determine whether indicators of impairment may exist that warrant adjustments to carrying values or estimated useful lives. An impairment loss is recognized when the sum of the expected future undiscounted net cash flows is less than the carrying amount of the asset. Should impairment exist, the impairment loss is measured based on the excess of the carrying amount of the asset over the asset’s fair value. During the three months ended March 31, 2023 and 2022, impairment losses related to finite-lived intangible assets of $2.4 million and $0, respectively, were recognized. The impairment loss was attributable to certain purchased licensed technology.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

The following table presents future amortization of the Company’s finite-lived intangible assets at March 31, 2023:


	Amount
	(in thousands)
2023 (9 months)	$	28,272
2024	23,738
2025	14,044
2026	12,935
2027	9,087
Thereafter	8,276
Total	$	96,352

6. Financial Instruments

The composition of financial instruments is as follows:


	March 31, 2023
			Net Unrealized
	Cost		Gains		Losses		Fair Value
			(in thousands)
Assets
Marketable equity investments	$	20,005	$	—	$	(1,324)	$	18,681






	December 31, 2022
			Net Unrealized
	Cost		Gains		Losses		Fair Value
Assets			(in thousands)
Marketable equity investments	$	20,005	$	—	$	(1,476)	$	18,529


	March 31, 2023		December 31, 2022
	Fair Value		Fair Value
	(in thousands)
Liabilities
Contingent consideration (Note 3)	$	5,253	2,941

At March 31, 2023, the Company held marketable equity investments with an aggregate fair value of $18.7 million that were in an unrealized loss position. The net unrealized loss of $1.3 million as of March 31, 2023 represents stock price fluctuations in the underlying securities held, and was recorded to other income (expense), net in the consolidated statement of income.

The Company evaluates securities for other-than-temporary impairment on a quarterly basis. Impairment is evaluated considering numerous factors, and their relative significance varies depending on the situation. Factors considered include the length of time and extent to which fair value has been less than the cost basis, the financial condition and near-term prospects of the issuer; including changes in the financial condition of any underlying collateral of the security; any downgrades of the security by analysts or rating agencies; nonpayment of any scheduled interest, or the reduction or elimination of dividends; as well as our intent and ability to hold the security in order to allow for an anticipated recovery in fair value.

The fair values of the Company’s financial instrument is the amount that would be received in an asset sale or paid to transfer a liability in an orderly transaction between unaffiliated market participants and is recorded using a hierarchical disclosure framework based upon the level of subjectivity of the inputs used in measuring assets and liabilities. The levels are described below:


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

Level 1: Quoted prices (unadjusted) in active markets that are accessible at the measurement date for assets or liabilities.

Level 2: Observable prices that are based on inputs not quoted on active markets, but corroborated by market data.

Level 3: Unobservable inputs are used when little or no market data is available.

The Company classifies its financial instruments that are categorized within Level 1 or Level 2 of the fair value hierarchy on the basis of valuations using quoted market prices or alternate pricing sources and models utilizing market observable inputs, respectively. The marketable equity investments held by the Company have been valued on the basis of quoted market prices and is therefore classified as Level 1.

The contingent consideration liability as of March 31, 2023 is associated with the Company’s acquisitions of Company X in December 2021 and Company Y in January 2023 (Note 3) and the contingent consideration liability as of December 31, 2022 is associated with the Company’s acquisition of Company X. The contingent consideration liability is classified as a Level 3 financial instrument. The contingent consideration as it relates to Company X was subject to the acquired business’s satisfaction of certain financial and personnel objectives by March 31, 2023, while the contingent consideration as it relates to Company Y is subject to the acquired business’s satisfaction of certain personnel objectives by June 17, 2024. The financial and personnel objectives of Company X were achieved by March 31, 2023 and contingent consideration for Company X of $2.7 million is expected to be paid by the end of April 2023 with the remaining $0.3 million to be paid in December 2023. The fair value of contingent consideration is based on (1) applying the Monte Carlo simulation method, with underlying forecast mathematics based on Geometric Brownian motion in a risk-neutral framework, to forecast achievement of the acquired business’ financial objectives, if applicable, under various possible contingent consideration events and (2) a probability based methodology using management’s inputs and assumptions to forecast achievement of the acquired business’ personnel objectives which combined may result in total payments up to $3.0 million to Company X and $2.6 million to Company Y. Key inputs in the valuation include forecasted revenue, revenue volatility, discount rate and discount term as it relates to the financial objectives and probability of achievement, discount term and discount rate as it relates to the personnel objectives.



			Fair Value Measurements at March 31, 2023
	Balance at March 31, 2023		Quoted Prices in Active Markets for Identical Assets (Level 1)		Significant Other Observable Inputs (Level 2)		Significant Unobservable Inputs (Level 3)
	(in thousands)
Assets
Marketable equity securities	$	18,681	$	18,681	$	—	$	—




Liabilities
Contingent consideration	$	5,253	$	—	$	—	$	5,253



			Fair Value Measurements at December 31, 2022
	Balance at December 31, 2022		Quoted Prices in Active Markets for Identical Assets (Level 1)		Significant Other Observable Inputs (Level 2)		Significant Unobservable Inputs (Level 3)
	(in thousands)
Assets
Marketable equity securities	$	18,529	$	18,529	$	—	$	—




Liabilities
Contingent consideration	$	2,941	$	—	$	—	$	2,941


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

The following summarizes the activity in Level 3 financial instruments:


	Three Months Ended March 31,
	2023		2022
Contingent Consideration
Beginning balance	$	2,941	$	2,700
Acquisitions(1)	2,200		—

Accretion of discount(1)	112		68
Ending balance	$	5,253	$	2,768

_____________________

(1) Changes to the balance associated with the estimated fair value of contingent consideration for the three months ended March 31, 2023 were due to the addition of contingent consideration associated with the acquisition of Company Y and accretion of discounts on contingent consideration.

For the three months ended March 31, 2023, there were no transfers between Level 1, Level 2, or Level 3 financial instruments.

Financial Instruments Not Recorded at Fair Value on a Recurring Basis

Some of the Company’s financial instruments are recorded at amounts that approximate fair value due to their liquid or short-term nature or by election on investments in privately-held entities as described below. Such financial assets and financial liabilities include: cash and cash equivalents, restricted cash, net receivables, investments in privately-held entities, certain other assets, accounts payable, accrued price protection liability, accrued expenses, accrued compensation costs, and other current liabilities.

The Company’s long-term debt is not recorded at fair value on a recurring basis, but is measured at fair value for disclosure purposes (Note 8).

Included in other long-term assets are investments in privately held entities of $11.8 million and $11.8 million as of March 31, 2023 and December 31, 2022, respectively. The Company does not have the ability to exercise significant influence or control over such entity and has accounted for the investments as financial instruments. Given that fair values for such investments are not readily determinable, the Company is electing to measure these investments at cost, less any impairment, and adjust the carrying value to fair value if any observable price changes for similar investments in the same entity are identified.

7. Balance Sheet Details

Cash, cash equivalents and restricted cash consist of the following:


	March 31, 2023		December 31, 2022
	(in thousands)
Cash and cash equivalents	$	207,850	$	187,353
Short-term restricted cash	964		982
Long-term restricted cash	22		22
Total cash, cash equivalents and restricted cash	$	208,836	$	188,357

As of March 31, 2023 and December 31, 2022, cash and cash equivalents included money market funds of approximately $20.5 million and $0.4 million, respectively. As of March 31, 2023 and December 31, 2022, the Company had restricted cash of approximately $1.0 million and $1.0 million, respectively. The cash is restricted in connection with guarantees for certain import duties and office leases.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

Inventory consists of the following:


	March 31, 2023		December 31, 2022
	(in thousands)

Work-in-process	$	88,654	$	97,840
Finished goods	60,931		62,704


	$	149,585	$	160,544

Property and equipment, net consists of the following:


	Useful Life (in Years)	March 31, 2023		December 31, 2022
		(in thousands)
Furniture and fixtures	5	$	3,935	$	3,924
Machinery and equipment	3-5	77,427		74,258
Masks and production equipment	2-5	53,848		50,970
Software	3	13,517		10,111
Leasehold improvements	1-5	35,335		34,236
Construction in progress	N/A	532		7,602
		184,594		181,101
Less: accumulated depreciation and amortization		(106,903)		(102,083)
		$	77,691	$	79,018

Depreciation expense for the three months ended March 31, 2023 and 2022 was $6.4 million and $4.8 million, respectively.

In March 2022, the Company entered into a note receivable with a supplier for $10.0 million, of which $2.0 million and $8.0 million are included in prepaid expenses and other current assets and other long-term assets, respectively, on the consolidated balance sheet as of March 31, 2023, and $10.0 million is included in other long-term assets as of December 31, 2022. Repayments of $2.0 million per year are due annually by March 31, from 2024 through 2027, provided that certain production utilization targets for the prior year are met.

Accrued price protection liability consists of the following activity:


	Three Months Ended March 31,
	2023		2022
	(in thousands)
Beginning balance	$	113,274	$	40,509

Charged as a reduction of revenue	28,536		41,473

Payments	(38,013)		(13,633)
Ending balance	$	103,797	$	68,349


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

Accrued expenses and other current liabilities consist of the following:


	March 31, 2023		December 31, 2022
	(in thousands)


Accrued technology license payments	$	5,619	$	7,402
Accrued professional fees	3,451		4,072
Accrued engineering and production costs	2,089		2,560
Accrued restructuring	3,176		1,082

Accrued royalty	1,345		1,662
Short-term lease liabilities	10,063		10,489

Accrued customer credits	508		304

Income tax liability	12,840		8,895
Customer contract liabilities	1,072		1,072
Accrued obligations to customers for price adjustments	62,324		52,392
Accrued obligations to customers for stock rotation rights	739		605
Contingent consideration - current portion	3,000		2,941
Other	6,717		6,679
	$	112,943	$	100,155

The following table summarizes the change in balances of accumulated other comprehensive income (loss) by component:


	Cumulative Translation Adjustments		Pension and Other Defined Benefit Plan Obligation		Total
	(in thousands)
Balance at December 31, 2022	$	(5,180)	$	4,159	$	(1,021)
Other comprehensive loss before reclassifications, net of tax	(192)		—		(192)


Balance at March 31, 2023	$	(5,372)	$	4,159	$	(1,213)

8. Debt

Debt

The carrying amount of the Company’s long-term debt consists of the following:


	March 31, 2023		December 31, 2022
	(in thousands)
Principal balance:
Initial term loan under the June 23, 2021 credit agreement	$	125,000	$	125,000


Total principal balance	125,000		125,000
Less:
Unamortized debt discount	(664)		(695)
Unamortized debt issuance costs	(2,426)		(2,548)
Net carrying amount of long-term debt	121,910		121,757
Less: current portion of long-term debt	—		—
Long-term debt, non-current portion	$	121,910	$	121,757

As of March 31, 2023 and December 31, 2022, the weighted average effective interest rate on debt was approximately 6.9% and 3.8%, respectively.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

During the three months ended March 31, 2023 and 2022, the Company recognized total amortization of debt discount and debt issuance costs of $0.2 million and $0.1 million, respectively, to interest expense.

The approximate aggregate fair value of the term loans outstanding as of March 31, 2023 and December 31, 2022 was $139.1 million and $137.4 million, respectively, which was estimated on the basis of inputs that are observable in the market and which is considered a Level 2 measurement method in the fair value hierarchy.

As of March 31, 2023, the outstanding principal balance of $125.0 million is due in full on June 23, 2028, upon maturity of the loan.

Initial Term Loan and Revolving Facility under the June 23, 2021 Credit Agreement

On June 23, 2021, the Company entered into a Credit Agreement, or the June 23, 2021 Credit Agreement, by and among the Company, the lenders from time to time party thereto, and Wells Fargo Bank, National Association, as administrative agent and collateral agent, that provides for a senior secured term B loan facility, or the “Initial Term Loan under the June 23, 2021 Credit Agreement,” in an aggregate principal amount of $350.0 million and a senior secured revolving credit facility, or the “Revolving Facility,” in an aggregate principal amount of up to $100.0 million. The proceeds of the Initial Term Loan under the June 23, 2021 Credit Agreement were used (i) to repay in full all outstanding indebtedness under that certain Credit Agreement dated May 12, 2017, by and among the Company, MUFG Bank Ltd., as administrative agent and MUFG Union Bank, N.A., as collateral agent and the lenders from time to time party thereto (as amended by Amendment No. 1, dated July 31, 2020) and (ii) to pay fees and expenses incurred in connection therewith. The remaining proceeds of the Initial Term Loan under the June 23, 2021 Credit Agreement are available for general corporate purposes and the proceeds of the Revolving Facility may be used to finance the working capital needs and other general corporate purposes of the Company and its subsidiaries. As of March 31, 2023, the Revolving Facility was undrawn. Under the amended and restated commitment letter with Wells Fargo Bank and other lenders entered into in connection with the pending merger with Silicon Motion (Note 3), the Company expects to repay the remaining outstanding term loans under this agreement upon closing of the merger.

The June 23, 2021 Credit Agreement permits the Company to request incremental loans in an aggregate principal amount not to exceed the sum of an amount equal to the greater of (x) $175.0 million and (y) 100% of consolidated EBITDA, plus the amount of certain voluntary prepayments, plus an unlimited amount that is subject to pro forma compliance with certain first lien net leverage ratio, secured net leverage ratio and total net leverage ratio tests. Incremental loans are subject to certain additional conditions, including obtaining additional commitments from the lenders then party to the June 23, 2021 Credit Agreement or new lenders.

Under the June 23, 2021 Credit Agreement, the Initial Term Loan bears interest, at the Company’s option, at a per annum rate equal to either (i) a base rate equal to the highest of (x) the federal funds rate, plus 0.50%, (y) the prime rate then in effect and (z) an adjusted LIBOR rate determined on the basis of a one-month interest period plus 1.00%, in each case, plus an applicable margin of 1.25% or (ii) an adjusted LIBOR rate, subject to a floor of 0.50%, plus an applicable margin of 2.25%. Loans under the Revolving Facility initially bear interest, at a per annum rate equal to either (i) a base rate (as calculated above) plus an applicable margin of 0.00%, or (ii) an adjusted LIBOR rate (as calculated above) plus an applicable margin of 1.00%. Following delivery of financial statements for the Company’s fiscal quarter ending June 30, 2021, the applicable margin for loans under the Revolving Facility will range from 0.00% to 0.75% in the case of base rate loans and 1.00% to 1.75% in the case of LIBOR rate loans, in each case, depending on the Company’s secured net leverage ratio as of the most recently ended fiscal quarter. The Company is required to pay commitment fees ranging from 0.175% to 0.25% per annum on the daily undrawn commitments under the Revolving Facility, depending on the Company’s secured net leverage ratio as of the most recently ended fiscal quarter. Commencing on September 30, 2021, the Initial Term Loan under the June 23, 2021 Credit Agreement will amortize in equal quarterly installments equal to 0.25% of the original principal amount of the Initial Term Loan under the June 23, 2021 Credit Agreement, with the balance payable on the maturity date. The June 23, 2021 Credit Agreement contains customary provisions specifying alternative interest rate calculations to be employed at such time as LIBOR ceases to be available as a benchmark for establishing the interest rate on floating interest rate borrowings.

The Company is required to make mandatory prepayments of the outstanding principal amount of term loans under the June 23, 2021 Credit Agreement with the net cash proceeds from the disposition of certain assets and the receipt of insurance proceeds upon certain casualty and condemnation events, in each case, to the extent not reinvested within a specified time period, from excess cash flow beyond stated threshold amounts, and from the incurrence of certain indebtedness. The Company has the right to prepay its term loans under the June 23, 2021 Credit Agreement, in whole or in part, at any time without premium or penalty, subject to certain limitations and a 1.0% soft call premium applicable during the first six months following the closing date of the June 23, 2021 Credit Agreement. The Initial Term Loan under the June 23, 2021 Credit Agreement will


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

mature on June 23, 2028, at which time all outstanding principal and accrued and unpaid interest on the Initial Term Loan under the June 23, 2021 Credit Agreement must be repaid. The Revolving Facility will mature on June 23, 2026, at which time all outstanding principal and accrued and unpaid interest under the Revolving Facility must be repaid. The Company is also obligated to pay fees customary for a credit facility of this size and type.

The Company’s obligations under the June 23, 2021 Credit Agreement are required to be guaranteed by certain of its domestic subsidiaries meeting materiality thresholds set forth in the June 23, 2021 Credit Agreement. Such obligations, including the guaranties, are secured by substantially all of the assets of the Company and the subsidiary guarantors pursuant to a Security Agreement, dated as of June 23, 2021, by and among the Company, the subsidiary guarantors from time to time party thereto, and Wells Fargo Bank, National Association, as collateral agent.

The June 23, 2021 Credit Agreement contains customary affirmative and negative covenants, including covenants limiting the ability of the Company and its restricted subsidiaries to, among other things, incur debt, grant liens, undergo certain fundamental changes, make investments, make certain restricted payments, and sell assets, in each case, subject to limitations and exceptions set forth in the June 23, 2021 Credit Agreement. The Revolving Facility also prohibits the Company from having a secured net leverage ratio in excess of 3.50:1.00 (subject to a temporary increase to 3.75:1.00 following the consummation of certain material permitted acquisitions) as of the last day of any fiscal quarter of the Company (commencing with the fiscal quarter ending September 30, 2021) if the aggregate borrowings under the Revolving Facility exceed 1% of the aggregate commitments thereunder (subject to certain exceptions set forth in the June 23, 2021 Credit Agreement) as of such date. As of March 31, 2023, the Company was in compliance with such covenants. The June 23, 2021 Credit Agreement also contains customary events of default that include, among other things, certain payment defaults, cross defaults to other indebtedness, covenant defaults, change in control defaults, judgment defaults, and bankruptcy and insolvency defaults. If an event of default exists, the lenders may require immediate payment of all obligations under the June 23, 2021 Credit Agreement and may exercise certain other rights and remedies provided for under the June 23, 2021 Credit Agreement, the other loan documents and applicable law.

The debt is carried at its principal amount, net of unamortized debt discount and issuance costs, and is not adjusted to fair value each period. The issuance date fair value of the liability component of the debt in the amount of $350.2 million was determined using a discounted cash flow analysis, in which the projected interest and principal payments were discounted back to the issuance date of the term loan at a market interest rate for nonconvertible debt of 3.4%, which represents a Level 2 fair value measurement. The debt discount of $0.9 million and debt issuance costs of $2.9 million associated with the Initial Term Loan under the June 23, 2021 Credit Agreement are being amortized to interest expense using the effective interest method over its seven-year term. Debt issuance costs of $0.4 million associated with the Revolving Facility are being amortized to interest expense over its five-year term.

9. Stock-Based Compensation

Employee Stock-Based Compensation Plans

At March 31, 2023, the Company had stock-based compensation awards outstanding under the following plans: the 2010 Equity Incentive Plan, as amended, or 2010 Plan, and the 2010 Employee Stock Purchase Plan, or ESPP. Refer to the Company’s Annual Report for a summary of its stock-based compensation and equity plans as of December 31, 2022. There have been no material changes to the terms of the Company’s equity incentive plans during the three months ended March 31, 2023.

As of March 31, 2023, the number of shares of common stock available for future issuance under the 2010 Plan was 16,652,604 shares. As of March 31, 2023, the number of shares of common stock available for future issuance under the ESPP was 5,890,355 shares.

Employee Incentive Bonus

The Company mostly settles bonus awards for its employees, including executives, in shares of common stock under the 2010 Equity Incentive Plan. When bonus awards are settled in common stock issued under the 2010 Equity Incentive Plan, the number of shares issuable to plan participants is determined based on the closing price of the Company’s common stock as determined in trading on the applicable stock exchange, on a date approved by the Board of Directors. In connection with the Company’s bonus programs, in February 2023, the Company issued 0.9 million freely-tradable (subject to certain restrictions for affiliates) shares of the Company’s common stock in settlement of bonus awards to employees, including executives, for the 2022 performance period. At March 31, 2023, the Company has an accrual of $5.9 million for bonus awards for employees for


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

year-to-date achievement in the 2023 performance period. The Company’s compensation committee retains discretion to effect payment in cash, stock, or a combination of cash and stock.

Stock-Based Compensation

The Company recognizes stock-based compensation in the consolidated statements of income, based on the department to which the related employee reports, as follows:


	Three Months Ended March 31,
	2023		2022
	(in thousands)
Cost of net revenue	$	210	$	163
Research and development	11,455		9,676
Selling, general and administrative	4,783		8,715

	$	16,448	$	18,554

The total unrecognized compensation cost related to unvested restricted stock units as of March 31, 2023 was $175.9 million, and the weighted average period over which these equity awards are expected to vest is 2.70 years.

The total unrecognized compensation cost related to unvested performance-based restricted stock units as of March 31, 2023 was $28.2 million, and the weighted average period over which these equity awards are expected to vest is 1.87 years.

There was no unrecognized compensation cost related to unvested stock options as of March 31, 2023.

Restricted Stock Units

A summary of the Company’s restricted stock unit activity is as follows:


	Number of Shares (in thousands)	Weighted-Average Grant-Date Fair Value per Share
Outstanding at December 31, 2022	6,080	$	35.01
Granted	2,840	39.53

Vested	(1,154)	43.78
Canceled	(235)	38.44
Outstanding at March 31, 2023	7,531	$	35.26

Performance-Based Restricted Stock Units

Performance-based restricted stock units are eligible to vest at the end of each year-long performance period, as defined in the underlying agreement, in a three-year performance period based on the Company’s annual growth rate in net sales and non-GAAP diluted earnings per share (subject to certain adjustments) over baseline results relative to the growth rates for a peer group of companies for the same metrics and periods.

For the performance-based restricted stock units granted to date, 60% of each performance-based award is subject to the net sales metric for the performance period and 40% is subject to the non-GAAP diluted earnings per share metric for the performance period. The maximum percentage for a particular metric is 250% of the target number of units subject to the award related to that metric, however, vesting of the performance stock units is capped at 30% and 100%, respectively, of the target number of units subject to the award in years one and two, respectively, of the three-year performance period.

As of March 31, 2023, the Company believes that it is probable that it will achieve certain performance metrics specified in the respective award agreements based on its expected revenue and non-GAAP diluted EPS results over the performance periods and calculated growth rates relative to its peers’ expected results based on data available, as defined in the respective award agreements.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

A summary of the Company’s performance-based restricted stock unit activity is as follows:


	Number of Shares (in thousands)	Weighted-Average Grant-Date Fair Value per Share
Outstanding at December 31, 2022	1,950	$	34.07
Granted(1)	1,039	32.66

Vested	(233)	20.89
Canceled	(3)	48.24
Outstanding at March 31, 2023	2,753	$	34.64

________________

(1) Number of shares granted is based on the maximum percentage achievable in the performance-based restricted stock unit award.

Employee Stock Purchase Rights and Stock Options

Employee Stock Purchase Rights

During the three months ended March 31, 2023 and 2022, there were no shares of common stock purchased under the ESPP.

The fair values of employee stock purchase rights for the latest ESPP offering period were estimated using the Black-Scholes option pricing model at their respective grant date using the following assumptions:


	Three Months Ended March 31,
	2023			2022
Weighted-average grant date fair value per share	$	11.97		$	18.82
Risk-free interest rate	4.54		%	0.06		%
Dividend yield	—		%	—		%
Expected life (in years)	0.50			0.50
Volatility	59.78		%	43.83		%

The risk-free interest rate assumption was based on rates for United States (U.S.) Treasury zero-coupon bonds with maturities similar to those of the expected term of the award being valued. The assumed dividend yield was based on the Company’s expectation of not paying dividends in the foreseeable future. The expected term is the duration of the offering period for each grant date. In addition, the estimated volatility incorporates the historical volatility over the expected term based on the Company’s daily closing stock prices.

Stock Options

A summary of the Company’s stock options activity is as follows:


	Number of Options (in thousands)	Weighted-Average Exercise Price		Weighted-Average Contractual Term (in years)	Aggregate Intrinsic Value (in thousands)
Outstanding at December 31, 2022	393	$	17.22


Exercised	(4)	12.14

Outstanding at March 31, 2023	389	$	17.27	2.20	$	6,972
Vested and expected to vest at March 31, 2023	389	$	17.27	2.20	$	6,972
Exercisable at March 31, 2023	389	$	17.27	2.20	$	6,972

No stock options were granted by the Company during the three months ended March 31, 2023.

The intrinsic value of stock options exercised was $0.1 million and $0.3 million in the three months ended March 31, 2023 and 2022, respectively.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

Cash received from exercise of stock options was $4.0 thousand and $0.1 million during the three months ended March 31, 2023 and 2022, respectively.

The tax benefit from stock options exercised was $0.1 million and $0.4 million during the three months ended March 31, 2023 and 2022, respectively.

10. Income Taxes

The provision for income taxes primarily relates to projected federal, state, and foreign income taxes. To determine the quarterly provision for income taxes, the Company uses an estimated annual effective tax rate, which is generally based on expected annual income and statutory tax rates in the various jurisdictions in which the Company operates. In addition, the tax effects of certain significant or unusual items are recognized discretely in the quarter during which they occur and can be a source of variability in the effective tax rates from quarter to quarter.

The Company utilizes the asset and liability method of accounting for income taxes, under which deferred taxes are determined based on temporary differences between the financial statement and tax basis of assets and liabilities using tax rates expected to be in effect during the years in which the temporary differences reverse. The Company records a valuation allowance to reduce its deferred taxes to the amount it believes is more likely than not to be realized. In making such determination, the Company considers all available positive and negative evidence quarterly, including scheduled reversals of deferred tax liabilities, projected future taxable income, tax planning strategies, and recent financial performance. Forming a conclusion that a valuation allowance is not required is difficult when there is negative evidence such as cumulative losses in recent years. Based upon the Company’s review of all positive and negative evidence, the Company continues to have a valuation allowance on its state deferred tax assets, certain of its federal deferred tax assets, and certain foreign deferred tax assets in jurisdictions where the Company has cumulative losses or otherwise is not expected to utilize certain tax attributes. The Company does not incur expense or benefit in certain tax-free jurisdictions in which it operates.

The Company recorded an income tax provision of $15.6 million in the three months ended March 31, 2023 and an income tax provision of $11.5 million in the three months ended March 31, 2022.

The difference between the Company’s effective tax rate and the 21.0% U.S. federal statutory rate for the three months ended March 31, 2023 primarily related to the mix of pre-tax income among jurisdictions, permanent tax items including a tax on global intangible low-taxed income, research and development credits, stock based compensation, excess tax benefits related to stock-based compensation, and release of uncertain tax positions under ASC 740-10. The permanent tax item related to global intangible low-taxed income also reflects recent legislative changes requiring the capitalization of research and experimentation costs, as well as limitations on the creditability of certain foreign income taxes.

The difference between the Company’s effective tax rate and the 21.0% U.S. federal statutory rate for the three months ended March 31, 2022 primarily related to the mix of pre-tax income among jurisdictions, permanent tax items including the tax on global intangible low-taxed income, stock based compensation, excess tax benefits related to stock-based compensation, and release of certain reserves for uncertain tax positions under ASC 740-10, and release of the valuation allowance on certain federal R&D credits.

Income tax positions must meet a more-likely-than-not threshold to be recognized. Income tax positions that previously failed to meet the more-likely-than-not threshold are recognized in the first subsequent financial reporting period in which that threshold is met. Previously recognized tax positions that no longer meet the more-likely-than-not threshold are derecognized in the first financial reporting period in which that threshold is no longer met. The Company records potential penalties and interest accrued related to unrecognized tax benefits within the consolidated statements of income as income tax expense.

During the three months ended March 31, 2023, the Company’s unrecognized tax benefits increased by $1.5 million. The Company does not expect its unrecognized tax benefits to change significantly over the next 12 months. Accrued interest and penalties associated with uncertain tax positions as of March 31, 2023 were approximately $0.4 million and $0.01 million, respectively.

The Company is subject to federal and state income tax in the United States and is also subject to income tax in certain other foreign tax jurisdictions. At March 31, 2023, the statutes of limitations for the assessment of federal, state, and foreign income taxes are closed for the years before 2019, 2018, and 2017, respectively.

The Company’s subsidiary in Singapore operates under certain tax incentives in Singapore, which are generally effective through March 2027, and are conditional upon meeting certain employment and investment thresholds in Singapore. Under the


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

incentives, qualifying income derived from certain sales of the Company’s integrated circuits is taxed at a concessionary rate over the incentive period, and there are reduced Singapore withholding taxes on certain intercompany royalties during the incentive period. The Company recorded a tax provision in the three months ended March 31, 2023 and 2022 at the incentive rate.

11. Concentration of Credit Risk, Significant Customers and Geographic Information

Financial instruments, which potentially subject the Company to concentrations of credit risk, consist primarily of cash and cash equivalents and accounts receivable. Collateral is generally not required for customer receivables. The Company limits its exposure to credit loss by placing its cash with high credit quality financial institutions. At times, such deposits may be in excess of insured limits. The Company has not experienced any losses on its deposits of cash and cash equivalents.

Significant Customers

The Company markets its products and services to manufacturers of a wide range of electronic devices (Note 1). The Company sells its products both directly to end-customers and through third-party distributors, both of which are referred to as the Company’s customers (Note 12). The Company makes periodic evaluations of the credit worthiness of its customers.

Customers comprising greater than 10% of net revenues for each of the periods presented are as follows:


	Three Months Ended March 31,
	2023		2022
Percentage of total net revenue
Customer A	*		16	%
Customer B	15	%	11	%
Customer C	*		10	%

____________________________

* Represents less than 10% of net revenues for the period presented.

The following table presents balances that are 10% or greater of accounts receivable, based on the Company’s billings to its customers.


	March 31,		December 31,
	2023		2022
Percentage of gross accounts receivable

Customer C	*		11	%

Customer D	20	%	12	%

Customer E	16	%	28	%

Customer F	11	%	*

____________________________

* Represents less than 10% of the gross accounts receivable as of the respective period end.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

Significant Suppliers

Suppliers comprising greater than 10% of total inventory purchases are as follows:


	Three Months Ended March 31,
	2023		2022
Vendor A	23	%	27	%
Vendor B	25	%	26	%
Vendor C	*		12	%
Vendor D	11	%	*

Geographic Information

The Company’s consolidated net revenues by geographic area based on ship-to location are as follows (in thousands):


	Three Months Ended March 31,
	2023				2022
	Amount		% of total net revenue		Amount		% of total net revenue
Asia	$	192,502	77	%	$	211,665	80	%
United States	12,184		5	%	8,868		3	%
Rest of world	43,755		18	%	43,394		17	%
Total	$	248,441	100	%	$	263,927	100	%

The products shipped to individual countries or territories representing greater than 10% of net revenue for each of the periods presented are as follows:


	Three Months Ended March 31,
	2023		2022
Percentage of total net revenue
Hong Kong	31	%	38	%
China	16	%	11	%
Vietnam	*		13	%

____________________________

* Represents less than 10% of the net revenue for the respective period.

The determination of which country a particular sale is allocated to is based on the destination of the product shipment. No other individual country accounted for more than 10% of net revenue during these periods. Although a large percentage of the Company’s products is shipped to Asia, and in particular, Hong Kong, mainland China and Vietnam, the Company believes that a significant number of the systems designed by customers and incorporating the Company’s semiconductor products are subsequently sold outside Asia to Europe, Middle East, and Africa markets and North American markets.

Long-lived assets, which consists of property and equipment, net, leased right-of-use assets, intangible assets, net, and goodwill by geographic area are as follows (in thousands):


	March 31,				December 31,
	2023				2022
	Amount		% of total		Amount		% of total
United States	$	370,191	71	%	$	368,882	70	%
Singapore	105,943		21	%	109,613		21	%
Rest of world	43,176		8	%	45,093		9	%
Total	$	519,310	100	%	$	523,588	100	%


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

12. Revenue from Contracts with Customers

Revenue by Market

The table below presents disaggregated net revenues by market (in thousands):


	Three Months Ended March 31,
	2023			2022

Broadband	$	81,681		$	134,556
% of net revenue	33		%	51		%
Connectivity	66,268			60,179
% of net revenue	27		%	23		%
Infrastructure	46,302			33,181
% of net revenue	18		%	12		%
Industrial and multi-market	54,191			36,011
% of net revenue	22		%	14		%
Total net revenue	$	248,442		$	263,927

Revenues from sales through the Company’s distributors accounted for 43% and 47% of net revenue for the three months ended March 31, 2023 and 2022, respectively.

Contract Liabilities

As of March 31, 2023 and December 31, 2022, customer contract liabilities were approximately $1.1 million and $1.1 million, respectively, and consisted primarily of advanced payments received for which performance obligations have not been completed. Revenue recognized in each of the three months ended March 31, 2023 and 2022 that was included in the contract liability balance as of the beginning of each of those respective periods was immaterial.

There were no material changes in the contract liabilities balance during the three months ended March 31, 2023 and 2022.

Obligations to Customers for Price Adjustments and Returns and Assets for Right-of-Returns

As of March 31, 2023 and December 31, 2022, obligations to customers consisting of estimates of price protection rights offered to the Company’s end customers totaled $103.8 million and $113.3 million, respectively, and are included in accrued price protection liability in the consolidated balance sheets. For activity in this account, including amounts included in net revenue, refer to Note 7. Other obligations to customers representing estimates of price adjustments to be claimed by distributors upon sell-through of their inventory to their end customer and estimates of stock rotation returns to be claimed by distributors on products sold as of March 31, 2023 were $62.3 million and $0.7 million, respectively, and as of December 31, 2022 were $52.4 million and $0.6 million, respectively, and are included in accrued expenses and other current liabilities in the consolidated balance sheets (Note 7). The increase in revenue in each of the three months ended March 31, 2023 and 2022 from net changes in transaction prices for amounts included in obligations to customers for price adjustments as of the beginning of those respective periods was not material.

As of March 31, 2023 and December 31, 2022, right of return assets under customer contracts representing the estimates of product inventory the Company expects to receive from customers in stock rotation returns were approximately $0.3 million and $0.2 million, respectively. Right of return assets are included in inventory in the consolidated balance sheets.

As of March 31, 2023 and December 31, 2022, there were no impairment losses recorded on customer accounts receivable.

13. Leases

Operating Leases

Operating lease arrangements primarily consist of office leases expiring in various years through 2028. These leases have original terms of approximately 2 to 8 years and some contain options to extend the lease up to 5 years or terminate the lease,


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

which are included in right-of-use assets and lease liabilities when the Company is reasonably certain it will renew the underlying leases. Since the implicit rate of such leases is unknown and the Company is not reasonably certain to renew its leases, the Company has elected to apply a collateralized incremental borrowing rate to facility leases on the original lease term in calculating the present value of future lease payments. As of March 31, 2023 and December 31, 2022, the weighted average discount rate for operating leases was 3.4% and 3.4%, respectively, and the weighted average remaining lease term for operating leases was 3.8 years and 3.9 years, respectively, as of the end of each of these periods.

The table below presents aggregate future minimum payments due under leases, reconciled to total lease liabilities included in the consolidated balance sheet as of March 31, 2023:


	Operating Leases
	(in thousands)
2023 (9 months)	$	8,444
2024	8,284
2025	7,335
2026	5,225
2027	3,520
Thereafter	571
Total minimum payments	33,379
Less: imputed interest	(2,082)

Total lease liabilities	31,302
Less: short-term lease liabilities	(10,063)
Long-term lease liabilities	$	21,239

Operating lease cost was $2.9 million and $2.5 million for the three months ended March 31, 2023 and 2022, respectively.

Short-term lease costs for the three months ended March 31, 2023 and 2022 were not material.

There were $0.2 million and $8.0 million of right-of-use assets obtained in exchange for new lease liabilities for the three months ended March 31, 2023 and 2022, respectively.

14. Employee Retirement Plans

Defined Contribution Plan

The Company has a 401(k) defined contribution retirement plan (the 401(k) Plan) covering all eligible employees. Participants may voluntarily contribute on a pre-tax basis an amount not to exceed a maximum contribution amount pursuant to Section 401(k) of the Internal Revenue Code. The Company is not required to contribute, nor has it contributed, to the 401(k) Plan for any of the periods presented.

Pension and Other Defined Benefit Retirement Obligations

The Company maintains defined benefit retirement plans, including a pension plan, in certain foreign jurisdictions. As of March 31, 2023 and December 31, 2022, the defined benefit obligation was $1.8 million and $1.7 million, respectively. The benefit is based on a formula applied to eligible employee earnings.

Net periodic benefit costs were $0.1 million and $0.1 million for the three months ended March 31, 2023 and 2022, respectively, and were recorded to research and development expenses in the consolidated statements of income.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

15. Commitments and Contingencies

Inventory Purchase and Other Contractual Obligations

As of March 31, 2023, future minimum payments under inventory purchase and other obligations are as follows:


	Inventory Purchase Obligations		Other Obligations		Total
2023 (9 months)	$	92,387	$	20,820	$	113,207
2024	27		10,558		10,585
2025	—		1,968		1,968



Total minimum payments	$	92,414	$	33,346	$	125,760

Other obligations consist primarily of contractual payments due for software licenses.

Jointly Funded Research and Development

From time to time, the Company enters into contracts for jointly funded research and development projects to develop technology that may be commercialized into a product in the future. As the Company may be required to repay all or a portion of the funds provided by the other parties under certain conditions, funds of $9.0 million received from the other parties as of March 31, 2023 have been deferred in other long-term liabilities. Additional amounts under the contracts are tied to certain milestones and will also be recorded as a long-term liability as payment due under such milestones are received. The Company de-recognizes the liabilities when the contingencies associated with the repayment conditions have been resolved. During the three months ended March 31, 2023 and 2022, the Company recognized $0 and $3.8 million, respectively, in previously deferred amounts from other parties due to resolution of such repayment conditions.

Bell Semiconductor Litigation

On August 11, 2022, Bell Semiconductor LLC, or Bell Semiconductor, filed suit against MaxLinear in the Southern District of California alleging infringement of U.S. Patent Nos. 6,436,807 and 7,007,259, and requested monetary damages and a permanent injunction as relief.

On August 26, 2022, Bell Semiconductor filed suit against MaxLinear in the Southern District of California alleging infringement of U.S. Patent Nos. 7,149,989 and 7,260,803, and requested monetary damages and a permanent injunction as relief.

On October 7, 2022 Bell Semiconductor filed suit against MaxLinear in the Southern District of California alleging infringement of U.S. Patent No. 7,396,760, and requested monetary damages and a permanent injunction as relief.

Specifically, on October 13, 2022, Bell Semiconductor also filed suit against MaxLinear before the U.S. International Trade Commission alleging infringement of U.S. Patent No. 7,396,760. This was instituted by the Commission as Investigation No. 337-TA-1342 on November 23, 2022. Bell Semiconductor requested as relief a limited exclusion order and cease and desist order.

On March 10, 2023, Bell Semiconductor and MaxLinear entered into a Settlement and Patent License Agreement, or the Settlement Agreement, in settlement and release of all claims above. The amount of the settlement was not material. The Settlement Agreement also grants MaxLinear and its affiliates, a license of certain listed patents with respected to certain licensed products for a term that continues until the expiration of the last surviving claim of such licensed patents.

Other Matters

From time to time, the Company is subject to threats of litigation or actual litigation in the ordinary course of business as described above and in “Part II. — Other Information, Item 1. — Legal Proceedings,” some of which may be material. The results of any litigation cannot be predicted with certainty, and regardless of the outcome, litigation can have a material adverse impact on the Company because of defense and settlement costs, diversion of management resources, and other factors. However, as of March 31, 2023, other than the matter described above, no material loss contingencies have been accrued for such matters in the Company’s financial statements.


Table of Contents			MAXLINEAR, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (unaudited)

16. Stock Repurchases

On February 23, 2021, the Company’s board of directors authorized a plan to repurchase up to $100 million of the Company’s common stock over a period ending on February 16, 2024. The amount and timing of repurchases are subject to a variety of factors including liquidity, share price, market conditions, and legal requirements. Any purchases will be funded from available working capital and may be effected through open market purchases, block transactions, and privately negotiated transactions. The share repurchase program does not obligate the Company to make any repurchases and may be modified, suspended, or terminated by the Company at any time without prior notice. The share repurchase program has been temporarily suspended since July 2022 due to the Company’s pending merger with Silicon Motion (Note 3).

During the three months ended March 31, 2023, the Company did not repurchase any shares of its common stock under the repurchase program.

At March 31, 2023, the aggregate value of common stock repurchased under the program was approximately $55.0 million and approximately $45.0 million remained available for repurchase under the program.

Table of Contents

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Forward-Looking Statements

The following discussion and analysis of the financial condition and results of our operations should be read in conjunction with the consolidated financial statements and related notes included elsewhere in this report. This discussion contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those discussed below. Factors that could cause or contribute to such differences include, but are not limited to, those identified below, and those discussed in the section titled “Risk Factors” included in Part II, Item 1A in this report.

Overview

We are a provider of communications systems-on-chip solutions used in broadband, mobile and wireline infrastructure, data center, and industrial and multi-market applications. We are a fabless integrated circuit design company whose products integrate all or substantial portions of a high-speed communication system, including radio frequency, or RF, high-performance analog, mixed-signal, digital signal processing, security engines, data compression and networking layers, and power management. In most cases, these products are designed on a single silicon-die, using standard digital complementary metal oxide semiconductor, or CMOS, processes and conventional packaging technologies. We believe this approach enables our solutions to achieve superior power, performance, and cost relative to our industry competition. Our customers include electronics distributors, module makers, original equipment manufacturers, or OEMs, and original design manufacturers, or ODMs, who incorporate our products in a wide range of electronic devices. Examples of such devices include cable Data Over Cable Service Interface Specifications, or DOCSIS, fiber and DSL broadband modems and gateways; Wi-Fi and wireline routers for home networking; radio transceivers and modems for 4G/5G base-station and backhaul infrastructure; fiber-optic modules for data center, metro, and long-haul transport networks; as well as power management and interface products used in these and many other markets.

Our highly integrated semiconductor devices and platform-level solutions are primarily manufactured using low-cost CMOS process technology. CMOS processes are ideally suited for large digital logic implementations targeting high-volume and low-cost consumer applications. Importantly, our ability to design analog and mixed-signal circuits in CMOS allows us to efficiently combine analog functionality and complex digital signal processing logic in the same integrated circuit. As a result, our solutions have exceptional levels of functional integration and performance, low manufacturing cost, and reduced power consumption. In addition, our proprietary CMOS-based radio and digital system architectures also enable shorter design cycles, significant design flexibility and low system-level cost across a wide range of broadband communications, wired and wireless infrastructure, and industrial and multi-market customer applications.

In the three months ended March 31, 2023, revenues of $248.4 million were derived in part from sales of RF receivers and RF receiver systems-on-chip and connectivity solutions into broadband operator voice and data modems and gateways and connectivity adapters, global analog and digital RF receiver products, radio and modem solutions into wireless carrier access and backhaul infrastructure platforms, high-speed optical interconnect solutions sold into optical modules for data-center, metro and long-haul networks, and high-performance interface and power management solutions into a broad range of communications, industrial, automotive and multi-market applications. Our ability to achieve revenue growth in the future will depend, among other factors, on our ability to further penetrate existing markets; our ability to expand our target addressable markets by developing new and innovative products; changes in government trade policies; changes in export control regulations; and our ability to obtain design wins with device manufacturers, in particular manufacturers of set-top boxes, data modems, and gateways for the broadband service provider, storage networking market, cable infrastructure market, industrial and automotive markets, and optical module and telecommunications infrastructure markets.

Products shipped to Asia accounted for 77% and 80% of net revenue during the three months ended March 31, 2023 and 2022, respectively, including 31% from products shipped to Hong Kong and 16% from products shipped to mainland China during the three months ended March 31, 2023 and 38% from products shipped to Hong Kong, 13% from products shipped to Vietnam, and 11% from products shipped to mainland China during the three months ended March 31, 2022. Although a large percentage of our products is shipped to Asia, we believe that a significant number of the systems designed by these customers and incorporating our semiconductor products are then sold outside Asia. For example, revenue generated from sales of our products during the three months ended March 31, 2023 and 2022 related principally to sales to Asian ODMs and contract manufacturers delivering products into European and North American markets. To date, all of our sales have been denominated in United States dollars.

Table of Contents

A significant portion of our net revenue has historically been generated by a limited number of customers. Sales to customers is comprised of both direct sales to customers and indirect sales through distributors. In the three months ended March 31, 2023, one customer accounted for 15% of our net revenue, and our ten largest customers collectively accounted for 62% of our net revenue, of which distributor customers accounted for 16% of our net revenue. For certain customers, we sell multiple products into disparate end user applications such as cable modems, satellite set-top boxes and broadband gateways.

Our business depends on winning competitive bid selection processes, known as design wins, to develop integrated circuits for use in our customers’ products. These selection processes are typically lengthy, and as a result, our sales cycles will vary based on the specific market served, whether the design win is with an existing or a new customer and whether our product being designed in our customer’s device is a first generation or subsequent generation product. Our customers’ products can be complex and, if our engagement results in a design win, can require significant time to define, design and result in volume production. Because the sales cycle for our products is long, we can incur significant design and development expenditures in circumstances where we do not ultimately recognize any revenue. We do not have any long-term purchase commitments with any of our customers, all of whom purchase our products on a purchase order basis. Once one of our products is incorporated into a customer’s design, however, we believe that our product is likely to remain a component of the customer’s product for its life cycle because of the time and expense associated with redesigning the product or substituting an alternative chip. Product life cycles in our target markets will vary by application. For example, in the cable operator modem and gateway sectors, a design-in can have a product life cycle of 24 to 48 months. In the industrial and wired and wireless infrastructure markets, a design-in can have a product life cycle of 24 to 60 months and beyond.

Impact of the Global Economic Downturn

Inflation, and uncertainty in customer demand and the worldwide economy has continued, and we expect to experience continued volatility in our sales and revenues in the near future. In particular, we believe an economic downturn and inventory oversupply, in the channel, due to changes in customer demand will continue to add to volatility in managing the business. In addition, inventory oversupply could also lead to inventory write-downs, including charges for any excess or obsolete inventory which, if material, could negatively impact our gross margins. However, the magnitude of such volatility on our business and its duration is uncertain and cannot be reasonably estimated at this time.

Silicon Motion Merger

On May 5, 2022, we entered into an agreement and plan of merger, or the Merger Agreement, with Silicon Motion Technology Corporation, or Silicon Motion, an exempted company with limited liability incorporated under the Law of the Cayman Islands, pursuant to which, subject to the terms and conditions thereof, we agreed to acquire Silicon Motion pursuant to a statutory merger of Shark Merger Sub, a wholly-owned subsidiary of MaxLinear, with and into Silicon Motion, with Silicon Motion surviving the merger as a wholly-owned subsidiary of MaxLinear. Silicon Motion is a provider of NAND flash controllers for solid state drives and other solid state storage devices.

Under the terms of the Merger Agreement, the transaction consideration will consist of $93.54 in cash and 0.388 shares of our stock for each Silicon Motion American Depositary Share, or ADS, and $23.385 in cash and 0.097 shares of our common stock for each Silicon Motion ordinary share not represented by an ADS. Upon closing of the transaction, our current stockholders will own approximately 86% of the combined company and former Silicon Motion securityholders will own approximately 14% of the combined company. Based on the closing price of our common shares on May 4, 2022, the implied value of the total transaction consideration for Silicon Motion is approximately $4.3 billion. We may fund up to $3.5 billion of cash consideration with cash on hand and fully committed debt financing from Wells Fargo Bank, N.A., or Wells Fargo Bank, and other lenders as described below. We will also assume Silicon Motion’s vested and unvested employee stock-based compensation awards.

The merger is not subject to any financing conditions but is pending satisfaction of customary closing conditions, including antitrust approval in the People’s Republic of China, or China. On June 27, 2022, the Hart-Scott-Rodino Antitrust Improvements Act of 1976, or HSR, waiting period expired with respect to the pending merger; however, if the merger is not consummated by June 27, 2023, the parties will need to re-file under the HSR Act. On July 13, 2022, the Form S-4 was declared effective by the SEC. On August 31, 2022, the Silicon Motion securityholders approved the merger at the extraordinary general meeting.

Table of Contents

On June 17, 2022, we entered into an amended and restated commitment letter with Wells Fargo Bank and other lenders pursuant to which, subject to the terms and conditions set forth therein, the lenders have committed to provide (i) a senior secured term B loan facility in an aggregate principal amount of up to $2.7375 billion (ii) a senior secured term A loan facility in an aggregate principal amount of up to $512.5 million and (iii) a senior secured revolving credit facility in an aggregate principal amount of up to $250.0 million, which we collectively refer to as the Senior Secured Credit Facilities. The funding of the Senior Secured Credit Facilities is contingent on the satisfaction of customary conditions, including (i) the execution and delivery of definitive documentation with respect to credit facilities in accordance with the terms in the amended and restated commitment letter, and (ii) the consummation of the acquisition by us of Silicon Motion in accordance with the Merger Agreement. A portion of the proceeds from the Senior Secured Credit Facilities will be used to repay existing debt in full.

Recent Developments

Acquisition of Company Y

Company Y is headquartered in Bangalore, India and operates as a provider of engineering design services.

Critical Accounting Policies and Estimates

Management’s discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements which are prepared in accordance with accounting principles that are generally accepted in the United States of America. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets and liabilities, related disclosure of contingent assets and liabilities at the date of the consolidated financial statements, and the reported amounts of revenues and expenses during the reporting period. We continually evaluate our estimates and judgments, the most critical of which are those related to business combinations, revenue recognition, inventory valuation, production masks, goodwill and other intangible assets valuation, and income taxes. We base our estimates and judgments on historical experience and other factors that we believe to be reasonable under the circumstances. Materially different results can occur as circumstances change and additional information becomes known.

We believe that accounting policies we have identified as critical involve a greater degree of judgment and complexity than our other accounting policies. Accordingly, those are the policies we believe are the most critical to understanding and evaluating our consolidated financial condition and results of operations.

For a summary of our critical accounting policies and estimates, refer to Management’s Discussion and Analysis section of our Annual Report on Form 10-K for the year ended December 31, 2022, which we filed with the Securities and Exchange Commission, or SEC, on February 1, 2023, or our Annual Report. There have been no material changes to our critical accounting policies and estimates during the three months ended March 31, 2023.

Recently Issued Accounting Pronouncements

See Note 1 to our consolidated financial statements included elsewhere in this Quarterly Report on Form 10-Q for recently issued accounting pronouncements not yet adopted as of the date of this report.

Results of Operations

The following describes the line items set forth in our unaudited consolidated statements of income.

Net Revenue. Net revenue is generated from sales of radio-frequency, analog, digital, and mixed-signal integrated circuits for access and connectivity, wired and wireless infrastructure, and industrial and multi-market applications. A significant portion of our sales are to distributors, who then resell our products.

Table of Contents

Cost of Net Revenue. Cost of net revenue includes the cost of finished silicon wafers processed by third-party foundries; costs associated with our outsourced packaging and assembly, test and shipping; costs of personnel, including stock-based compensation, and equipment associated with manufacturing support, logistics and quality assurance; amortization of acquired developed technology intangible assets and certain purchased licensed technology intangible assets; amortization of certain production mask costs and computer-aided design software license costs; cost of production load boards and sockets; and an allocated portion of our occupancy costs.

Research and Development. Research and development expense includes personnel-related expenses, including salaries and benefits and stock-based compensation, new product engineering mask costs, prototype integrated circuit packaging and test costs, computer-aided design software license costs, intellectual property license costs, reference design development costs, development testing and evaluation costs, depreciation expense and allocated occupancy costs. Research and development activities include the design of new products, refinement of existing products and design of test methodologies to ensure compliance with required specifications. All research and development costs are expensed as incurred.

Selling, General and Administrative. Selling, general and administrative expense includes personnel-related expenses, including salaries and benefits and stock-based compensation, amortization of certain acquired intangible assets, merger, acquisition and integration costs, third-party sales commissions, field application engineering support, travel costs, professional and consulting fees, legal fees, depreciation expense and allocated occupancy costs.

Impairment Losses. Impairment losses consist of charges resulting from the impairment of intangible assets.

Restructuring Charges. Restructuring charges consist of severance, lease and leasehold impairment charges, and other charges related to restructuring plans.

Interest and Other Income (Expense), Net. Interest and other income (expense), net includes interest income, interest expense and other income (expense). Interest income consists of interest earned on our cash, cash equivalents and restricted cash balances. Interest expense consists of interest accrued on debt and amortization of discounts on debt and other liabilities. Other income (expense) generally consists of income (expense) generated from non-operating transactions and unrealized holding gains (losses) from certain investments required to be marked to market value.

Income Tax Provision. We make certain estimates and judgments in determining income taxes for financial statement purposes. These estimates and judgments occur in the calculation of certain tax assets and liabilities, which arise from differences in the timing of recognition of revenue and expenses for tax and financial statement purposes and the realizability of assets in future years.

Table of Contents

The following table sets forth our consolidated statement of income data as a percentage of net revenue for the periods indicated:


	Three Months Ended March 31,
		2023		2022
Net revenue		100	%	100	%
Cost of net revenue		44		41
Gross profit		56		59
Operating expenses:
Research and development		27		25
Selling, general and administrative		16		15
Impairment losses		1		—
Restructuring charges		2		—
Total operating expenses		45		40
Income from operations		11		18
Interest income		—		—
Interest expense		(1)		(1)

Other income (expense), net		—		—
Total other income (expense), net		(1)		(1)
Income before income taxes		10		17
Income tax provision		6		4
Net income		4	%	13	%

Net Revenue


		Three Months Ended March 31,
			2023			2022			$ Change		% Change
	(dollars in thousands)
Broadband			$	81,681		$	134,556		$	(52,875)		(39)	%
% of net revenue			33		%	51		%
Connectivity			66,268			60,179			6,089			10	%
% of net revenue			27		%	23		%
Infrastructure			46,302			33,181			13,121			40	%
% of net revenue			18		%	12		%
Industrial and multi-market			54,191			36,011			18,180			50	%
% of net revenue			22		%	14		%
Total net revenue			$	248,442		$	263,927		$	(15,485)		(6)	%

Net revenue decreased $15.5 million to $248.4 million for the three months ended March 31, 2023, as compared to $263.9 million for the three months ended March 31, 2022, due primarily to a decrease in broadband products, as a result of macroeconomic conditions impacting customer demand for such products. The decrease in broadband net revenue of $52.9 million was primarily from gateway revenues, and to a lesser extent, cable, tuners and satellite. The increase in connectivity revenue of $6.1 million was primarily driven by higher Wi-Fi revenues. The increase in infrastructure revenues of $13.1 million was primarily driven by an increase in wireless backhaul and high-performance analog product shipments. The increase in industrial and multi-market revenue of $18.2 million was related to increased shipments of component and high-performance analog products.

We currently expect that revenue will fluctuate in the future, from period-to-period, due to macroeconomic conditions impacting customer demand for certain products that is consistent with the cyclical nature of our industry.

Table of Contents

Cost of Net Revenue and Gross Profit


		Three Months Ended March 31,
			2023			2022		$ Change	% Change
	(dollars in thousands)
Cost of net revenue			$	108,135		109,337		(1,202)		(1)	%
% of net revenue			44		%	41	%
Gross profit			140,307			154,590		(14,283)		(9)	%
% of net revenue			56		%	59	%

Cost of net revenue decreased $1.2 million to $108.1 million for the three months ended March 31, 2023, as compared to $109.3 million for the three months ended March 31, 2022. The decrease was primarily driven by lower sales and expenses. Gross profit percentage declined for the three months ended March 31, 2023, as compared to the three months ended March 31, 2022, due primarily to revenue mix and decreased absorption of amortization of intangible assets.

We currently expect that gross profit percentage will fluctuate in the future, from period-to-period, based on changes in product mix, average selling prices, and average manufacturing costs.

Research and Development


		Three Months Ended March 31,
			2023			2022			$ Change		% Change
	(dollars in thousands)
Research and development			$	67,291		$	65,886		$	1,405		2	%
% of net revenue			27		%	25		%

Research and development expense increased $1.4 million to $67.3 million for the three months ended March 31, 2023, as compared to $65.9 million for the three months ended March 31, 2022. The increase was primarily driven by increased design tools expenses, partially offset by the impact from the decrease in headcount from a reduction in force.

We are closely managing our research and development expenses to meet evolving demand; however, we expect our research and development expenses to increase in future years when we expand our product portfolio and enhance existing products.

Selling, General and Administrative


		Three Months Ended March 31,
			2023			2022			$ Change		% Change
	(dollars in thousands)
Selling, general and administrative			$	38,653		$	40,577		$	(1,924)		(5)	%
% of net revenue			16		%	15		%

Selling, general and administrative expense decreased $1.9 million to $38.7 million for the three months ended March 31, 2023, as compared to $40.6 million for the three months ended March 31, 2022. The decrease was primarily due to decreased amortization of intangibles and stock based-compensation expenses, partially offset by increased professional services and acquisition and integration costs.

We are closely managing our selling, general and administrative expenses; however, we expect selling, general and administrative expenses to increase in future years when we grow our sales and marketing organization to expand into existing and new markets.

Table of Contents

Impairment losses



		Three Months Ended March 31,
			2023			2022			$ Change		% Change
	(dollars in thousands)
Impairment losses			$	2,438		$	—		$	2,438	N/A
% of net revenue			1		%	—		%

Impairment losses in the three months ended March 31, 2023 related to abandonment of certain intellectual property licenses.

Restructuring Charges


	Three Months Ended March 31,
		2023			2022			$ Change	% Change
	(dollars in thousands)
Restructuring charges		$	4,648		$	—		$4,648	N/A
% of net revenue		2		%	—		%

Restructuring charges increased $4.6 million to $4.6 million for the three months ended March 31, 2023, compared to $0 for the three months ended March 31, 2022. Restructuring charges in the three months ended March 31, 2023 consisted primarily of $4.6 million of employee severance-related charges from a reduction in force.

Interest and Other Income (Expense)


	Three Months Ended March 31,
		2023			2022			$ Change		% Change
	(dollars in thousands)



Interest and other income (expense), net		$	(2,178)		$	(3,088)		$	910	(29)	%
% of net revenue		(1)		%	(1)		%

Interest and other income (expense), net changed by $0.9 million from a net expense of $3.1 million in the three months ended March 31, 2022 to a net expense of $2.2 million for the three months ended March 31, 2023. The change in interest and other income (expense), net was primarily due to the impact of a $0.6 million increase in interest income plus a $0.4 million change in other income (expense), net, from expense of $0.8 million in the 2022 period to expense of $0.3 million in the 2023 period.

The $0.6 million increase in interest income is due to higher interest rates on a higher balance of interest bearing cash equivalents. The $0.4 million change in other income (expense), net primarily related to $0.7 million impact from foreign currency fluctuations, partially offset by $1.1 million impact of change from $1.0 million in net unrealized holding gain in the 2022 period to net unrealized holding loss of $0.2 million recognized on equity securities that are marked to market value in other income (expense), net.

Income Tax Provision


	Three Months Ended March 31,
		2023		2022		$ Change		% Change
	(dollars in thousands)
Income tax provision		$	15,566	$	11,453	$	4,113	36	%

Table of Contents

The income tax provision for the three months ended March 31, 2023 was $15.6 million compared to an income tax provision of $11.5 million for the three months ended March 31, 2022.

The difference between our effective tax rate and the 21.0% U.S. federal statutory rate for the three months ended March 31, 2023 primarily related to the mix of pre-tax income among jurisdictions, permanent tax items including a tax on global intangible low-taxed income, research and development credits, stock based compensation, excess tax benefits related to stock-based compensation, and the release of uncertain tax positions under ASC 740-10. The permanent tax item related to global intangible low-taxed income also reflects recent legislative changes requiring the capitalization of research and experimentation costs, as well as limitations on the creditability of certain foreign income taxes.

The difference between our effective tax rate and the 21.0% U.S. federal statutory rate for the three months ended March 31, 2022 primarily related to the mix of pre-tax income among jurisdictions, permanent tax items including the tax on global intangible low-taxed income, stock based compensation, excess tax benefits related to stock-based compensation, release of certain reserves for uncertain tax positions under ASC 740-10, and release of the valuation allowance on certain federal R&D credits. The permanent tax item related to global intangible low-taxed income also reflects recent legislative changes requiring the capitalization of research and experimentation costs, as well as limitations on the creditability of certain foreign income taxes.

We continue to maintain a valuation allowance to offset state and certain federal and foreign deferred tax assets, as realization of such assets does not meet the more-likely-than-not threshold required under accounting guidelines. In making such determination, we consider all available positive and negative evidence quarterly, including scheduled reversals of deferred tax liabilities, projected future taxable income, tax planning strategies, and recent financial performance. Based upon our review of all positive and negative evidence, we continue to have a valuation allowance on state deferred tax assets, certain federal deferred tax assets, and certain foreign deferred tax assets in jurisdictions where we have cumulative losses or otherwise are not expected to utilize certain tax attributes. We do not incur income tax expense or benefit in certain tax-free jurisdictions in which we operate.

Our subsidiary in Singapore operates under certain tax incentives in Singapore, which are effective through March 2027. Under these incentives, qualifying income derived from certain sales of our integrated circuits is taxed at a concessionary rate over the incentive period. We also receive a reduced withholding tax rate on certain intercompany royalty payments made by our Singapore subsidiary during the incentive period. We recorded a tax provision in the three months ended March 31, 2023 and 2022 at the incentive rate. The incentives are conditional upon our meeting certain minimum employment and investment thresholds within Singapore over time, and we may be required to return certain tax benefits in the event we do not achieve compliance related to that incentive period. We currently believe that we will be able to satisfy these conditions without material risk.

Liquidity and Capital Resources

As of March 31, 2023, we had cash and cash equivalents of $207.9 million, restricted cash of $1.0 million and net accounts receivable of $188.7 million. Additionally, as of March 31, 2023, our working capital was $293.4 million.

Our primary uses of cash are to fund operating expenses and purchases of inventory, property and equipment, and from time to time, the acquisition of businesses. In May 2022, we entered into the Merger Agreement to acquire Silicon Motion. As described in Note 3 to our unaudited consolidated financial statements, the implied value of the total transaction consideration for Silicon Motion is approximately $4.3 billion. MaxLinear may fund up to $3.5 billion of cash consideration with cash on hand and fully committed debt financing from Wells Fargo Bank and other lenders. In June 2022 and October 2022, we amended and restated the commitment letter with Wells Fargo Bank and other lenders pursuant to which, subject to the terms and conditions set forth therein, the lenders have committed to provide (i) a senior secured term B loan facility in an aggregate principal amount of up to $2.7375 billion (ii) a senior secured term A loan facility in an aggregate principal amount of up to $512.5 million and (iii) a senior secured revolving credit facility in an aggregate principal amount of up to $250.0 million. Funding of the Senior Secured Credit Facilities is contingent on customary conditions, including, but not limited to the consummation of the merger and execution of definitive loan agreements. A portion of the proceeds from the Senior Secured Credit Facilities will be used to repay our existing debt in full.

We also use cash to pay down outstanding debt, and from time to time, make investments. As of March 31, 2023, $125.0 million of principal was outstanding under a senior secured term B loan facility or the “Initial Term Loan under the June 23, 2021 Credit Agreement.” The Company also has available a senior secured revolving credit facility, in an aggregate principal

Table of Contents

amount of up to $100.0 million which remained undrawn as of March 31, 2023. The proceeds of the revolving facility may be used to finance the working capital needs and other general corporate purposes of the Company and its subsidiaries.

Commencing on September 30, 2021, the Initial Term Loan under the June 23, 2021 Credit Agreement has amortized in equal quarterly installments equal to 0.25% of the original principal amount of the Initial Term Loan under the June 23, 2021 Credit Agreement, with the balance payable on June 23, 2028. We could be subject to substantial variable interest rate risk because our interest rate under term loans typically vary based on a fixed margin over an indexed rate or an adjusted base rate. While we are mitigating the impact of rising interest rates with large amounts of prepayments on our outstanding debt, if interest rates were to further increase substantially, particularly with respect to our anticipated debt associated with the Silicon Motion merger, it would have a material adverse effect our operating results and could affect our ability to service the indebtedness. Please refer to the Risk Factor entitled “In order to consummate the merger and distribute the cash consideration payable to Silicon Motion securityholders, we will incur material indebtedness of up to $3.5 billion and we may also use a portion of Silicon Motion’s and our cash resources, and we may decide to issue additional shares of our common stock to reduce our overall leverage ratio. This material increase in our indebtedness will adversely affect our operating results and cash-flows as we satisfy our underlying interest and principal payment obligations. Issuing additional shares of our common stock, if material, will result in dilution of existing shares outstanding. The loan agreement is also expected to contain financial and operational covenants that would adversely affect our operational freedom or ability to pursue strategic transactions that we would otherwise consider to be in the best interests of stockholders, including obtaining additional indebtedness to finance such transactions” for a discussion for a discussion of how our indebtedness could have a material adverse effect on our liquidity and capital resources.

Our future capital requirements will depend on many factors, including changes in revenue, the expansion of our engineering, sales and marketing activities, the timing and extent of our expansion into new territories, the timing of introductions of new products and enhancements to existing products, the continuing market acceptance of our products, our pending merger with Silicon Motion, and any other potential material investments in, or acquisitions of, complementary businesses, services or technologies. Additional funds may not be available on terms favorable to us or at all. If we are unable to raise additional funds when needed, we may not be able to sustain our operations or execute our strategic plans.

Our cash and cash equivalents are impacted by the timing of when we pay expenses as reflected in the change in our outstanding accounts payable and accrued expenses. Cash used to fund operating expenses in our consolidated statements of cash flows excludes the impact of non-cash items such as amortization and depreciation of acquired intangible assets and leased right-of-use assets and property and equipment, stock-based compensation, impairment of intangible assets and unrealized holding gains or losses on marketable equity securities. Cash used to fund capital purchases and acquisitions of businesses and investments are included in investing activities in our consolidated statements of cash flows. Cash proceeds from issuance of common stock and debt and cash used to pay down outstanding debt are included in financing activities in our consolidated statements of cash flows.

As of March 31, 2023, our material cash requirements include long-term debt, non-cancelable operating leases, inventory purchase obligations and other obligations, which primarily consist of contractual payments due for computer-aided design software, as follows:


	Payments due
	Total		Less than 1 year		2-3 years		4-5 years		More than 5 years
	(in thousands)
Long-term debt obligations	$	125,000	$	—	$	—	$	—	$	125,000
Operating lease obligations	33,379		8,444		15,619		8,745		571
Inventory purchase obligations	92,414		92,387		27		—		—
Other obligations	33,346		20,820		12,526		—		—
Total	$	284,139	$	121,651	$	28,172	$	8,745	$	125,571

Our planned capital expenditures as of March 31, 2023 were not material. Our consolidated balance sheet at March 31, 2023 included $6.4 million in other long-term liabilities for uncertain tax positions, some of which may result in cash payment. The future payments related to uncertain tax positions recorded as other long-term liabilities have not been presented in the table above due to the uncertainty of the amounts and timing of cash settlement with the taxing authorities.

Table of Contents

Our primary sources of cash are cash receipts on accounts receivable from our shipment of products to distributors and direct customers. Aside from the amounts billed to our customers, net cash collections of accounts receivable are impacted by the efficiency of our cash collections process, which can vary from period to period depending on the payment cycles of our major distributor customers, and relative linearity of shipments period-to-period. The June 23, 2021 Credit Agreement, under which we entered into a senior secured term B loan facility and a revolving credit facility, permits us to request incremental loans in an aggregate principal amount not to exceed the sum of an amount equal to the greater of (x) $175.0 million and (y) 100% of “Consolidated EBITDA” (as defined in such agreement), plus the amount of certain voluntary prepayments, plus an unlimited amount that is subject to pro forma compliance with certain first lien net leverage ratio, secured net leverage ratio and total net leverage ratio tests.

Following is a summary of our working capital, cash and cash equivalents, and restricted cash for the periods indicated:


	March 31, 2023		December 31, 2022
	(in thousands)
Working capital	$	293,424	$	222,038
Cash and cash equivalents	$	207,850	$	187,353
Short-term restricted cash	964		982
Long-term restricted cash	22		22

Total cash, cash equivalents, and restricted cash	$	208,836	$	188,357

Following is a summary of our cash flows provided by (used in) operating activities, investing activities and financing activities for the periods indicated:


	Three Months Ended March 31,
	2023		2022
	(in thousands)
Net cash provided by operating activities	$	42,159	$	134,166
Net cash used in investing activities	(15,511)		(42,762)
Net cash used in financing activities	(6,170)		(70,659)
Effect of exchange rate changes on cash, cash equivalents and restricted cash	1		(230)
Increase in cash, cash equivalents and restricted cash	$	20,479	$	20,515

Cash Flows from Operating Activities

Net cash provided by operating activities was $42.2 million for the three months ended March 31, 2023. Net cash provided by operating activities consisted of positive impact of net income of $9.5 million, non-cash items of $38.9 million, and changes in operating assets and liabilities of $13.9 million and excess tax benefits and deferred income taxes totaling $7.6 million. Non-cash items included in net income for the three months ended March 31, 2023 primarily consisted of depreciation and amortization of property, equipment, acquired intangible assets and leased right-of-use assets of $19.2 million, stock-based compensation of $16.4 million, and impairment losses of $2.4 million.

Net cash provided by operating activities was $134.2 million for the three months ended March 31, 2022. Net cash provided by operating activities consisted of positive impact of net income of $33.6 million, non-cash items of $43.7 million, and changes in operating assets and liabilities of $57.1 million, partially offset by excess tax benefits and deferred income taxes totaling $0.3 million. Non-cash items included in net income for the three months ended March 31, 2022 primarily consisted of depreciation and amortization of property, equipment, acquired intangible assets and leased right-of-use assets of $23.9 million and stock-based compensation of $18.6 million.

Cash Flows from Investing Activities

Net cash used in investing activities was $15.5 million for the three months ended March 31, 2023 and consisted of cash used in acquisition of Company Y of $9.7 million and purchases of property and equipment of $5.2 million.

Table of Contents

Net cash used in investing activities was $42.8 million for the three months ended March 31, 2022 and consisted of purchases of long-term investments in a private entity of $23.3 million, proceeds loaned under notes receivable of $10.0 million, purchases of property and equipment of $4.8 million, and purchases of intangible assets of $4.6 million.

Cash Flows from Financing Activities

Net cash used in financing activities was $6.2 million for the three months ended March 31, 2023. Net cash used in financing activities consisted primarily of minimum tax withholding paid on behalf of employees for restricted stock units of $6.2 million.

Net cash used in financing activities was $70.7 million for the three months ended March 31, 2022. Net cash used in financing activities consisted primarily of common stock repurchases of $26.3 million, minimum tax withholding paid on behalf of employees for restricted stock units of $24.4 million, and repayments of debt of $20.0 million.

We believe that our $207.9 million of cash and cash equivalents at March 31, 2023 will be sufficient to fund our projected operating requirements for at least the next twelve months, excluding anticipated cash expenditures for the pending merger and related integration costs which will be financed primarily through additional debt under the Senior Secured Credit Facilities. As of March 31, 2023, our indebtedness totaled $125.0 million, which consists of outstanding principal under the Initial Term Loan under the June 23, 2021 Credit Agreement. Upon consummation of our merger with Silicon Motion and execution of related merger financing agreements, we expect that a portion of the proceeds from the Senior Secured Credit Facilities associated with the merger, described in more detail above, will be used to repay our existing indebtedness in full, and our indebtedness may increase up to $3.5 billion under the Senior Secured Credit Facilities. The June 23, 2021 Credit Agreement also provides the Company with the Revolving Facility in an aggregate principal amount of up to $100.0 million, which remained undrawn as of March 31, 2023. The Initial Term Loan under the June 23, 2021 Credit Agreement has a seven-year term expiring in June 2028 and bears interest, at the Company’s option, at a per annum rate equal to either (i) a base rate equal to the highest of (x) the federal funds rate, plus 0.50%, (y) the prime rate then in effect and (z) an adjusted LIBOR rate determined on the basis of a one-month interest period plus 1.00%, in each case, plus an applicable margin of 1.25% or (ii) an adjusted LIBOR rate, subject to a floor of 0.50%, plus an applicable margin of 2.25%. Loans under the Revolving Facility initially bear interest, at a per annum rate equal to either (i) a base rate (as calculated above) plus an applicable margin of 0.00%, or (ii) an adjusted LIBOR rate (as calculated above) plus an applicable margin of 1.00%. Following delivery of financial statements for the Company’s fiscal quarter ending June 30, 2021, the applicable margin for loans under the Revolving Facility will range from 0.00% to 0.75% in the case of base rate loans and 1.00% to 1.75% in the case of LIBOR rate loans, in each case, depending on the Company’s secured net leverage ratio as of the most recently ended fiscal quarter. The Company is required to pay commitment fees ranging from 0.175% to 0.25% per annum on the daily undrawn commitments under the Revolving Facility, depending on the Company’s secured net leverage ratio as of the most recently ended fiscal quarter. Commencing on September 30, 2021, the Initial Term Loan under the June 23, 2021 Credit Agreement amortizes in equal quarterly installments equal to 0.25% of the original principal amount, with the balance payable at maturity on June 23, 2028. The June 23, 2021 Credit Agreement contains customary provisions specifying alternative interest rate calculations to be employed at such time as LIBOR ceases to be available as a benchmark for establishing the interest rate on floating interest rate borrowings.

Our cash and cash equivalents in recent years have been favorably affected by our implementation of an equity-based bonus program for our employees, including executives. In connection with that bonus program, in February 2023, we issued 0.9 million freely-tradable (subject to restrictions for affiliates) shares of our common stock in settlement of bonus awards for the 2022 performance period. We expect to implement a similar equity-based plan for fiscal 2023, but our compensation committee retains discretion to effect payment in cash, stock, or a combination of cash and stock.

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Market risk represents the risk of loss that may impact our financial position due to adverse changes in financial market prices and rates. Our market risk exposure is primarily a result of fluctuations in foreign currency exchange rates and interest rates.

Table of Contents

Foreign Currency Risk

To date, our international customer and vendor agreements have been denominated mostly in United States dollars. Accordingly, we have limited exposure to foreign currency exchange rates and do not enter into foreign currency hedging transactions. The functional currency of certain foreign subsidiaries is the local currency. Accordingly, the effects of exchange rate fluctuations on the net assets of these foreign subsidiaries’ operations are accounted for as translation gains or losses in accumulated other comprehensive income (loss) within stockholders’ equity. A hypothetical change of 100 basis points in such foreign currency exchange rates during the three months ended March 31, 2023 would result in a change to translation gain in accumulated other comprehensive income (loss) of approximately $0.9 million.

Interest Rate Risk

We are subject to a variable amount of interest on the principal balance of our credit agreements described above and could be adversely impacted by rising interest rates in the future. If LIBOR interest rates had increased by 10% during the three months ended March 31, 2023, the rate increase would have resulted in an immaterial increase to interest expense. We are currently mitigating the impact of rising interest rates with prepayments of principal on our indebtedness and we believe our operating cash held primarily for working capital purpose is sufficient to cover our interest obligations.

ITEM 4. CONTROLS AND PROCEDURES

Evaluation of Disclosure and Procedures

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our periodic reports filed with the SEC is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC and that such information is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate, to allow for timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and no evaluation of controls and procedures can provide absolute assurance that all control issues and instances of fraud, if any, within a company have been detected. Management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

As required by Rule 13a-15(b) of the Securities Exchange Act of 1934, as amended, or the Exchange Act, prior to filing this Quarterly Report, we carried out an evaluation, under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Exchange Act) as of the end of the period covered by this Quarterly Report. Based on their evaluation, our principal executive officer and principal financial officer concluded that our disclosure controls and procedures were effective as of the end of the period covered by this Quarterly Report to provide reasonable assurance that information we are required to disclose in reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in SEC rules and forms, and that such information is accumulated and communicated to our management, including our CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure.

Changes in Internal Control over Financial Reporting

An evaluation was performed under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, to determine whether any change in our internal control over financial reporting occurred during the fiscal quarter ended March 31, 2023 that materially affected, or is reasonably likely to materially affect, our internal control over financial reporting. There were no changes in our internal control over financial reporting identified in connection with the evaluation required by paragraph (d) of Rule 13a-15 or Rule 15d-15 of the Securities Exchange Act of 1934, as amended, that occurred during the fiscal quarter ended March 31, 2023 that materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Table of Contents

PART II — OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

Bell Semiconductor Litigation

Specifically, on October 13, 2023, Bell Semiconductor also filed suit against MaxLinear before the U.S. International Trade Commission alleging infringement of U.S. Patent No. 7,396,760. This was instituted by the Commission as Investigation No. 337-TA-1342 on November 23, 2022. Bell Semiconductor requested as relief a limited exclusion order and cease and desist order.

On March 10, 2023, Bell Semiconductor and MaxLinear entered into a Settlement and Patent License Agreement, or the Settlement Agreement, in settlement and release of all claims above. The Settlement Agreement also grants MaxLinear and its affiliates, a license of certain listed patents with respected to certain licensed products for a term that continues until the expiration of the last surviving claim of such licensed patents.

Other Matters

From time to time, the Company is subject to threats of litigation or actual litigation in the ordinary course of business as described above, some of which may be material. The results of any litigation cannot be predicted with certainty, and regardless of the outcome, litigation can have a material adverse impact on the Company because of defense and settlement costs, diversion of management resources, and other factors. However, as of March 31, 2023, other than the matter described above, no material loss contingencies have been accrued for such matters in the Company’s financial statements.

Table of Contents

ITEM 1A. RISK FACTORS

This Quarterly Report on Form 10-Q, or Form 10-Q, including any information that may be incorporated by reference herein, contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, referred to as the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, referred to as the Exchange Act. In some cases, you can identify forward-looking statements by terms such as “may,” “will,” “should,” “expect,” “plan,” “intend,” “forecast,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” “continue” or the negative of these terms or other comparable terminology. The forward-looking statements contained in this Form 10-Q involve known and unknown risks, uncertainties and situations that may cause our or our industry’s actual results, level of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these statements. These factors include those listed below in this Part II, Item 1A and those discussed elsewhere in this Form 10-Q. We encourage investors to review these factors carefully. We may from time to time make additional written and oral forward-looking statements, including statements contained in our filings with the SEC. However, we do not undertake to update any forward-looking statement that may be made from time to time by or on behalf of us, whether as a result of new information, future events, or otherwise, except as required by law.

The following discussion provides information concerning the material risks and uncertainties that we have identified and believe may adversely affect our business, our financial condition and our results of operations. Before you decide whether to invest in our securities, you should carefully consider these risk factors together with all of the other information included in this Quarterly Report on Form 10-Q, and in our other public filings, which could materially affect our business, financial condition or future results. Our risk factors are not guarantees that no such conditions exist as of the date of this report and should not be interpreted as an affirmative statement that such risks or conditions have not materialized, in whole or in part.

For the risks relating to our pending merger with Silicon Motion, please refer to the section of these risk factors captioned “Risks Relating to the Proposed Merger with Silicon Motion.”

Risk Factor Summary

Risks Relating to the Proposed Merger with Silicon Motion

•If the merger is completed, our actual results could differ materially from any expectations or guidance, including with respect to any cost savings and other potential synergies.

•Failure to integrate Silicon Motion with our business successfully in the expected timeframe may adversely affect our results and financial condition if the merger is completed.

•Our business relationships, including customer relationships, and those of Silicon Motion, may be subject to disruption due to uncertainty associated with the merger.

•Motivating and retaining senior management and other key personnel may be difficult in light of the pending merger.

•The merger agreement contains provisions that could require us to pay Silicon Motion a termination fee of $160 million under certain circumstances.

•If the proposed merger is not completed, we will have incurred substantial costs that may adversely affect our operating results and financial condition, as well as the market price of our common stock.

•Our ability to complete the merger is subject to various closing conditions, including antitrust approval by SAMR in China, which may contain burdensome conditions that could have a material adverse effect on our operation of the business following the merger.

•As a result of the transaction, we will materially increase our indebtedness which adversely affects our operating results and cash flows and our new loan agreements will likely contain covenants that could adversely affect our operational freedom and ability to pursue strategic transactions.

•Servicing our materially increased indebtedness will require a significant amount of cash, and we may not have sufficient cash flow from our business to pay such indebtedness.

•Additional securityholder lawsuits may delay or prevent the consummation of the merger and cause us and/or Silicon Motion to incur substantial defense or settlement costs, or otherwise adversely affect us or Silicon Motion.

•The fact that there is a merger pending could materially harm us or Silicon Motion and our results of operations.

•Counterparties of Silicon Motion may acquire certain rights which could negatively affect us following the merger.

•If the merger is consummated, the ownership percentage interests of our stockholders will be reduced.

•After completion of the merger, we will be exposed to additional risks associated with doing business in Taiwan.

•We expect to incur substantial expenses related to the merger of MaxLinear and Silicon Motion.

•The market value of our common stock could decline if large amounts of our common stock are sold post-merger.

Table of Contents

Risks Related to Our Business

•Intense and increasing competition could have a material adverse effect on our revenue growth and market share.

•Global economic conditions, including factors such as high inflation and recession, could adversely affect our revenues, margins, and operating results.

•We are subject to the cyclical nature of the semiconductor industry.

•Our business, financial condition and results of operations could be adversely affected by the political and economic conditions of the countries in which we conduct business and other factors related to our international operations.

•Increased tariffs or the imposition of other trade barriers could have a material adverse effect on our revenues and operating results.

•We will lose sales if we are unable to obtain or retain government authorization to export certain of our products or technology or if such authorizations are revoked, and we will be subject to legal and regulatory consequences for any noncompliance with applicable export laws.

•We are subject to risks associated with international geopolitical conflicts involving the U.S. and other governments. For example, as more entities are added to restricted export control lists, our need to seek authorizations from the U.S. government may impact our ability to do business.

•The loss of, or a significant reduction in orders from major customers could have a material adverse effect on our revenue and operating results.

•Average selling prices of our products could decrease rapidly, which could have a material adverse effect on our profit.

•If we fail to penetrate new applications and markets, our revenue, revenue growth rate, if any, and financial condition could be materially and adversely affected.

•Development delays and consolidation trends in our industry could adversely affect our future revenues and results.

•We may be unable to make the substantial R&D investments that are required to remain competitive.

•A significant variance in our operating results or rates of growth, if any, could lead to substantial volatility in our stock price. We may not sustain our current level of revenue and/or manage future growth effectively. The impact of excess inventory in the channel could continue to influence our customers’ expected demand for certain of our products.

•Unforeseen delays or expenses caused by undetected defects or bugs in our products could reduce the market acceptance of our new products, damage our reputation and adversely affect our operating costs.

•We must be able to attract, train and retain qualified personnel and senior management, or our business, financial conditions, results of operations and prospects could suffer.

•If we fail to timely develop and introduce new or enhanced products, our ability to attract and retain customers and compete could be harmed.

•We are subject to order and shipment uncertainties, and differences between our estimates of customer demand and product mix and our actual results could negatively affect our inventory levels, sales and operating results.

•We may have difficulty accurately predicting our future revenue and appropriately budgeting our expenses particularly as we seek to enter new markets where we may not have prior experience.

•Customers require us to undergo a lengthy and expensive qualification process which does not assure product sales.

•We incur significant expenditures to win business and customer product plan cancellations may adversely affect our results of operations.

•Our operating results may fluctuate significantly from factors that could adversely affect our business and stock price.

•A failure to maintain compliance with governmental regulations could have a material adverse effect on our business.

•We have been and may be subject to future information technology failures, including security breaches and cyber-attacks, that could disrupt our operations and adversely affect our business, operations, and financial results.

Risks Relating to Intellectual Property

•We have settled in the past intellectual property litigation, and are currently facing and may in the future face claims of intellectual property infringement, which could be time-consuming, costly to defend or settle and result in the loss of significant rights.

•If we are unable to protect our significant amount of intellectual property, our business could be adversely affected.

Risks Relating to Reliance on Third Parties

•Failure to manage our relationships with, or negative impacts from, third parties could adversely affect our ability to market and sell our products.

•Should any of our distributors cease or be forced to stop distributing our products, our business would suffer.

•A lack of long-term supply contracts, and any supply disruption could have a material adverse effect on our business.

•Any failure of third parties to provide services and technology could have a material adverse effect on our business.

Table of Contents

Risks Relating to Our Common Stock

•Our senior management team may use our available cash and cash equivalents in ways with which you may not agree or in ways which may not yield a return.

•Anti-takeover provisions in our charter and under Delaware law could make an acquisition of us more difficult.

•Our share price may be volatile as a result of various factors.

Risks Relating to our Proposed Merger with Silicon Motion

If the merger is completed, our actual financial and operating results could differ materially from any expectations or guidance provided by us concerning future results, including (without limitation) expectations or guidance with respect to the financial impact of any cost savings and other potential synergies.

Although we currently expect to realize material synergies as a result of our proposed merger with Silicon Motion, the expectations and guidance we have provided with respect to the potential financial impact of the merger are subject to numerous assumptions including assumptions derived from our diligence efforts concerning the status of and prospects for Silicon Motion’s business, which we do not currently control, and assumptions relating to the near-term prospects for the semiconductor industry generally and the markets for Silicon Motion’s products in particular. Additional assumptions we have made relate to numerous matters, including (without limitation) the following:

•projections of Silicon Motion’s future revenues;

•the anticipated financial performance of Silicon Motion’s products and products currently in development;

•anticipated cost savings and other synergies associated with the merger, including potential revenue synergies;

•our capital structure after the merger;

•the amount of goodwill and intangibles that will result from the merger;

•certain other purchase accounting adjustments that we expect to record in our financial statements in connection with the merger;

•merger costs, including restructuring charges and transaction costs payable to our financial, legal, and accounting advisors;

•our ability to maintain, develop, and deepen relationships with customers of Silicon Motion; and

•other financial and strategic risks of the merger, including the possible impact of our reduced liquidity resulting from deal-related cash outlays, the credit risk associated from the potential debt facility described below, and continued uncertainty arising from the global economic downturn.

We cannot provide any assurances with respect to the accuracy of our assumptions, including our assumptions with respect to future revenues or revenue growth rates, if any, of Silicon Motion, and we cannot provide assurances with respect to our ability to realize the cost savings that we currently anticipate. Risks and uncertainties that could potentially impact our future operating results and cause our actual results to differ materially from currently anticipated results include, but are not limited to, risks relating to our ability to integrate Silicon Motion successfully; currently unanticipated incremental costs that we may incur in connection with integrating the two companies; risks relating to our ability to realize incremental revenues from the merger in the amounts that we currently anticipate including a decline in Silicon Motion’s revenues as a result of a global economic downturn and its impacts on customer demand for their products; risks relating to the willingness of Silicon Motion’s customers and other partners to continue to conduct business with MaxLinear; risks related to changes in government regulations, including those related to export controls; and numerous risks and uncertainties that affect the semiconductor industry generally and the markets for our products and those of Silicon Motion specifically. Any failure to integrate Silicon Motion successfully and to realize the financial benefits we currently anticipate from the merger would have a material adverse impact on our future operating results and financial condition and could materially and adversely affect the trading price or trading volume of our common stock.

Table of Contents

Failure to integrate our business and operations successfully with those of Silicon Motion in the expected timeframe or otherwise may adversely affect our operating results and financial condition if the merger is completed.

The success of the proposed merger with Silicon Motion will depend, in substantial part, on our ability to integrate Silicon Motion’s business and operations successfully with those of MaxLinear and to realize fully the anticipated benefits and potential synergies from combining our companies, including, among others, currently expected cost savings from duplicative functions; potential operational efficiencies in our respective supply chains and in research and development investments; and potential revenue growth resulting from the addition of Silicon Motion’s product portfolio. Historically, we and Silicon Motion have been independent companies, and we will continue to operate as such until the consummation of the merger. We expect that the integration will be complex and time consuming and will require substantial management time and attention, which may divert attention and resources from other important areas, including our existing businesses. We may face significant challenges in consolidating our operations with Silicon Motion, integrating the two companies’ business processes, technologies, operations and addressing the different corporate cultures of the two companies. Additional unanticipated costs may be incurred in the course of integrating our respective businesses. If the companies are not successfully integrated, the anticipated benefits of the merger may not be realized fully or at all or may take longer to realize than expected and there could be increased compliance risks. In such a case, we would expect our operating results and financial condition to be materially and adversely affected, which could also have a material adverse effect on the trading price or trading volume of our common stock.

Our business relationships, including customer relationships, and those of Silicon Motion may be subject to disruption due to uncertainty associated with the merger.

Customers, vendors, licensors, and other third parties with whom we or Silicon Motion do business or otherwise have relationships may experience uncertainty associated with the merger, and this uncertainty could materially affect their decisions with respect to existing or future business relationships with MaxLinear or Silicon Motion while the merger is pending or with MaxLinear after the merger is consummated. As a result, we are in many instances unable to evaluate the impact of the merger on certain assumed contractual rights and obligations, including intellectual property rights.

These business relationships may be subject to disruption as customers and others may elect to delay or defer purchase or design-win decisions or switch to other suppliers due to the uncertainty about the direction of our offerings, any perceived unwillingness on our part to support existing Silicon Motion products after the merger is consummated, or any general perceptions by customers or other third parties that impute operational or business challenges to us arising from the merger. In addition, customers or other third parties may attempt to negotiate changes in existing business relationships, which may result in additional obligations imposed on us. These disruptions could have a material adverse effect on our business, operating results, and financial condition while the merger is pending or after it is consummated. The adverse effect of any such disruptions could be exacerbated by a delay in the consummation of the merger for any reason, including delays associated with obtaining antitrust approval from SAMR, or termination of the agreement and plan of merger, or the Merger Agreement, with Silicon Motion. Any loss of customers, customer products, design win opportunities, or other important strategic relationships could have a material adverse effect on our business, operating results, and financial condition and could have a material adverse effect on the trading price or trading volume of our common stock.

We and Silicon Motion may have difficulty motivating and retaining senior management and other key personnel in light of the pending merger.

Uncertainty about the effect of the merger on our employees and those of Silicon Motion may have a material adverse effect on MaxLinear or Silicon Motion while the merger is pending or on MaxLinear after the merger is consummated. This uncertainty may impair our or Silicon Motion’s ability to retain and motivate key personnel in the months leading up to the consummation of the merger and our ability to retain and motivate them following the merger. Employee retention may be particularly challenging as our and Silicon Motion’s employees may experience frustrations during the integration process and uncertainty about their future roles with us following consummation of the merger. For the merger to be successful, we and Silicon Motion must continue to retain and motivate senior management and other key employees during the period before the merger is completed. Furthermore, after the merger is consummated, we must be successful at retaining and motivating key employees in order for the benefits of the transaction to be fully realized. If key employees depart, we may incur significant costs in identifying, hiring, and retaining replacements, which could substantially reduce or delay our ability to realize the anticipated benefits of the merger, which could have a material adverse effect on our business, operating results, and financial condition.

Table of Contents

The merger agreement with Silicon Motion contains provisions that could require us to pay Silicon Motion a termination fee of $160 million under certain circumstances.

The consummation of the merger is subject to certain customary closing conditions such as antitrust approval from SAMR. Under certain circumstances, we could be required to pay Silicon Motion a termination fee if the Merger Agreement is terminated by MaxLinear or Silicon Motion as a result of a court or other competent authority issuing an order pursuant to regulatory law permanently prohibiting the consummation of the merger, or the merger is not consummated by May 5, 2023, or the current extended Outside Date. The Outside Date will be automatically extended to August 7, 2023, if all conditions to closing have been met, other than certain exceptions related to regulatory matters. However, in certain circumstances, the right to terminate the Merger Agreement would not be available to a party in material breach of the Merger Agreement.

If the proposed merger is not completed, we will have incurred substantial costs that may adversely affect our operating results and financial condition as well as the market price of our common stock.

If the merger is not consummated, the price of our common stock may decline to the extent that such market price reflects a market assumption that the merger will be completed. In addition, we have incurred and will incur substantial costs in connection with the proposed merger. These costs are primarily associated with the fees of our financial advisors, accountants, lenders, and legal counsel and, with limited exceptions relating to a portion of our financial advisor fees, will be payable regardless of whether the merger is completed. In addition, we have diverted significant management resources in an effort to complete the merger and are subject to restrictions contained in the Merger Agreement on the conduct of our business during the pendency of the merger. If the merger is not completed, we will have received little or no benefit in respect of such costs incurred. If the merger is not completed under certain circumstances specified in the Merger Agreement, we may be required to pay a termination fee to Silicon Motion of $160 million, as described above. Furthermore, if the merger is not consummated, we may experience negative reactions from the financial markets and our suppliers, customers, customer prospects, and employees. Any of these factors could have a material adverse effect on our business, operating results, and financial condition or on the trading price of our common stock.

Our ability to complete the merger is subject to various closing conditions, including certain required antitrust approval from SAMR, which may contain burdensome conditions that could have a material adverse effect on our operation of the business following the merger.

Although the statutory waiting period under the Hart-Scott-Rodino Antitrust Improvements Act of 1976, as amended, expired on June 27, 2022, and Silicon Motion’s shareholders approved the merger at Silicon Motion’s extraordinary general meeting of shareholders held on August 31, 2022, completion of the merger is subject to the satisfaction of the remaining customary closing conditions, including receipt of clearance from SAMR, among other things. Even if this approval is obtained, governmental authorities could impose conditions on the completion of the merger that could delay consummation of the acquisition or have a material adverse effect on our business following the acquisition. MaxLinear and Silicon Motion cannot predict with certainty the length of review by SAMR but expect a final determination in the second or third quarter of 2023, or even later.

If we are unable to complete the merger, we would be subject to a number of risks, including the following:

•we would not realize the anticipated benefits of the acquisition, including, among other things, increased operating efficiencies;

•the attention of our senior management team and other key personnel may have been diverted to the merger rather than to our own operations and the pursuit of other opportunities that could have been beneficial to us;

•the potential loss of key personnel during the pendency of the merger as employees and other service providers may experience uncertainty about their future roles with us following completion of the merger; and

•the trading price of our common stock may decline to the extent that the current market prices reflect a market assumption that the merger will be completed.

We can provide no assurance that the various closing conditions will be satisfied, that the necessary antitrust approval from SAMR will be obtained, or that any required conditions will not materially adversely affect our business following the merger. If we are required to undertake divestitures or to commit to certain behavioral remedies in order to obtain any approvals required to complete the acquisition, we may be less able to realize anticipated benefits of the acquisition, and our business, operating results, and financial condition after the merger may be adversely affected. In addition, we can provide no assurance

Table of Contents

that these conditions will not result in the abandonment or delay of the merger. The occurrence of any of these events individually or in combination could have a material adverse effect on our business, financial condition, and results of operations and on the trading price of our common stock.

In order to consummate the merger and distribute the cash consideration payable to Silicon Motion securityholders, we will incur material indebtedness of up to $3.5 billion and we may also use a portion of Silicon Motion’s and our cash resources, and we may decide to issue additional shares of our common stock to reduce our overall leverage ratio. This material increase in our indebtedness will adversely affect our operating results and cash-flows as we satisfy our underlying interest and principal payment obligations. Issuing additional shares of our common stock, if material, will result in dilution of existing shares outstanding. The loan agreement is also expected to contain financial and operational covenants that would adversely affect our operational freedom or ability to pursue strategic transactions that we would otherwise consider to be in the best interests of stockholders, including obtaining additional indebtedness to finance such transactions.

As previously disclosed, MaxLinear will finance the merger in part with the Senior Secured Credit Facilities, which will provide funding of up to $3.5 billion. We may also use a portion of Silicon Motion’s and our cash resources, and we may decide to issue additional shares of common stock to reduce our overall leverage ratio. A portion of the proceeds from the Senior Secured Credit Facilities will be used to repay existing debt in full. As of March 31, 2023, our aggregate indebtedness was $125.0 million.

The material increase in our indebtedness to up to $3.5 billion will adversely affect our interest payment obligations and will adversely affect our ability to use cash generated from operations as we repay interest and principal under the term loans and revolving credit facility, as applicable. Issuing additional shares of common stock, if material, will result in dilution of existing shares outstanding. In addition, the loan agreements will contain financial and operational covenants that may adversely affect our ability to engage in certain activities, including certain financing and acquisition transactions, stock repurchases, guarantees, and similar transactions, without obtaining the consent of the lenders, which may or may not be forthcoming. Such financial and operational covenants will include compliance with a secured net leverage ratio test. Accordingly, outstanding indebtedness could adversely affect our operational freedom or ability to pursue strategic transactions that we would otherwise consider to be in the best interests of stockholders.

Specifically, our materially increased indebtedness could have important consequences to investors in our common stock, including the following:

•we could be subject to substantial variable interest rate risk because our interest rate under term loans typically vary based on a fixed margin over an indexed rate or an adjusted base rate. While we are mitigating the impact of rising interest rates with large amounts of prepayments on our outstanding debt, if interest rates were to further increase substantially, particularly with respect to our anticipated debt associated with the Silicon Motion merger, it would have a material adverse effect our operating results and could affect our ability to service the indebtedness;

•our ability to obtain any necessary financing in the future for working capital, capital expenditures, debt service requirements, or other purposes may be limited or financing may be unavailable;

•a substantial portion of our cash flows must be dedicated to the payment of principal and interest on our indebtedness and other obligations and will not be available for use in our business;

•our level of indebtedness could limit our flexibility in planning for, or reacting to, changes in our business and the markets in which we operate; and

•our high degree of indebtedness will make us more vulnerable to changes in general economic conditions and/or a downturn in our business, thereby making it more difficult for us to satisfy our obligations.

If we fail to make required debt payments, or if we fail to comply with other covenants in our debt service agreements, we would be in default under the terms of these agreements. Subject to customary cure rights, any default would permit the holders of the indebtedness to accelerate repayment of this debt and could cause defaults under other indebtedness that we have, any of which could have a material adverse effect on the trading price of our common stock.

Table of Contents

Servicing our materially increased indebtedness will require a significant amount of cash, and we may not have sufficient cash flow from our business to pay our substantial indebtedness.

Under the Senior Secured Credit Facilities, we may incur up to $3.5 billion in aggregate principal amount of senior indebtedness. Our substantial indebtedness may increase our vulnerability to any generally adverse economic and industry conditions.

Our ability to make scheduled payments of the principal and interest when due, or to refinance our borrowings under the Senior Secured Credit Facilities, will depend on our future performance, which is subject to economic, financial, competitive and other factors beyond our control. Our business may not continue to generate cash flow from operations in the future sufficient to satisfy our obligations under our indebtedness, and any future indebtedness we may incur and to make necessary capital expenditures. If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as reducing or delaying investments or capital expenditures, selling assets, refinancing or obtaining additional equity capital on terms that may be onerous or highly dilutive. Our ability to refinance the term loans or existing or future indebtedness will depend on the capital markets and our financial condition at such time. We may not be able to engage in any of these activities or engage in these activities on desirable terms, which could result in a default on the Senior Secured Credit Facilities or future indebtedness.

MaxLinear stockholders or Silicon Motion securityholders could file additional lawsuits in the future challenging the merger, which may delay or prevent the consummation of the merger and cause us and/or Silicon Motion to incur substantial defense or settlement costs, or otherwise adversely affect us or Silicon Motion.

As of the date of this filing of our quarterly report on Form 10-Q, four lawsuits challenging the merger with Silicon Motion have been dismissed. However, Silicon Motion has received several shareholder demand letters, and potential plaintiffs may file additional lawsuits challenging the merger. The outcome of any current demand letters or future litigation is uncertain. Such litigation, if not resolved, could prevent or delay completion of the merger and result in substantial costs to us and/or Silicon Motion, including any costs associated with the indemnification of directors and officers. One of the conditions to the closing is the absence of any provision of applicable law or order by any court or governmental entity (subject to certain limited exceptions) that has the effect of restraining, enjoining or otherwise prohibiting the consummation of the merger. Therefore, if a plaintiff were successful in obtaining an injunction prohibiting the consummation of the merger on the agreed-upon terms, then such injunction may prevent the merger from being completed, or from being completed within the expected timeframe. The defense or settlement of any lawsuit or claim that remains unresolved at the time the merger is completed may adversely affect our or Silicon Motion’s business, financial conditions, results of operations and cash flows.

The fact that there is a merger pending could materially harm our or Silicon Motion’s businesses and results of operations.

While the merger is pending, we and Silicon Motion are subject to a number of risks that may harm our business and results of operations, including:

•the diversion of management and employee attention from implementing growth strategies in existing markets or in new markets we or Silicon Motion are targeting;

•potential diversion of public attention from positioning of our or Silicon Motion’s independent brand and products in a manner that appeals to customers;

•the fact that we and Silicon Motion have and will continue to incur expenses related to the merger prior to its closing;

•the potential inability to respond effectively to competitive pressures, industry developments and future opportunities, in particular, given the restrictions on the conduct of our or Silicon Motion’s business during the interim period between signing and closing due to the pre-closing covenants in the Merger Agreement;

•We or Silicon Motion could be subject to costly litigation associated with the merger; and

•current and prospective employees may be uncertain about their roles and relationships with us or Silicon Motion following completion of the merger, which may adversely affect the ability of us or Silicon Motion to attract and retain key personnel.

Table of Contents

Counterparties of Silicon Motion may acquire certain rights upon the merger, which could negatively affect us following the merger.

Silicon Motion is party to numerous contracts, agreements, licenses, permits, authorizations and other arrangements that contain provisions giving counterparties certain rights (including, in some cases, termination rights) in the event of an “assignment” of such agreement or a “change in control” of Silicon Motion or its subsidiaries. The definitions of “assignment” and “change in control” vary from contract to contract and, in some cases, the “assignment” or “change in control” provisions may be implicated by the merger. If an “assignment” or “change in control” occurs, a counterparty may be permitted to terminate its contract with Silicon Motion or to exercise other remedies thereunder.

Whether a counterparty would have cancellation rights or other rights in connection with the merger depends upon the language and governing law of its agreement with Silicon Motion. Whether a counterparty exercises any cancellation rights or other rights it has would depend on, among other factors, such counterparty’s views with respect to our financial strength and business reputation following the merger, prevailing market conditions and the business implications of exercising any such rights. We and Silicon Motion cannot presently predict the effects, if any, if the merger is deemed to constitute an assignment or change in control under certain of Silicon Motion’s contracts and other arrangements, including the extent to which cancellation rights or other rights would be exercised, if at all, or the effect on our financial condition, results of operations or cash flows following the merger, but such effect could be material.

If the merger with Silicon Motion is consummated, the issuance of shares of our common stock to Silicon Motion securityholders will reduce the ownership percentage interests of our stockholders.

At the completion of the proposed merger with Silicon Motion, we expect to issue shares of our common stock to former Silicon Motion securityholders entitled to receive consideration pursuant to the Merger Agreement. If the merger is consummated, we expect that our stockholders will own approximately 86% and that Silicon Motion stockholders will own approximately 14% of our outstanding capital stock following completion of the merger. The issuance of shares of our common stock to Silicon Motion securityholders in the acquisition and the assumption by us of Silicon Motion restricted stock units will cause a reduction in the relative percentage voting and economic interests of our current stockholders.

After completion of the merger, we will be exposed to additional risks associated with doing business in Taiwan because of tense regional geopolitical risk with China.

Following the merger, the revenue and operations of Silicon Motion will form a substantial portion of our revenue and operations, and since most of Silicon Motion’s business operations are in Taiwan and its principal executive offices are in Hong Kong, risks of conducting business in Taiwan and Hong Kong, as described in the section “Risks Related to Our Business” under the risk factor “We are also subject to risks associated with international geopolitical conflicts involving the U.S. and other governments such as China and Russia” will be further intensified. As the United States tightens export controls on China, Hong Kong and Taiwan are also affected and given Silicon Motion’s prevalence of operations in these regions, our potential regulatory compliance risks will increase.

Past and recent developments in relations between Taiwan and China have on occasion depressed the market prices of the securities of companies with significant business activities in Taiwan. We cannot assure you that any contentious situation between Taiwan and China will always resolve in maintaining the current status quo or remain peaceful. Relations between Taiwan and China, potential confrontations between the United States and China and other factors affecting military, political, social or economic conditions in Taiwan and Hong Kong could have a material adverse effect on our financial condition and results of operations, as well as the market price and the liquidity of our common stock.

We expect to incur substantial expenses related to the merger of MaxLinear and Silicon Motion.

We expect to incur substantial expenses in connection with the pending merger and subsequent integration of Silicon Motion’s business with MaxLinear. We expect operational integration to require substantial management attention. Numerous factors, many of which are beyond our control, could affect the total cost or the timing of expected merger and integration expenses. Moreover, many of the expenses that will be incurred are by their nature difficult to estimate accurately at the present time. These expenses could, particularly in the near term, reduce the savings that we expect to achieve from the elimination of duplicative expenses and the realization of economies of scale and cost savings related to the integration of Silicon Motion. These merger and integration expenses may result in MaxLinear’s taking significant charges against earnings.

Table of Contents

The market value of our common stock could decline if large amounts of our common stock are sold following the merger with Silicon Motion.

Following the merger with Silicon Motion, our stockholders and former securityholders of Silicon Motion will own interests in a company operating an expanded business with more assets and a different mix of liabilities. Our current stockholders (and the securityholders of Silicon Motion who will receive our common stock in connection with the merger) may not wish to continue to invest in us, or may wish to reduce their investment in us, in order to comply with institutional investing guidelines, to increase diversification or to track any rebalancing of stock indices in which our common stock and Silicon Motion ADS are or were included. If, following the merger, large amounts of our common stock are sold, the price of our common stock could decline.

We will record goodwill in connection with the Silicon Motion merger that could become impaired and adversely affect our future operating results.

The merger with Silicon Motion will be accounted for as a business combination using the acquisition method of accounting by MaxLinear in accordance with accounting principles generally accepted in the United States. Under the acquisition method of accounting, the assets and liabilities of Silicon Motion will be recorded, as of completion, at their respective fair values and added to our assets and liabilities. Our reported financial condition and results of operations after completion of the merger will reflect Silicon Motion’s balances and results but will not be restated retroactively to reflect the historical financial position or results of operations of Silicon Motion for periods prior to the merger. As a result, comparisons of future results against prior period results will be more difficult for investors.

Under the acquisition method of accounting, the total purchase price will be allocated to Silicon Motion’s tangible assets and liabilities and identifiable intangible assets based on their fair values as of the date of completion of the merger. The excess of the purchase price over those fair values will be recorded as goodwill. We expect that the merger will result in the creation of a material amount of intangible assets and goodwill based upon the application of the acquisition method of accounting. To the extent the value of goodwill or intangibles becomes impaired, we may be required to incur material charges relating to such impairment. Any such impairment charge could have a material impact on our operating results in future periods, and the announcement of a material impairment could have a material adverse effect on the trading price and trading volume of our common stock.

Risks Related to Our Business

We face intense competition and expect competition to increase in the future, which could have a material adverse effect on our revenue, revenue growth rate, if any, and market share.

The global semiconductor market in general, and the broadband, wired and wireless infrastructure, and broader industrial and communications analog and mixed-signal markets in particular, are highly competitive. We compete in different target markets to various degrees on the basis of a number of principal competitive factors, including our products’ performance, features and functionality, energy efficiency, size, ease of system design, customer support, product roadmap, reputation, reliability and price. We expect competition to increase and intensify as a result of industry consolidation and the resulting creation of larger semiconductor companies. Large semiconductor companies resulting from industry consolidation could enjoy substantial market power, which they could exert through, among other things, aggressive pricing that could adversely affect our customer relationships, revenues, margins and profitability. In addition, we expect the internal resources of large, integrated original equipment manufacturers, or OEMs, may continue to enter our markets. Increased competition could result in price pressure, reduced profitability and loss of market share, any of which could materially and adversely affect our business, revenue, revenue growth rates, if any, and operating results.

As our products are integrated into a variety of communications and industrial platforms, our competitors range from large, international merchant semiconductor companies offering a wide range of semiconductor products to smaller companies specializing in narrow markets, to internal or vertically integrated engineering groups within certain of our customers. Our primary merchant semiconductor competitors include Broadcom Inc., Qualcomm Incorporated, Realtek Semiconductor Corp., Nokia Corp., Skyworks Solutions, Inc., Xilinx, Inc., Altera Corporation, Credo Semiconductor Inc., MediaTek, Inc., Marvell Technology Group Ltd., MACOM Technology Solutions Holdings, Inc., Texas Instruments Incorporated, Analog Devices, Inc., Renesas Electronics Corporation, and Microchip Technology Inc. It is quite likely that competition in the markets in which we participate will increase in the future as existing competitors improve or expand their product offerings. In addition, a number of other public and private companies are in the process of developing competing products for our current and target markets. Because our products often are building block semiconductors which provide functions that in some cases can be integrated into

Table of Contents

more complex integrated circuits, we also face competition from manufacturers of integrated circuits, some of which may be existing customers or platform partners that develop their own integrated circuit products. If we cannot offer an attractive solution for applications where our competitors offer more fully integrated products, we may lose significant market share to our competitors. Some of our targeted customers for our optical interconnect solutions are module makers who are vertically integrated, where we compete with internally supplied components, and we compete with much larger analog and mixed-signal catalog competitors in the multi-market high-performance analog markets.

Our ability to compete successfully depends on factors both within and outside of our control, including industry and general economic trends. During past periods of downturns in our industry, competition in the markets in which we operate intensified as manufacturers of semiconductors reduced prices in order to combat production overcapacity and high inventory levels. Many of our competitors have substantially greater financial and other resources with which to withstand similar adverse economic or market conditions in the future. Moreover, the competitive landscape is changing as a result of intense consolidation within our industry as some of our competitors have merged with or been acquired by other competitors, and other competitors have begun to collaborate with each other, which could result in significant changes to the competitive landscape. In addition, changes in government trade policies, including the imposition of tariffs and export restrictions, could limit our ability to sell our products to certain customers and adversely affect our ability to compete successfully. These developments may materially and adversely affect our current and future target markets and our ability to compete successfully in those markets.

Global economic conditions, including factors such as high inflation or a recession could adversely affect our business, financial condition, and results of operations.

Inflation and uncertainty in customer demand and the worldwide economy has continued, and we have experienced and may experience continued volatility in our sales and revenues in the near future. Our products are incorporated in numerous consumer devices, and demand for such products will ultimately be driven by consumer demand for products such as televisions, personal computers, automobiles, cable modems, and set-top boxes. Many of these purchases are discretionary. Global economic volatility and economic volatility in the specific markets in which the devices that incorporate our products are ultimately sold, including the impacts of current high rates of inflation and recession, can cause extreme difficulties for our customers and third-party vendors in accurately forecasting and planning future business activities. For example, on March 10, 2023, Silicon Valley Bank, or SVB was placed into receivership with the Federal Deposit Insurance Corporation, or FDIC, which resulted in all funds held at SVB being temporarily inaccessible by SVB’s customers. If banks and financial institutions with whom we have banking relationships enter receivership or become insolvent in the future, we may be unable to access, and we may lose, some or all of our existing cash, cash equivalents and investments to the extent those funds are not insured or otherwise protected by the FDIC. In addition, a government shutdown or the U.S. government’s failure to raise the debt ceiling, which increases the possibility of a default by the U.S. government on its debt obligations, or related credit-rating downgrades could have adverse effects on the broader global economy and contribute to, or worsen, an economic recession. This unpredictability could cause our customers to delay or reduce their capital expenditures and spending on our products, which would delay and lengthen sales cycles and negatively affect the overall demand for our products. Worsening economic instability could result in a cancellation of such orders or otherwise adversely affect spending for information technology and limit our ability to forecast future demand for our products, which could reduce expected revenues or result in a write-down of any excess or obsolete inventory. Furthermore, during challenging economic times, our customers may face challenges in gaining timely access to sufficient credit, which could impact their ability to make timely payments to us. These events, together with economic volatility that may face the broader economy and, in particular, the semiconductor and communications industries, may adversely affect, our business, particularly to the extent that consumers decrease their discretionary spending for devices deploying our products. However, the magnitude of such volatility on our business and its duration is uncertain and cannot be reasonably estimated at this time.

Other areas of our business which could be disrupted or subject to negative impacts of negative global economic conditions may include, but may not be limited to, the following:

•Reduced ability to accurately predict our future revenue and budget future expenses;

•Inefficiencies, delays and additional costs in design win, product development, production and fulfillment;

•Accounts receivable collection issues should any of our limited and significant customers experience liquidity concerns;

•Material impacts to the value of our common stock, which may result in impairment of our goodwill;

Table of Contents

•Material impairment of our assets, if recoverability thereof becomes a concern; and

•Decreased availability of capital or access thereto in the United States and from other jurisdictions in which we operate.

We are subject to the cyclical nature of the semiconductor industry.

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving standards, short product life cycles and wide fluctuations in product supply and demand. The current downturn, or any future downturns, may result in diminished product demand, production overcapacity, high inventory levels and accelerated erosion of our average selling prices. Furthermore, any future upturn in the semiconductor industry could result in increased competition for access to third-party foundry and assembly capacity. We are dependent on the availability of this capacity to manufacture and assemble all of our products. None of our third-party foundry or assembly contractors has provided assurances that adequate capacity will be available to us in the future. A significant downturn or upturn could have a material adverse effect on our business and operating results.

Our business, financial condition and results of operations could be adversely affected by the political and economic conditions of the countries in which we conduct business and other factors related to our international operations.

We sell our products throughout the world. Products shipped to Asia accounted for 77% of our net revenue in the three months ended March 31, 2023. In addition, as of March 31, 2023, approximately 79% of our employees are located outside of the United States. The majority of our products are manufactured, assembled and tested in Asia, and our major distributors are located in Asia. Multiple factors relating to our international operations and to particular countries in which we operate could have a material adverse effect on our business, financial condition and results of operations. These factors include:

•changes in political, regulatory, legal or economic conditions;

•restrictive governmental actions, such as restrictions on the transfer or repatriation of funds and foreign investments and trade protection measures, including export controls and restrictions, duties and quotas and customs duties and tariffs;

•disruptions of capital and trading markets;

•changes in import or export licensing requirements;

•transportation delays;

•civil disturbances or political instability;

•geopolitical turmoil, including terrorism, war or political or military coups;

•public health emergencies, such as an outbreak of COVID-19;

•differing employment practices and labor standards;

•limitations on our ability under local laws to protect our intellectual property;

•local business and cultural factors that differ from our customary standards and practices;

•nationalization and expropriation;

•changes in tax laws;

•currency fluctuations relating to our international operating activities; and

•difficulty in obtaining distribution and support.

In addition to a significant portion of our wafer supply coming from Taiwan, Singapore, and China, substantially all of our products undergo packaging and final testing in Taiwan, Singapore, China, South Korea, and Thailand. Any conflict or uncertainty in these countries, including due to natural disaster, public health or safety concerns, could have a material adverse effect on our business, financial condition and results of operations. In addition, if the government of any country in which our products are manufactured or sold sets technical standards for products manufactured in or imported into their country that are

Table of Contents

not widely shared, it may lead some of our customers to suspend imports of their products into that country, require manufacturers in that country to manufacture products with different technical standards and disrupt cross-border manufacturing relationships which, in each case, could have a material adverse effect on our business, financial condition and results of operations.

Changes in trade policies among the United States and other countries, in particular the imposition of new or higher tariffs, could place pressure on our average selling prices as our customers seek to offset the impact of increased tariffs on their own products. Increased tariffs or the imposition of other barriers to international trade could have a material adverse effect on our revenues and operating results.

The United States has imposed or proposed new or higher tariffs on certain products exported by a number of U.S. trading partners, including China, Europe, Canada, and Mexico. In response, many of those trading partners, including China, have imposed or proposed new or higher tariffs on American products. Continuing changes in government trade policies create a heightened risk of further increased tariffs that impose barriers to international trade. Our business and operating results are substantially dependent on international trade. Many of our manufacturers sell products incorporating our integrated circuits into international markets.

Tariffs on our customers’ products may adversely affect our gross profit margins in the future due to the potential for increased pressure on our selling prices by customers seeking to offset the impact of tariffs on their own products. In addition, tariffs could make our OEM and ODM customers’ products less attractive relative to products offered by their competitors, which may not be subject to similar tariffs. Some OEM and ODMs in our industry have already implemented short-term price adjustments to offset such tariffs and transitioned their production and supply chain to locations outside of China. We believe that increases in tariffs on imported goods or the failure to resolve current international trade disputes could have a material adverse effect on our business and operating results.

We will lose sales if we are unable to obtain or retain government authorization to export certain of our products or technology related to the development or production of our products or if such authorizations are revoked, and we will be subject to legal and regulatory consequences if we do not comply with applicable export control laws and regulations.

Certain of our products and technologies are subject to export and/or import controls imposed by countries in which we do business. In certain instances, these regulations may require pre-shipment authorization approval from a government authority; depending on the country and/or individual or entity involved, approval may not be granted. For products subject to the Export Administration Regulations, or EAR, administered by the U.S. Department of Commerce’s Bureau of Industry and Security, or BIS, a license may be required, depending on one or more factors including the type of product or technology at issue, the intended end use, the identity of the end user, the identity of other companies involved in the production process, and whether a license exception might apply. Certain of our products and technologies are subject to the EAR.

Obtaining export licenses can be difficult, costly and time-consuming and we may not always be successful in obtaining necessary export licenses. Our failure to obtain required import or export approval for our products may adversely affect our business, and other limitations imposed on our ability to export or sell our products may also harm our international and domestic revenue. In addition, it is possible that BIS can revoke licenses that have been granted or decline to re-issue such licenses upon their expiration. Although our policies, controls, and procedures are designed to maintain ongoing compliance with applicable export controls laws, we cannot assure you that we have been or will be at all times in complete compliance with such laws and regulations. For example, our products could be diverted to bad actors. If we violate or fail to comply with any of them, a range of consequences could result, including fines, import/export restrictions, sales limitations, criminal and civil liabilities or other sanctions. In addition, if our customers fail to comply with these regulations and laws, we may be required to suspend sales to these customers, which could damage our reputation and negatively impact our results of operations. The absence of comparable restrictions imposed on competitors based in other countries may adversely affect our competitive position.

To the extent that we do business with parties on the Entity List under export licenses, our business could be affected if the government does not grant or renew required licenses. We currently have a license from BIS that permit our transactions with a restricted party, but that license may be revoked at any time or denied for renewal when the license expires.

In October 2022, the BIS issued an interim final rule to implement (1) additional export controls on advanced computing integrated circuits (ICs), computer commodities that contain such ICs and certain semiconductor manufacturing items; (2) additional export control requirements for products and/or technologies that may be destined for facilities meeting certain criteria; and (3) additional export controls on transactions involving items for supercomputer and semiconductor manufacturing

Table of Contents

end uses. The additional export controls on certain manufacturing end-uses resulted in an expansion of the scope of foreign-produced items subject to license requirements for 28 Chinese entities already on the Entity List (a list of entities to which the transfer of EAR-controlled technology or software is generally prohibited absent a U.S. export license), which includes one immaterial customer of MaxLinear located in China.

Export control laws, regulations, and orders are complex, change frequently and with limited or no notice, have generally become more stringent over time and have intensified as U.S.-China geopolitical tensions worsen. The addition of new entities to restricted party lists can further increase the scope of export restrictions applicable to our business. Failure to obtain required export licenses for our products or the placement of one or more of our customers on any restricted parties lists could significantly reduce our revenue and harm our business.

Additionally, current and future business with parties subject to significant export restrictions, including those named on the Entity List may be limited in scope or suspended entirely in order to comply with the EAR or other applicable laws or regulations and, as a result, our revenue could be adversely impacted until a license is granted or renewed. It is possible that the U.S. government may not grant licenses or renew licenses to transact business with entities on the Entity List.

In September 2022, we self-identified a potential violation of the EAR related to certain transactions with one of our foundry partners in China on the Entity List, or Specific Foundry Partner, in which limited technology in the form of test results and failure analysis reports were furnished to our Specific Foundry Partner without authorization under the EAR. Upon discovery, (1) we took immediate action to remediate, including by preventing recurrence and (2) our Audit Committee engaged outside counsel to conduct a privileged investigation. This investigation has been completed. On March 3, 2023, we submitted a comprehensive voluntary self-disclosure to BIS regarding the potential EAR violation described above and other potential export control violations for which we have taken actions to remediate the infractions. Our voluntary self-disclosure is currently under review at BIS, and it is unknown when such review will be completed.

We also are subject to risks associated with international geopolitical conflicts involving the U.S. and other governments such as China and Russia.

In recent years, diplomatic and trade relationships between the U.S. government and China have been frayed. Events in Hong Kong and the threat of a takeover of Taiwan by China have also prompted other governments such as that of the United Kingdom to reconsider its trade and business relationships with China and with certain Chinese companies. Difficulties in these relationships have in a number of cases required us to take actions adverse to our business to comply with governmental restrictions on business and trade with China.

Beginning in May 2019 and subsequently, other than for certain transactions for which we have a valid export license issued by BIS, we ceased business operations with entities affiliated with Huawei Technologies Co., Ltd., or Huawei and certain other entities, following an amendment to the EAR adding such entities to the Entity List for acting contrary to the national security or foreign policy interests of the United States. As noted above, the export license that is currently issued can be revoked or BIS could choose not to renew this license, which would halt the currently-approved licensed activities.

In September 2020, we further restricted business operations with additional entities affiliated with Huawei when the BIS again amended the EAR to add such entities to the Entity List.

The BIS has been adding many new entities to the Entity List and Unverified List. It is possible that entities currently on the Unverified List may be added to the Entity List if certain conditions are not met. As noted above, our ability to sell or distribute products or technology will be limited if BIS further amends the EAR to add restrictions against parties who are or may be our customers. This also raises an additional risk that China may enact retaliatory legislation or regulations that may raise similar adverse risks.

We are required to obtain special licenses to conduct business with entities on the Entity List and to conduct additional diligence and recordkeeping, including obtaining user statements from entities on the Unverified List. Failure to obtain any required license would likely result in a loss of business and a corresponding negative impact on our financial position and results of operations.

We believe direct impacts of the economic sanctions against Russia and the military conflict in Ukraine are currently limited to volatility in the prices of metals used by our outsourced semiconductor assembly and test, or OSAT, supply chain, in particular around the supply of palladium, for which Russia is the top producer in the world, as well as increased fuel costs, which has global impact on transportation costs, including the shipping and delivery of our products. However, the magnitude

Table of Contents

of such price volatility on our business and its duration is uncertain and cannot be reasonably estimated at this time. The Company does not currently sell product in Russia, or sell product to distributors for resale in Russia.

We cannot provide assurances that similar disruptions of distribution arrangements in the future, the imposition of governmental prohibitions on selling our products to particular customers, further sanctions on Russia or other countries, and/or increases in costs of certain raw materials and transportation will not also adversely affect our revenues and operating results. Loss of a key distributor or customer under similar circumstances could have a material adverse effect on our business, revenues and operating results.

We depend on a limited number of customers for a substantial portion of our revenue, and the loss of, or a significant reduction in orders from one or more of our major customers could have a material adverse effect on our revenue and operating results.

In the three months ended March 31, 2023, one customer accounted for 15% of our net revenue, and our ten largest customers collectively accounted for 62% of our net revenue, of which distributor customers accounted for 16% of our net revenue. We expect that our operating results for the foreseeable future will continue to show a substantial percentage of sales dependent on a relatively small number of customers. In the future, these customers may decide not to purchase our products at all, may purchase fewer products than they did in the past, or may defer or cancel purchases or otherwise alter their purchasing patterns. Factors that could affect our revenue from these large customers include the following:

•substantially all of our sales to date have been made on a purchase order basis, which permits our customers to cancel, change or delay product purchase commitments with little or no notice to us and without penalty;

•some of our customers have sought or are seeking relationships with current or potential competitors which may affect their purchasing decisions;

•service provider and OEM consolidation across cable, satellite, and fiber markets could result in significant changes to our customers’ technology development and deployment priorities and roadmaps, which could affect our ability to forecast demand accurately and could lead to increased volatility in our business; and

•technological changes in our markets could lead to substantial volatility in our revenues based on product transitions, and particularly in our broadband markets, we face risks based on changes in the way consumers are accessing and using broadband and cable services, which could affect operator demand for our products.

In addition, delays in development could impair our relationships with our strategic customers and negatively impact sales of the products under development. Moreover, it is possible that our customers may develop their own products or adopt a competitor’s solution for products that they currently buy from us. If that happens, our sales would decline and our business, financial condition and results of operations could be materially and adversely affected.

Our relationships with some customers may deter other potential customers who compete with these customers from buying our products. To attract new customers or retain existing customers, we sometimes offer customers favorable prices on our products which results in a decline in our average selling prices and, if material, a decline in our gross margins. The loss of a key customer, a reduction in sales to any key customer or our inability to attract new significant customers could seriously impact our revenue and materially and adversely affect our results of operations.

A significant portion of our revenues are from sales of product to distributors, who then resell our product. Our agreements with certain of these distributors provide protection against price reduction on their inventories of our products. The loss of certain distributors could have a material adverse effect on our business and results of operations, and price reductions associated with their inventories of our products could have a material adverse effect on our operating results in the event of a dramatic decline in selling prices for these products.

In addition, the current situation relating to trade with China and governmental and regulatory concerns relating to specific Chinese companies continue to remain fluid and unpredictable. Our current and future operating results could be materially and adversely affected by limitations on our ability to sell to one or more Chinese customers, as described in the section “Risks Related to Our Business” under the risk factor “We are also subject to risks associated with international geopolitical conflicts involving the U.S. and other governments such as China and Russia”, and by tariffs and other trade barriers that may be implemented by governmental authorities.

Table of Contents

Despite a relatively short-term positive pricing environment, average selling prices of our products could decrease rapidly, which would have a material adverse effect on our revenue and gross margins.

We may experience substantial period-to-period fluctuations in future operating results due to the erosion of our average selling prices. From time to time, we have reduced the average unit price of our products due to competitive pricing pressures, new product introductions by us or our competitors, and for other reasons, and we expect that we will have to do so again in the future, despite a relatively short-term positive pricing environment. In particular, we believe that industry consolidation has provided a number of larger semiconductor companies with substantial market power, which has had a material adverse impact on selling prices in some of our markets. If we are unable to offset any reductions in our average selling prices by increasing our sales volumes or introducing new products with higher margins, our revenue and gross margins will suffer. To support our gross margins, we must develop and introduce new products and product enhancements on a timely basis and continually reduce our and our customers’ costs. Our inability to do so would cause our revenue and gross margins to decline. In addition, under certain of our agreements with key distributors, we provide protection for reductions in selling prices of the distributors’ inventory, which could have a material adverse effect on our operating results if the selling prices for those products fell dramatically.

If we fail to penetrate new applications and markets, our revenue, revenue growth rate, if any, and financial condition could be materially and adversely affected.

We sell a significant portion of our products to manufacturers of cable broadband voice and data modems and gateways, Pay-TV set-top boxes and gateways into cable and satellite operator markets, satellite outdoor units or LNB’s, optical modules for long-haul and metro telecommunications markets, and RF transceivers and modem solutions for wireless infrastructure markets. Our product offerings also include broadband data access, power management and interface technologies which are ubiquitous functions in new and existing markets such as wireless and wireline communications infrastructure, broadband access, industrial, enterprise network, and automotive applications. We have further expanded our product offerings to include Wi-Fi, ethernet and broadband gateway processor systems-on-chip, or SoCs, and intellectual property that utilizes patented machine learning techniques to improve signal integrity and power efficiency in SoCs, ASICs, and field-programmable gate arrays, or FPGAs, used in next-generation communication and artificial intelligence systems. Our future revenue growth, if any, will depend in part on our ability to further penetrate into, and expand beyond, these markets with analog, digital and mixed-signal solutions targeting the markets for Wi-Fi and broadband, high-speed optical interconnects for data center, metro, and long-haul optical modules, telecommunications wireless infrastructure, and cable DOCSIS 3.1 network infrastructure products. Each of these markets presents distinct and substantial risks. If any of these markets do not develop as we currently anticipate, or if we are unable to penetrate them successfully, it could materially and adversely affect our revenue and revenue growth rate, if any.

Broadband data modems and gateways and Pay-TV and satellite set-top boxes and video gateways continue to represent a significant North American and European revenue generator. The North American and European Pay-TV market is dominated by only a few OEMs, including Technicolor SA, Commscope Holding Company, Inc., Hitron Technologies, Inc., Compal Broadband Networks Inc., Humax Co., Ltd., and Samsung Electronics Co., Ltd. These OEMs are large multinational corporations with substantial negotiating power relative to us and are undergoing significant consolidation. Securing design wins with any of these companies requires a substantial investment of our time and resources. Even if we succeed, additional testing and operational certifications will be required by the OEMs’ customers, which include large Pay-TV television companies such as Comcast Corporation, Liberty Global plc, Charter Communications, Inc., Sky UK Limited, AT&T Inc. and EchoStar Corporation. In addition, our products will need to be compatible with other components in our customers’ designs, including components produced by our competitors or potential competitors. There can be no assurance that these other companies will support or continue to support our products.

If we fail to penetrate these or other new markets upon which we target our resources, our revenue and revenue growth rate, if any, likely will decrease over time and our financial condition could suffer.

Table of Contents

A significant portion of our revenue is attributable to demand for our products in markets for broadband solutions, and development delays and consolidation trends among cable and satellite Pay-TV and broadband operators could adversely affect our future revenues and operating results.

For the three months ended March 31, 2023 and 2022, revenue directly attributable to broadband applications accounted for approximately 33% and 51% of our net revenue, respectively. Delays in the development of, or unexpected developments in, the broadband markets could have an adverse effect on order activity by original equipment manufacturers in these markets and, as a result, on our business, revenue, operating results and financial condition. In addition, consolidation trends among Pay-TV and broadband operators may continue, which could delay or lead to cancellations of major spending programs and have a material adverse effect on our future operating results and financial condition.

We may be unable to make the substantial and productive research and development investments that are required to remain competitive in our business.

The semiconductor industry requires substantial investment in research and development in order to develop and bring to market new and enhanced technologies and products. Many of our products originated with our research and development efforts, which we believe have provided us with a significant competitive advantage. For three months ended March 31, 2023 and 2022, our research and development expense was $67.3 million and $65.9 million, respectively. We expect our research and development expenses to increase in future years when we expand our product portfolio and enhance existing products. We monitor such expenditures as part of our strategy of devoting focused research and development efforts on the development of innovative and sustainable product platforms. We are committed to investing in new product development internally in order to stay competitive in our markets and plan to maintain research and development and design capabilities for new solutions in advanced semiconductor process nodes such as 16nm and 5nm and beyond. However, we do not know whether we will have sufficient resources to maintain the level of investment in research and development required to remain competitive as semiconductor process nodes continue to shrink and become increasingly complex. In addition, we cannot assure you that the technologies that are the focus of our research and development expenditures will become commercially successful.

A significant variance in our operating results or rates of growth, if any, could lead to substantial volatility in our stock price. We may not sustain our current level of revenue and/or manage future growth effectively. The impact of excess inventory in the channel could continue to influence our customers’ expected demand for certain of our products.

Our net revenue decreased from $263.9 million in the three months ended March 31, 2022 to $248.4 million in the three months ended March 31, 2023. Prior to 2023, our net revenues grew to $1.1 billion for the year ended December 31, 2022. Continued uncertainty in customer demand as well as the global economy could continue to result in increased volatility in our sales and revenues, and we may not sustain our current level of revenue. Further, the impact of excess inventory in the channel could continue to influence our customers’ expected demand for certain of our products. You should not rely on our operating results for any prior quarterly or annual periods as an indication of our future operating performance. Please refer to the Risk Factor entitled “Our operating results are subject to substantial quarterly and annual fluctuations and may fluctuate significantly due to a number of factors that could adversely affect our business and our stock price” for a discussion of factors contributing to variances in our operating results or rates of growth, if any. If we are unable to resume adequate revenue growth, our financial results could suffer and our stock price could decline.

To manage any future growth successfully, we believe we must effectively, among other things:

•successfully develop new products and penetrate new applications and markets;

•recruit, hire, train and manage additional qualified engineers for our research and development activities, especially in the positions of design engineering, product and test engineering and applications engineering;

•add sales personnel and expand customer engineering support offices;

•implement and improve our administrative, financial and operational systems, procedures and controls; and

•enhance our information technology support for enterprise resource planning and design engineering by adapting and expanding our systems and tool capabilities, and properly training new hires as to their use.

If we are unable to resume and manage our growth effectively, we may not be able to take advantage of market opportunities or develop new products and we may fail to satisfy customer requirements, maintain product quality, execute our business plan, or respond to competitive pressures.

Table of Contents

The complexity of our products could result in unforeseen delays or expenses caused by undetected defects or bugs, which could reduce the market acceptance of our new products, damage our reputation with current or prospective customers and adversely affect our operating costs.

Highly complex products like our Wi-Fi and broadband RF receivers and RF receiver SoCs, physical medium devices for optical modules, RF transceiver and modem solutions for wireless infrastructure markets, and high-performance analog solutions may contain defects and bugs when they are first introduced or as new versions are released. Where any of our products, including legacy acquired products, contain defects or bugs, or have reliability, quality or compatibility problems, we may not be able to successfully correct these problems. Consequently, our reputation may be damaged and customers may be reluctant to buy our products, which could materially and adversely affect our ability to retain existing customers and attract new customers, and our financial results. In addition, these defects or bugs could interrupt or delay sales to our customers. If any of these problems are not found until after we have commenced commercial production of a new product, we may be required to incur additional development costs and product recall, repair or replacement costs, and our operating costs could be adversely affected. These problems may also result in warranty or product liability claims against us by our customers or others that may require us to make significant expenditures to defend these claims or pay damage awards. In the event of a warranty claim, we may also incur costs if we compensate the affected customer. We maintain product liability insurance, but this insurance is limited in amount and subject to significant deductibles. There is no guarantee that our insurance will be available or adequate to protect against all claims. We also may incur costs and expenses relating to a recall of one of our customers’ products containing one of our devices. The process of identifying a recalled product in devices that have been widely distributed may be lengthy and require significant resources, and we may incur significant replacement costs, contract damage claims from our customers and reputational harm. Costs or payments made in connection with warranty and product liability claims and product recalls could materially affect our financial condition and results of operations, and ability to obtain future coverage. Although we purchase insurance to mitigate certain losses, any uninsured losses could negatively affect our operating results. Although we maintain reserves for reasonably estimable liabilities and purchase product liability insurance, if a catastrophic product liability claim were to occur, our reserves may be inadequate to cover the uninsured portion of such claims. Further, our business liability insurance may be inadequate, may not cover the claims, and future coverage may be unavailable on acceptable terms, which could adversely impact our financial results.

If we are unable to attract, train and retain qualified personnel and senior management, our business, financial condition, results of operations and prospects could suffer.

Our future success depends on our ability to retain, attract and motivate qualified personnel, including our management, sales and marketing and finance teams, and especially our design and technical staff. We do not know whether we will be able to attract and retain the required and desirable personnel as we continue to pursue our business strategy. Historically, we have encountered difficulties in hiring and retaining qualified engineers because there is a limited pool of engineers with the expertise required in our field. Competition for these personnel is intense in the semiconductor industry. As the source of our technological and product innovations, our design and technical personnel represent a significant asset. In addition, in making employment decisions, particularly in the high-technology industry, job candidates often consider the value of the stock-based compensation they are to receive in connection with their employment. We have recently experienced fluctuations, including declines, in the market price of our stock, and a reduction in force which could adversely affect our ability to attract, motivate or retain key employees. In addition, our future performance also depends on the continued services and continuing contributions of our senior management to execute our business plan and to identify and pursue new opportunities and product innovations. Our employment arrangements with our employees do not generally require that they continue to work for us for any specified period, and therefore, they could terminate their employment with us at any time. The loss of the services of one or more of our key employees, especially our management and key design and technical personnel, or our inability to retain, attract and motivate qualified design and technical and other personnel, could have a material adverse effect on our business, financial condition and results of operations.

Our future success also depends on the continued contributions of our senior management team and other key personnel. None of our senior management team or other key personnel is bound by written employment contracts to remain with us for a specified period. In addition, we have not entered into non-compete agreements with members of our senior management team or other key personnel, except in limited circumstances (e.g., in connection with the acquisition of other companies). We are fortunate that many members of our senior management team have long tenures with us, but from time to time we also have been required to recruit new members of senior management. With respect to recruitment and retention of senior management, we need to ensure that our compensation programs provide sufficient recruitment and retention incentives as well as incentives to achieve our long-term strategic business and financial objectives. We expect competition for individuals with our required skill sets, particularly technical and engineering skills, to remain intense even in weak global macroeconomic environments.

Table of Contents

The loss of any member of our senior management team or other key personnel could harm our ability to implement our business strategy and respond to the rapidly changing market conditions in which we operate.

If we fail to develop and introduce new or enhanced products on a timely basis, our ability to attract and retain customers could be impaired and our competitive position could be harmed.

We operate in a dynamic environment characterized by rapidly changing technologies and industry standards and technological obsolescence. To compete successfully, we must design, develop, market and sell new or enhanced products that provide increasingly higher levels of performance and reliability and meet the cost expectations of our customers. The introduction of new products by our competitors, the market acceptance of products based on new or alternative technologies, or the emergence of new industry standards could render our existing or future products obsolete. Our failure to anticipate or timely develop new or enhanced products or technologies in response to technological shifts could result in decreased revenue and our competitors winning more competitive bid processes, known as “design wins.” In particular, we may experience difficulties with product design, manufacturing, marketing or certification that could delay or prevent our development, introduction or marketing of new or enhanced products. If we fail to introduce new or enhanced products that meet the needs of our customers or penetrate new markets in a timely fashion, we will lose market share and our operating results will be adversely affected.

In particular, we believe that we will need to develop new products in part to respond to changing dynamics and trends in our end user markets, including (among other trends) consolidation among cable and satellite operators, potential industry shifts away from the hardware devices and other technologies that incorporate certain of our products, and changes in consumer television viewing habits and how consumers access and receive broadcast content and digital broadband services. We cannot predict how these trends will continue to develop or how or to what extent they may affect our future revenues and operating results. We believe that we will need to continue to make substantial investments in research and development in an attempt to ensure a product roadmap that anticipates these types of changes; however, we cannot provide any assurances that we will accurately predict the direction in which our markets will evolve or that we will be able to develop, market, or sell new products that respond to such changes successfully or in a timely manner, if at all.

We are subject to order and shipment uncertainties, and differences between our estimates of customer demand and product mix and our actual results which has negatively affected our inventory levels, sales and operating results.

Our revenue is generated on the basis of shipments of products under purchase orders with our customers rather than long-term purchase commitments. In addition, our customers can cancel purchase orders or defer the shipments of our products under certain circumstances. Our products are manufactured using a silicon foundry according to our estimates of customer demand, which requires us to make separate demand forecast assumptions for every customer, each of which may introduce significant variability into our aggregate estimate. We have limited visibility into future customer demand and the product mix that our customers will require, which has in the past affected and could in the future adversely affect our revenue forecasts and operating margins. Moreover, because our target markets are relatively new, many of our customers have difficulty accurately forecasting their product requirements and estimating the timing of their new product introductions, which ultimately affects their demand for our products. Historically, because of this limited visibility, actual results have been different from our forecasts of customer demand. Some of these differences have been material which has led to and could continue to lead to excess inventory or product shortages and revenue and margin forecasts above those we were actually able to achieve. These differences may occur in the future, and the adverse impact of these differences between forecasts and actual results could grow if we are successful in selling in and expanding the customer base for our products. In addition, the rapid pace of innovation in our industry could render significant portions of our inventory obsolete. Excess or obsolete inventory levels could result in unexpected expenses or increases in our reserves that could adversely affect our business, operating results and financial condition. Conversely, if we were to underestimate customer demand or if sufficient manufacturing capacity were unavailable, we could forego revenue opportunities, potentially lose market share and damage our customer relationships. In addition, any significant future cancellations or deferrals of product orders or the return of previously sold products due to manufacturing defects could materially and adversely impact our profit margins, increase our write-offs due to product obsolescence and restrict our ability to fund our operations.

We may have difficulty accurately predicting our future revenue and appropriately budgeting our expenses particularly as we seek to enter new markets where we may not have prior experience.

Our operating history had historically focused on developing integrated circuits for specific applications and more recently, the wired whole-home broadband connectivity market and markets for wireless telecommunications infrastructure and power management and interface technologies which are ubiquitous functions in wireless and wireline communications

Table of Contents

infrastructure, broadband access, industrial, enterprise network, and automotive applications. As part of our growth strategy, we seek to expand our addressable market into new product categories. For example, we expanded into the markets for Wi-Fi, Ethernet and Broadband Gateway Processor SoCs and intellectual property that utilizes patented machine learning techniques to improve signal integrity and power efficiency in SoCs, ASICs, and FPGAs used in next-generation communication and artificial intelligence systems. Our limited operating experience in new markets or potential markets we may enter, combined with the rapidly evolving nature of our markets in general, substantial uncertainty concerning how these markets may develop and other factors beyond our control reduces our ability to accurately forecast quarterly or annual revenue. If our revenue does not increase as anticipated, we could incur significant losses due to our higher expense levels if we are not able to decrease our expenses in a timely manner to offset any shortfall in future revenue.

Our customers require our products and our third-party contractors to undergo a lengthy and expensive qualification process which does not assure product sales.

Prior to purchasing our products, our customers require that both our products and our third-party contractors undergo extensive qualification processes, which involve testing of the products in the customer’s system and rigorous reliability testing. This qualification process may continue for six months or more. However, qualification of a product by a customer does not assure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision to our solutions, or changes in our customer’s manufacturing process or our selection of a new supplier may require a new qualification process, which may result in delays and in us holding excess or obsolete inventory. After our products are qualified, it can take six months or more before the customer commences volume production of components or devices that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, to qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, sales of this product to the customer may be precluded or delayed, which may result in a decrease in our revenue and cause our business to suffer.

Winning business is subject to lengthy competitive selection processes that require us to incur significant expenditures. Even if we begin a product design, customers may decide to cancel or change their product plans, which could cause us to generate no revenue from a product and adversely affect our results of operations.

We are focused on securing design wins to develop RF receivers and RF receiver SoCs, MoCA and G.hn SoCs, DBS-ODU SoCs, physical medium devices for optical modules, interface and power management devices, and SoC solutions targeting infrastructure opportunities within the telecommunications, wireless, industrial and multimarket and Wi-Fi and broadband operator markets for use in our customers’ products. These selection processes typically are lengthy and can require us to incur significant design and development expenditures and dedicate scarce engineering resources in pursuit of a single customer opportunity. We may not win the competitive selection process and may never generate any revenue despite incurring significant design and development expenditures. These risks are exacerbated by the fact that some of our customers’ products likely will have short life cycles. Although this has not occurred to date, failure to obtain a design win could prevent us from offering an entire generation of a product. This could cause us to lose revenue and require us to write off obsolete inventory, and could weaken our position in future competitive selection processes. After securing a design win, we may experience delays in generating revenue from our products as a result of the lengthy development cycle typically required. Our customers generally take a considerable amount of time to evaluate our products. The typical time from early engagement by our sales force to actual product introduction runs from nine to twelve months for the consumer market, to as much as 18 to 24 months for the satellite markets, and 36 months or longer for industrial, wired and wireless infrastructure markets. The delays inherent in these lengthy sales cycles increase the risk that a customer will decide to cancel, curtail, reduce or delay its product plans, causing us to lose anticipated sales. In addition, any delay or cancellation of a customer’s plans could materially and adversely affect our financial results, as we may have incurred significant expense and generated no revenue. Finally, our customers’ failure to successfully market and sell their products could reduce demand for our products and materially and adversely affect our business, financial condition and results of operations. If we were unable to generate revenue after incurring substantial expenses to develop any of our products, our business would suffer.

Our operating results are subject to substantial quarterly and annual fluctuations and may fluctuate significantly due to a number of factors that could adversely affect our business and our stock price.

Our revenue and operating results have fluctuated in the past and are likely to fluctuate in the future. These fluctuations may occur on a quarterly and on an annual basis and are due to a number of factors, many of which are beyond our control. These factors include, among others:

•seasonality or cyclical fluctuations in our markets;

Table of Contents

•changes in end-user demand for the products manufactured and sold by our customers;

•the receipt, reduction or cancellation of significant orders by customers;

•fluctuations in the levels of component inventories held by our customers;

•the gain or loss of significant customers;

•market acceptance of our products and our customers’ products;

•our ability to develop, introduce, and market new products and technologies on a timely basis;

•the timing and extent of product development costs;

•new product announcements and introductions by us or our competitors;

•incurrence of research and development and related new product expenditures;

•government actions, by the United States, China or other countries, that impose barriers or restrictions that would impact our ability to sell or ship products to customers;

•currency fluctuations;

•fluctuations in IC manufacturing yields;

•significant warranty claims, including those not covered by our suppliers;

•changes in our product mix or customer mix;

•potential indemnification claims, including those arising as a result of our contractual arrangements or intellectual property disputes;

•intellectual property disputes;

•loss of key personnel or inability to attract, retain and motivate qualified skilled workers;

•impairment of long-lived assets, including masks and production equipment; and

•the effects of competitive pricing pressures, including decreases in average selling prices of our products.

These factors are difficult to forecast, and these, as well as other factors, could materially adversely affect our quarterly or annual operating results. We typically are required to incur substantial development costs in advance of a prospective sale with no certainty that we will ever recover these costs. A substantial amount of time may pass between a design win and the generation of revenue related to the expenses previously incurred, which can potentially cause our operating results to fluctuate significantly from period to period. In addition, a significant amount of our operating expenses are relatively fixed in nature due to our significant sales, research and development costs. Any failure to adjust spending or our operations quickly enough to compensate for a revenue shortfall could magnify its adverse impact on our results of operations.

Our business is subject to various international and U.S. laws and governmental regulations, and compliance with these laws and regulations may cause us to incur significant expenses. A failure to maintain compliance with applicable laws and regulations could result in a material adverse effect on our business and operating results, and we could be subject to civil or criminal penalties.

Our business is subject to various laws and regulations in the United States and other jurisdictions where we do business, including but not limited to laws, regulations and other legal requirements related to packaging; product content; labor and employment; imports; export controls; anti-corruption; personal and data privacy; cybersecurity; human rights; conflict minerals; environment, health and safety; competition and antitrust; and intellectual property ownership and infringement. These laws and regulations are complex, change frequently and with little or no notice, occasionally are conflicting or ambiguous, and have generally become more stringent over time. We may be required to incur significant costs to comply with these laws and regulations or to remedy violations. In addition, because many of our products are regulated or sold into regulated industries, we must comply with additional regulations in marketing our products. Although our policies, controls, and procedures are designed to maintain ongoing compliance with applicable laws, we cannot assure you that we have been or

Table of Contents

will be at all times in compliance with such laws and regulations. If we violate or fail to comply with any of them, a range of consequences could result, including fines, import/export restrictions, sales limitations, criminal and civil liabilities or other sanctions. The costs of complying with these laws (including the costs of any investigations, auditing and monitoring) could adversely affect our current or future business.

As indicated elsewhere in this report, we do a substantial portion of our business in Asia and particularly in China. There has been a substantial focus by regulators in the United States and Europe on the business practices of certain major Chinese technology companies. In October 2022, we restricted shipments and exports to certain major Chinese technology companies, including a semiconductor foundry and OSAT providers. While we intend to continue to conduct our businesses in compliance with all applicable laws, including laws relating to export controls and anti-corruption, it is possible that the nature of our business and customers could result in a review of our relationships and practices by regulatory authorities. At times, we may discover issues that we bring to the attention of the relevant government agencies, as we did on March 3, 2023. We could incur increased administrative and legal costs in order to respond to any inquiries or prepare voluntary self-disclosures to the appropriate government agency. Any failure to comply with applicable laws could adversely affect our business and operating results. We have implemented policies and procedures, including adoption of an anti-corruption policy and procedures with respect to applicable export control laws, but there can be no assurance that our policies and procedures will prove effective. The Company has adopted a new Code of Ethics and Business Conduct and will be implementing an enhanced Global Compliance and Ethics Program overseen by the Chief Compliance Officer.

Our products and operations are also subject to the rules of industrial standards bodies, like the International Standards Organization, as well as regulation by other agencies, such as the U.S. Federal Communications Commission. If we fail to adequately address any of these rules or regulations, our business could be harmed.

We must conform the manufacture and distribution of our semiconductors to various laws and adapt to regulatory requirements in all countries as these requirements change. If we fail to comply with these requirements in the manufacture or distribution of our products, we could be required to pay civil penalties, face criminal prosecution and, in some cases, be prohibited from distributing our products in commerce until the products or component substances are brought into compliance.

We have been and may in the future be subject to information technology failures, including security breaches, cyber-attacks, design defects or system failures, that could disrupt our operations, damage our reputation and adversely affect our business, operations, and financial results.

We rely on our information technology systems for the effective operation of our business and for the secure maintenance and storage of confidential data relating to our business and third-party businesses. In June 2020, we announced a security incident resulting from a Maze ransomware attack affecting certain but not all operational systems within our information technology infrastructure. Because we did not satisfy the attacker’s monetary demands, on June 15, 2020, the attacker released online certain proprietary information obtained from our network. Since that time, our internal information technology team, supplemented by a leading cyber defense firm, took steps aimed at containing and assessing this incident, including implementing enhanced security controls aimed at protecting our information technology systems. Since that event, security breaches and incidents, computer malware and computer hacking attacks have continued to become more prevalent and sophisticated. These threats are constantly evolving, making it increasingly difficult to successfully defend against or implement adequate preventive measures. We experience cyber-attacks of varying degrees on our technology infrastructure and systems and notwithstanding our defensive measures, experienced programmers, hackers or state actors may be able to penetrate our security controls through attacks such as phishing, impersonating authorized users, ransomware, viruses, worms and other malicious software programs, exploitation of design flaws, bugs and other security weaknesses and vulnerabilities, covert introduction of malware to computers and networks, including those using techniques that change frequently or may be disguised or difficult to detect, or designed to remain dormant until a triggering event or that may continue undetected for an extended period of time. Geopolitical tensions or conflicts may create heightened risk of cyber-attacks and attackers have used artificial intelligence and machine learning to launch more automated, targeted and coordinated attacks against targets. Businesses we acquire may increase the scope and complexity of our information technology systems, and this may increase our risk exposure to cyber-attack when there are difficulties integrating diverse legacy systems that support operations for the acquired businesses. Our information technology infrastructure also includes products and services provided by third parties, and these providers can experience breaches of their systems and products, or provide inadequate updates or support, which can impact the security of our systems and our proprietary or confidential information.

A cybersecurity incident or other compromise of our information technology systems could result in unauthorized publication of confidential business or proprietary information belonging to us, a customer, supplier, employee or other third party, including personal data, result in violations of privacy or other laws, expose us to a risk of litigation, cause us to incur

Table of Contents

direct losses if attackers initiate wire transfers or access our bank or investment accounts, or damage our reputation. More generally, any theft, loss, misuse, or other unauthorized processing of any confidential business or proprietary information, including personal data, collected, used, stored, transferred, or otherwise processed by us or on our behalf could result in significantly increased costs, expenses, damage to our reputation, and claims, litigation, demands, and regulatory investigations or other proceedings. The cost and operational consequences of implementing further data protection measures either as a response to specific breaches or incidents or as a result of evolving risks could be significant. In addition, our inability to use or access our information systems at critical points in time could adversely affect the timely and efficient operation of our business. Any delayed sales, significant costs or lost customers resulting from these technology failures could adversely affect our business, operations and financial results. We also may face difficulties or delays in identifying and remediating and otherwise responding to any security breach or incident.

From time-to-time, we upgrade software that we use in our business, including our enterprise resource planning, or ERP, system. Our business may be disrupted if our software does not work as planned or if we experience issues relating to any implementation, or accessing our software as has happened in a previous cybersecurity attack, in which case we may be unable to timely or accurately prepare financial reports, make payments to our suppliers and employees, or ship to, invoice and collect from our customers.

We may be subject to supply chain attacks where threat actors attempt to inject malicious code into our products thus infecting our products and the systems of our customers. Any such supply chain attack could have magnified damages to our business as a direct result of the attack as well as due to a loss of credibility or reputation with our customers. Such attempts are increasing in number and in technical sophistication, and if successful, expose us and the affected parties to risk of loss or misuse of proprietary or confidential information or disruptions of our business operations, including our manufacturing operations.

Third parties with which we conduct business, such as foundries, assembly and test contractors, and distributors, have access to certain portions of our sensitive data, and we rely on third parties to store and otherwise process data for us. We are dependent on the information security systems of these third parties and they face substantial security risks similar to those outlined above. Any security breaches or incidents or other unauthorized access by third parties to the systems of our suppliers, service providers, or other third parties with access to our sensitive data, or the existence of computer viruses, ransomware or other malicious code in their data, software, or hardware, could result in disruptions or failures of systems used in our business, payments to fraudulent bank accounts, and expose us to a risk of loss, misappropriation, unavailability and other unauthorized processing of information. Any of the foregoing, or the perception any of them has occurred, could have a material adverse impact on our business, operations and financial results.

Additionally, we cannot be certain that our insurance coverage will be adequate or otherwise protect us with respect to claims, expenses, fines, penalties, business loss, data loss, litigation, regulatory actions, or other impacts arising from any of the security breaches or incidents outlined above, or that such coverage will continue to be available on acceptable terms or at all. Any of these results could adversely affect our business, operations and financial results, potentially in a material manner.

We are subject to governmental laws, regulations and other legal obligations related to privacy, data protection, and cybersecurity.

The legislative, enforcement policy and regulatory framework for privacy, data protection and cybersecurity issues worldwide is rapidly evolving and complex and is likely to remain uncertain for the foreseeable future. We collect and otherwise process personal data and other data as part of our business processes and activities. This data is subject to a variety of U.S. and international laws and regulations, including oversight by various regulatory or other governmental bodies. Many foreign countries and governmental bodies, including China, the European Union and other relevant jurisdictions where we conduct business, have laws and regulations concerning the collection and use of personal data, and other data obtained from their residents or by businesses operating within their jurisdictions that are currently more restrictive than those in the U.S. These laws may require that our overall information technology security environment meet certain standards and/or be certified. For example, effective May 2018, the European Union adopted the General Data Protection Regulation, or GDPR, that imposed stringent data protection requirements and provided for greater penalties for noncompliance. The United Kingdom has adopted legislation that substantially implements the GDPR and provides for a similar penalty structure. Similarly, California has adopted the California Consumer Privacy Act of 2018, or CCPA, which took effect in 2020. The CCPA gives California residents the right to access, delete and opt out of certain sharing of their information, and imposes penalties for failure to comply. California has adopted a new law, the California Privacy Rights Act of 2020, or CPRA, that substantially expands the CCPA and was effective as of January 1, 2023. Additionally, other U.S. states continue to propose, and in certain cases adopt, privacy-focused legislation such as Colorado, Virginia, Utah, Connecticut and Iowa. In 2021, the National People’s Congress

Table of Contents

passed the Data Security Law of the People’s Republic of China, or the Data Security Law. The Data Security Law is the first comprehensive data security legislation in the People's Republic of China, or China, and aims to regulate a wide range of issues in relation to the collection, storage, processing, use, provision, transaction and publication of any kind of data. There is significant uncertainty in how regulators will interpret and enforce the law, but it contains provisions that allow substantial government oversight and include fines for failure to obtain required approval from China’s cyber and data protection regulators for cross-border personal data-related data transfers.

The laws outlined above are only a sample of the governmental laws, regulations and other legal obligations related to privacy, data protection, and cybersecurity to which we are subject. Various aspects of these laws, including their interpretation and enforcement, remain unclear, resulting in further uncertainty and potentially requiring us to modify our data practices and policies and to incur substantial additional costs and expenses in an effort to comply. Because the interpretation and application of many such laws and regulations, remain uncertain and continue to evolve, it is possible that these laws and regulations may be interpreted and applied in a manner that is inconsistent with our data management practices or the features of our products or solutions, and we could face fines, lawsuits, regulatory investigations, and other claims and penalties, and we could be required to fundamentally change our products or our business practices, all of which could have a material adverse effect on our business. Any inability, or perceived inability, to adequately address privacy and data protection concerns, or to comply with applicable laws, regulations, policies, industry standards, contractual obligations or other legal obligations, even if unfounded, could result in additional cost and liability to us, damage our reputation, inhibit sales and have a material adverse effect on our business, results of operations, and financial condition.

Our products must conform to industry standards in order to be accepted by end users in our markets.

Generally, our products comprise only a part or parts of a communications device. All components of these devices must uniformly comply with industry standards in order to operate efficiently together. We depend on companies that provide other components of the devices to support prevailing industry standards. Many of these companies are significantly larger and more influential in driving industry standards than we are. Some industry standards may not be widely adopted or implemented uniformly, and competing standards may emerge that may be preferred by our customers or end users. If larger companies do not support the same industry standards that we do, or if competing standards emerge, market acceptance of our products could be adversely affected, which would harm our business.

Products for communications applications are based on industry standards that are continually evolving. Our ability to compete in the future will depend on our ability to identify and ensure compliance with these evolving industry standards. The emergence of new industry standards could render our products incompatible with products developed by other suppliers. As a result, we could be required to invest significant time and effort and to incur significant expense to redesign our products to ensure compliance with relevant standards. If our products are not in compliance with prevailing industry standards for a significant period of time, we could miss opportunities to achieve crucial design wins. We may not be successful in developing or using new technologies or in developing new products or product enhancements that achieve market acceptance. Our pursuit of necessary technological advances may require substantial time and expense.

As of March 31, 2023, our aggregate indebtedness was $125.0 million. Such indebtedness adversely affects our operating results and cash-flows as we satisfy our underlying interest and principal payment obligations and contains financial and operational covenants that could adversely affect our operational freedom or ability to pursue strategic transactions that we would otherwise consider to be in the best interests of stockholders, including obtaining additional indebtedness to finance such transactions.

As of March 31, 2023, our aggregate indebtedness was $125.0 million from an initial secured term B loan facility, or the Initial Term Loan under the June 23, 2021 Credit Agreement. The June 23, 2021 Credit Agreement also provides for a revolving credit facility of up to $100.0 million, or the Revolving Facility, which remains undrawn as of March 31, 2023. The credit agreement also permits us to request incremental loans in an aggregate principal amount not to exceed the sum of an amount equal to the greater of (x) $175.0 million and (y) 100% of “Consolidated EBITDA” (as defined in such agreement), plus the amount of certain voluntary prepayments, plus an unlimited amount that is subject to pro forma compliance with certain first lien net leverage ratio, secured net leverage ratio and total net leverage ratio tests.

The Initial Term Loan under the June 23, 2021 Credit Agreement has a seven-year term expiring in June 2028 and bears interest at either an Adjusted LIBOR plus a fixed applicable margin of 2.25% or an Adjusted Base Rate plus a fixed applicable margin of 1.25%, at our option. Commencing on September 30, 2021, the Initial Term Loan under the June 23, 2021 Credit Agreement will amortize in equal quarterly installments equal to 0.25% of the original principal amount, with the balance payable on June 23, 2028. We are subject to commitment fees ranging from 0.175% to 0.25% on the undrawn portion of the

Table of Contents

Revolving Facility, and any outstanding loans under the Revolving Facility will bear interest at either an Adjusted LIBOR plus a margin of 1.00% to 1.75% or an Adjusted Base Rate plus a margin of 0% to 0.75%. Our obligations under the June 23, 2021 Credit Agreement are required to be guaranteed by certain of our domestic subsidiaries meeting materiality thresholds set forth in the credit agreement. Such obligations, including the guaranties, are secured by substantially all of our assets and those of the subsidiary guarantors.

Our material indebtedness adversely affects our operating expenses through increased interest payment obligations and adversely affects our ability to use cash generated from operations as we repay interest and principal under the term loans. In addition, the Revolving Facility provisions under the June 23, 2021 Credit Agreement include financial covenants such as an initial maximum secured net leverage ratio of 3.5 to 1, which temporarily increases to 3.75 to 1 following the consummation of certain material permitted acquisitions, and operational covenants that may adversely affect our ability to engage in certain activities, including obtaining additional financing, granting liens, undergoing certain fundamental changes, or making investments or certain restricted payments, and selling assets, and similar transactions, without obtaining the consent of the lenders, which may or may not be forthcoming. The Initial Term Loan under the June 23, 2021 Credit Agreement is only subject to operational covenants. Lastly, our borrowing costs can be affected by periodic credit ratings from independent rating agencies. Such ratings are largely based on our performance, which may be measured by credit metrics such as leverage and interest coverage ratios. Accordingly, outstanding indebtedness could adversely affect our operational freedom or ability to pursue strategic transactions that we would otherwise consider to be in the best interests of stockholders, including obtaining additional indebtedness to finance such transactions.

Specifically, our indebtedness has important consequences to investors in our common stock, including the following:

•we are subject to variable interest rate risk because our interest rate under the Initial Term Loan under the June 23, 2021 Credit Agreement varies based on a fixed margin of 2.25% per annum over an adjusted LIBOR rate or 1.25% per annum over an adjusted base rate and our interest rate for any outstanding principal under the revolving credit facility varies based a margin of 0% to 0.75% over adjusted base rate or a margin of 1.00% to 1.75% over an adjusted LIBOR rate, and we are also subject to commitment fees ranging from 0.175% to 0.25% on the undrawn portion of the Revolving Facility. If interest rates were to increase substantially, it would adversely affect our operating results and could affect our ability to service our indebtedness;

•a portion of our cash flows is dedicated to the payment of interest and when applicable, principal, on our indebtedness and other obligations and will not be available for use in our business;

•our level of indebtedness could limit our flexibility in planning for, or reacting to, changes in our business and the markets in which we operate, including limiting our future investments or ability to enter into acquisitions and strategic partnerships; and

•our high degree of indebtedness may make us more vulnerable to changes in general economic conditions and/or a downturn in our business, thereby making it more difficult for us to satisfy our obligations.

If we fail to make required debt payments, or if we fail to comply with financial or other covenants in our debt service agreements, which include a maximum leverage ratio, we would be in default under the terms of these agreements. Subject to customary cure rights, any default would permit the holders of the indebtedness to accelerate repayment of this debt and could cause defaults under other indebtedness that we have, any of which could have a material adverse effect on the trading price of our common stock.

We may still incur substantially more debt or take other actions, which would intensify the risks discussed immediately above.

We and our subsidiaries may, subject to any limitations in the terms of our existing loan facilities or the Senior Secured Credit Facilities, incur additional debt, secure existing or future debt, recapitalize our debt or take a number of other actions that are not limited by the terms of our term loans that could have the effect of diminishing our ability to make payments under the indebtedness when due. If we incur any additional debt, the related risks that we and our subsidiaries face could intensify.

We plan to finance the cash portion of the purchase price of the merger with Silicon Motion with approximately $3.5 billion of cash on hand and new debt. In connection with entering into the Merger Agreement, we entered into a commitment letter, dated as of May 5, 2022, and amended on June 17, 2022 and October 24, 2022 with Wells Fargo Bank, N.A. and Wells Fargo Securities, LLC, or collectively, Wells Fargo, pursuant to which, subject to the terms and conditions set forth therein, Wells Fargo has committed to provide us (i) a senior secured term B loan facility in an aggregate principal amount of up to

Table of Contents

$2.7375 billion, (ii) a senior secured term A loan facility in an aggregate principal amount of up to $512.5 million, and (iii) a senior secured revolving credit facility in an aggregate principal amount of up to $250.0 million. The funding of these secured credit facilities provided for in the commitment letter is contingent on the satisfaction of customary conditions, including (i) the execution and delivery of definitive documentation with respect to such credit facilities in accordance with the terms sets forth in the commitment letter and (ii) the consummation of the merger in accordance with the Merger Agreement.

In addition to our pending merger with Silicon Motion, we may, from time to time, make additional business acquisitions or investments, which involve significant risks.

We have completed multiple acquisitions in the past eight years. We may also enter into alliances or make investments in other businesses to complement our existing product offerings, augment our market coverage or enhance our technological capabilities. Any such transactions has resulted and could result in:

•issuances of equity securities dilutive to our existing stockholders;

•substantial cash payments;

•the incurrence of substantial debt and assumption of unknown liabilities;

•large one-time write-offs;

•amortization expenses related to intangible assets;

•a limitation on our ability to use our net operating loss carryforwards;

•the diversion of management's time and attention from operating our business to acquisition integration challenges;

•stockholder or other litigation relating to the transaction;

•adverse tax consequences;

•costs and expenses associated with any undisclosed or potential liabilities; and

•the potential loss of, or ability to attract, key personnel, customers and suppliers of the acquired businesses.

To the extent we pay the purchase price of any acquisition or investment in cash or through borrowings under our Revolving Facility, it would reduce our cash balances and/or result in indebtedness we must service, which may have a material adverse effect on our business and financial condition. If the purchase price is paid with our stock, it would be dilutive to our stockholders. In addition, we may assume liabilities associated with a business acquisition or investment, including unrecorded liabilities that are not discovered at the time of the transaction, and the repayment of those liabilities may have a material adverse effect on our financial condition.

Integrating acquired organizations and their products and services, including the integration of completed acquisitions, may be expensive, time-consuming and a strain on our resources and our relationships with employees, customers, distributors and suppliers, and ultimately may not be successful. The benefits or synergies we may expect from the acquisition of complementary or supplementary businesses may not be realized to the extent or in the time frame we initially anticipate. Some of the risks that may affect our ability to successfully integrate acquired businesses include those associated with:

•failure to successfully further develop the acquired products or technology;

•conforming the acquired company’s standards, policies, processes, procedures and controls with our operations;

•coordinating new product and process development, especially with respect to highly complex technologies;

•loss of key employees or customers of the acquired business;

•hiring additional management and other key personnel;

•in the case of foreign acquisitions, the need to integrate operations across different cultures and languages and to address the particular economic, currency, political and regulatory risks associated with specific countries;

•increasing the scope, geographic diversity and complexity of our operations;

Table of Contents

•consolidation of facilities, integration of the acquired businesses' accounting, human resource and other administrative functions and coordination of product, engineering and sales and marketing functions;

•the geographic distance between the businesses;

•liability for activities of the acquired businesses before the acquisition, including patent and trademark infringement claims, violations of laws, commercial disputes, tax liabilities and other known and unknown liabilities; and

•litigation or other claims in connection with the acquired businesses, including claims for terminated employees, customers, former stockholders or other third parties.

We may not be able to identify suitable acquisition or investment candidates, or even if we do identify suitable candidates, they may be difficult to finance, expensive to fund and there is no guarantee that we can obtain any necessary antitrust approvals or complete such transactions on terms that are favorable to us.

We have in the past been and may in the future be party to ligation related to acquisitions. Any adverse determination in litigation resulting from acquisitions could have a material adverse effect on our business and operating results.

Any legal proceedings or claims against us could be costly and time-consuming to defend and could harm our reputation regardless of the outcome

We may in the future become subject to legal proceedings and claims that arise in the ordinary course of business, including intellectual property, product liability, employment, class action, whistleblower and other litigation claims, and governmental and other regulatory investigations and proceedings. Such matters can be time-consuming, divert management's attention and resources, cause us to incur significant expenses or liability, or require us to change our business practices. For example. we have implemented a reduction in force and the attendant layoffs has resulted and could result in the risk of claims being made by or on behalf of affected employees. In addition, the expense of litigation and the timing of this expense from period to period are difficult to estimate, subject to change, and could adversely affect our financial condition and results of operations. Because of the potential risks, expenses, and uncertainties of litigation, we may, from time to time, settle disputes, even where we have meritorious claims or defenses, by agreeing to settlement agreements. Any of the foregoing could adversely affect our business, financial condition, and results of operations.

Risks Relating to Intellectual Property

We have settled in the past intellectual property litigation, are currently facing, and may in the future face additional claims of intellectual property infringement. Any current or future litigation could be time-consuming, costly to defend or settle and result in the loss of significant rights.

The semiconductor industry is characterized by companies that hold large numbers of patents and other intellectual property rights and that vigorously pursue, protect and enforce intellectual property rights. Third parties have in the past and may in the future assert against us and our customers and distributors their patent and other intellectual property rights to technologies that are important to our business. For example, we were recently involved in a litigation with Bell Semiconductor, which has since been settled pursuant to a Settlement and Patent License Agreement. In addition, from time to time, we receive correspondence from competitors and other third parties seeking to engage us in discussions concerning potential claims against us, and we receive correspondence from customers seeking indemnification for potential claims related to infringement claims asserted against down-stream users of our products. We investigate these requests and claims as received and could be required to enter license agreements with respect to third party intellectual property rights or indemnify third parties, either of which could have a material adverse effect on our future operating results.

Claims that our products, processes or technology infringe third-party intellectual property rights, regardless of their merit or resolution are costly to defend or settle and could divert the efforts and attention of our management and technical personnel. In addition, many of our customer and distributor agreements require us to indemnify and defend our customers or distributors from third-party infringement claims and pay damages and attorneys’ fees in the case of adverse rulings. Claims of this sort also could harm our relationships with our customers or distributors and might deter future customers from doing business with us. In order to maintain our relationships with existing customers and secure business from new customers, we have been required from time to time to provide additional assurances beyond our standard terms. If any of our current or future proceedings result in an adverse outcome, we could be required to:

•cease the manufacture, use or sale of the infringing products, processes or technology;

Table of Contents

•pay substantial damages, indemnification expenses and attorneys’ fees;

•expend significant resources to develop non-infringing products, processes or technology;

•license technology from the third-party claiming infringement, which license may not be available on commercially reasonable terms, or at all;

•cross-license our technology to a competitor to resolve an infringement claim, which could weaken our ability to compete with that competitor; or

•pay substantial damages to our customers or end users to discontinue their use of or to replace infringing technology sold to them with non-infringing technology.

Any of the foregoing results could have a material adverse effect on our business, financial condition, and results of operations.

We utilize a significant amount of intellectual property in our business. If we are unable to protect our intellectual property, our business could be adversely affected.

Our success depends in part upon our ability to protect our intellectual property. To accomplish this, we rely on a combination of intellectual property rights, including patents, copyrights, trademarks and trade secrets in the United States and in selected foreign countries where we believe filing for such protection is appropriate. Effective patent, copyright, trademark and trade secret protection may be unavailable, limited or not applied for in some countries. Some of our products and technologies are not covered by any patent or patent application. We cannot guarantee that:

•any of our present or future patents or patent claims will not lapse or be invalidated, circumvented, challenged or abandoned;

•our intellectual property rights will provide competitive advantages to us;

•our ability to assert our intellectual property rights against potential competitors or to settle current or future disputes will not be limited by our agreements with third parties;

•any of our pending or future patent applications will be issued or have the coverage originally sought;

•our intellectual property rights will be enforced in jurisdictions where competition may be intense or where legal protection may be weak;

•any of the trademarks, copyrights, trade secrets or other intellectual property rights that we presently employ in our business will not lapse or be invalidated, circumvented, challenged or abandoned; or

•we will not lose the ability to assert our intellectual property rights against or to license our technology to others and collect royalties or other payments.

In addition, our competitors or others may design around our protected patents or technologies. Effective intellectual property protection may be unavailable or more limited in one or more relevant jurisdictions relative to those protections available in the United States, or may not be applied for in one or more relevant jurisdictions. If we pursue litigation to assert our intellectual property rights, an adverse decision in any of these legal actions could limit our ability to assert our intellectual property rights, limit the value of our technology or otherwise negatively impact our business, financial condition and results of operations.

Monitoring unauthorized use of our intellectual property is difficult and costly. Unauthorized use of our intellectual property may have occurred or may occur in the future. Although we have taken steps to minimize the risk of this occurring, any such failure to identify unauthorized use and otherwise adequately protect our intellectual property would adversely affect our business. Moreover, if we are required to commence litigation, whether as a plaintiff or defendant as has occurred in the past, not only will this be time-consuming, but we will also be forced to incur significant costs and divert our attention and efforts of our employees, which could, in turn, result in lower revenue and higher expenses.

We also rely on customary contractual protections with our customers, suppliers, distributors, employees and consultants, and we implement security measures to protect our trade secrets. We cannot assure you that these contractual

Table of Contents

protections and security measures will not be breached, that we will have adequate remedies for any such breach or that our suppliers, employees or consultants will not assert rights to intellectual property arising out of such contracts.

In addition, we have a number of third-party patent and intellectual property license agreements. Some of these license agreements require us to make one-time payments or ongoing royalty payments. Also, a few of our license agreements contain most-favored nation clauses or other price restriction clauses which may affect the amount we may charge for our products, processes or technology. We cannot guarantee that the third-party patents and technology we license will not be licensed to our competitors or others in the semiconductor industry. In the future, we may need to obtain additional licenses, renew existing license agreements or otherwise replace existing technology. We are unable to predict whether these license agreements can be obtained or renewed or the technology can be replaced on acceptable terms, or at all.

When we settled a trademark dispute with Linear Technology Corporation, we agreed not to register the “MAXLINEAR” mark or any other marks containing the term “LINEAR”. We may continue to use “MAXLINEAR” as a corporate identifier, including to advertise our products and services, but may not use that mark on our products. Due to our agreement not to register the “MAXLINEAR” mark, our ability to effectively prevent third parties from using the “MAXLINEAR” mark in connection with similar products or technology may be affected. If we are unable to protect our trademarks, we may experience difficulties in achieving and maintaining brand recognition and customer loyalty.

We face risks related to security vulnerabilities in our products.

We regularly are subject to security vulnerabilities with respect to our products as well as intellectual property that we purchase or license from third parties for use in our products. Our products are used in application areas that create new or increased cybersecurity and privacy risks, including applications that gather and process large amounts of data, such as the cloud or Internet of Things, and critical infrastructure, payment card applications, and automotive applications. Security features in our products cannot make our products entirely secure, and security vulnerabilities identified in our products have resulted in, and are expected to continue to result in, attempts by third parties to identify and exploit additional vulnerabilities. Vulnerabilities are not always mitigated before they become known. We, our customers, and the users of our products do not always promptly learn of or have the ability to fully assess the magnitude or effects of a vulnerability, including the extent, if any, to which a vulnerability has been exploited.

Mitigation techniques designed to address security vulnerabilities, including software and firmware updates or other preventative measures, are not always available on a timely basis, or at all, and at times do not operate as intended or effectively resolve vulnerabilities for all applications. In addition, we are often required to rely on third parties, including hardware, software, and services vendors, as well as our customers and end users, to develop and/or deploy mitigation techniques, and the availability, effectiveness, and performance impact of mitigation techniques can depend solely or in part on the actions of these third parties in determining whether, when, and how to develop and deploy mitigations. We and such third parties make prioritization decisions about which vulnerabilities to address, which can delay, limit, or prevent development or deployment of a mitigation and harm our reputation. Subsequent events or new information can develop that changes our assessment of the impact of a security vulnerability, which can cause certain claims or customer satisfaction considerations, as well as result in litigation or regulatory inquiries or actions over these matters.

Security vulnerabilities and/or mitigation techniques can result in adverse performance or power effects, reboots, system instability or unavailability, loss of functionality, non-compliance with standards, data loss or corruption, unpredictable system behavior, decisions by customers, regulators and end users to limit or change the applications in which they use our products or product features, and/or the misappropriation of data by third parties. Security vulnerabilities and any limitations or adverse effects of mitigation techniques can adversely affect our results of operations, financial condition, customer relationships, prospects, and reputation in a number of ways, any of which may be material.

The use of open source software in our products, processes and technology may expose us to additional risks and harm our intellectual property.

Our products, processes and technology sometimes utilize and incorporate software that is subject to an open source license. Open source software is typically freely accessible, usable and modifiable. Certain open source software licenses require a user who intends to distribute the open source software as a component of the user’s software to disclose publicly part or all of the source code to the user’s software. In addition, certain open source software licenses require the user of such software to make any derivative works of the open source code available to others on unfavorable terms or at no cost. This can subject previously proprietary software to open source license terms.

Table of Contents

While we monitor the use of all open source software in our products, processes and technology and try to ensure that no open source software is used in such a way as to require us to disclose the source code to the related product, processes or technology when we do not wish to do so, such use could inadvertently occur. Additionally, if a third party software provider has incorporated certain types of open source software into software we license from such third party for our products, processes or technology, we could, under certain circumstances, be required to disclose the source code to our products, processes or technology. This could harm our intellectual property position and have a material adverse effect on our business, results of operations and financial condition.

Risks Relating to Reliance on Third-Parties

We do not have our own manufacturing facilities and rely on a limited number of third parties to manufacture, assemble, and test our products. The failure to manage our relationships with our third-party contractors successfully, or impacts from volatility in global supply, natural disasters, public health crises, or other labor stoppages in the regions where such contractors operate, could adversely affect our ability to market and sell our products.

We operate an outsourced manufacturing business model that utilizes third-party foundry and assembly and test capabilities. As a result, we rely on third-party foundry wafer fabrication, including sole sourcing for many components or products. Currently, the majority of our products are manufactured by Semiconductor Manufacturing International Corporation, or SMIC, Taiwan Semiconductor Manufacturing Company, Limited, or TSMC, and United Microelectronics Corporation, or UMC, at foundries located in Taiwan, Singapore, and China. We also rely on Intel Corporation, or Intel, for certain products on a turnkey basis under a supply agreement with an initial term of five years. We also use third-party contractors for all of our assembly and test operations.

Relying on third party manufacturing, assembly and testing presents significant risks to us, including the following:

•capacity shortages during periods of high demand or from events beyond our control or inventory oversupply during periods of decreased demand. For example, we have experienced inventory oversupply in certain of our products due to changes in customer demand which has added to volatility in managing the business. Inventory oversupply could also lead to inventory write-downs, including charges for any excess or obsolete inventory which, if material, could negatively impact our gross margins;

•failure by us, our customers, or their end customers to qualify a selected supplier;

•reduced control over delivery schedules and quality;

•shortages of materials;

•misappropriation of our intellectual property;

•limited warranties on wafers or products supplied to us;

•potential increases in prices; and

•our use of SMIC, which is currently a restricted party on the BIS entity list, to manufacture certain of our products may be impaired if one or more of the following were to occur: (1) we are unable to obtain U.S. export licenses authorizing its interactions and technology exchanges with SMIC, or (2) if BIS increases export control restrictions to SMIC without the ability for us to obtain a U.S. export license, or (3) U.S. providers of semiconductor manufacturer equipment are unable to export such equipment or related spare or replacement parts used in the manufacture of our products, or obtain a license to export such equipment and parts, to SMIC.

The ability and willingness of our third-party contractors to perform is largely outside our control. If one or more of our contract manufacturers or other outsourcers fails to perform its obligations in a timely manner or at satisfactory quality levels, our ability to bring products to market and our reputation could suffer. For example, in the event that manufacturing capacity is reduced or eliminated at one or more facilities, manufacturing could be disrupted, we could have difficulties fulfilling our customer orders and our net revenue could decline. In addition, if these third parties fail to deliver quality products and components on time and at reasonable prices, we could have difficulties fulfilling our customer orders, our net revenue could decline and our business, financial condition and results of operations would be adversely affected.

Additionally, our product shipment and manufacturing capacity may be similarly reduced or eliminated at one or more facilities due to the fact that the majority of our fabrication and assembly and test contractors are all located in the Pacific Rim

Table of Contents

region, principally in China, Taiwan, and Singapore. The risk of earthquakes in these geographies is significant due to the proximity of major earthquake fault lines, and Taiwan in particular is also subject to typhoons and other Pacific storms, and more recently, a drought impacting the water supply which chip manufacturers rely upon to fabricate chip products. Earthquakes, fire, flooding, drought, or other natural disasters in Taiwan or the Pacific Rim region, or political unrest, war, labor strikes, work stoppages or public health crises, such as the outbreak of COVID-19, in countries where our contractors’ facilities are located could result in the disruption of our product shipments, foundry, assembly, or test capacity. For example, as a result of the extension of the lunar new year holidays due to the outbreak of COVID-19, certain of our product shipments from China were temporarily delayed in the first quarter of 2020. Although we continue to monitor impacts from COVID-19 globally on our business, it is currently unknown whether any resurgence of the outbreak will occur and disrupt our product shipments or impact manufacturing in the region over future periods. If such disruption were to recur over a prolonged period, it could have a material impact on our revenues and our business. Any disruption resulting from similar events on a larger scale or over a prolonged period could cause significant delays in shipments of our products until we are able to resume such shipments, or shift our manufacturing, assembly, or test from the affected contractor to another third-party vendor, if needed. If such disruption were to recur over a prolonged period, it could have a material impact on our revenue and business. There can be no assurance that alternative capacity could be obtained on favorable terms, if at all.

We are subject to risks associated with our distributors’ product inventories and product sell-through. Should any of our distributors cease or be forced to stop distributing our products, our business would suffer.

We currently sell a large portion of our products to customers through our distributors, who maintain their own inventories of our products. Sales to distributors accounted for approximately 43% and 47% of our net revenue in the three months ended March 31, 2023 and 2022, respectively. Upon shipment of product to these distributors, title to the inventory transfers to the distributor and the distributor is invoiced, generally with 30 to 60 day terms. Distributor sales are also recognized upon shipment to the distributor and estimates of future pricing credits and/or stock rotation rights reduce revenue recognized to the net amount before the actual amounts are known. If our estimates of such credits and rights are materially understated it could cause subsequent adjustments that negatively impact our revenues and gross profits in a future period.

If our distributors are unable to sell an adequate amount of their inventories of our products in a given quarter to manufacturers and end users or if they decide to decrease their inventories of our products for any reason, our sales through these distributors and our revenue may decline. In addition, if some distributors decide to purchase more of our products than are required to satisfy end customer demand in any particular quarter, inventories at these distributors would grow in that quarter. These distributors could then reduce future orders until inventory levels realign with end customer demand, which could adversely affect our product revenue.

Our reserve estimates with respect to the products stocked by our distributors are based principally on reports provided to us by our distributors, typically on a weekly basis. To the extent that this resale and channel inventory data is inaccurate or not received in a timely manner, we may not be able to make reserve estimates accurately or at all.

We do not have any long-term supply contracts with our contract manufacturers or suppliers, and any disruption in our supply of products or materials could have a material adverse effect on our business, revenue and operating results.

While certain products are supplied to us by Intel on a turnkey basis under the terms of a supply agreement with an initial term of five years, currently we do not have long-term supply contracts with any other third-party vendors, including but, not limited to SMIC, TSMC, and UMC. We make substantially all of our purchases on a purchase order basis, and our contract manufacturers are not required to supply us products for any specific period or in any specific quantity. Foundry capacity may not be available when we need it or at reasonable prices. Availability of foundry capacity has in the past been reduced from time to time due to strong demand. Foundries can allocate capacity to the production of other companies’ products and reduce deliveries to us on short notice. It is possible that foundry customers that are larger and better financed than we are, or that have long-term agreements with our foundry, may induce our foundry to reallocate capacity to them. This reallocation could impair our ability to secure the supply of components that we need. We generally place orders for products with some of our suppliers approximately four to five months prior to the anticipated delivery date, with order volumes based on our forecasts of demand from our customers. Accordingly, if we inaccurately forecast demand for our products, we may be unable to obtain adequate and cost-effective foundry or assembly capacity from our third-party contractors to meet our customers’ delivery requirements, which could harm our reputation and customer relationships, or we may accumulate excess inventories. On occasion, we have been unable to adequately respond to unexpected increases in customer purchase orders and therefore were unable to benefit from this incremental demand. None of our third-party contractors has provided any assurance to us that adequate capacity will be available to us within the time required to meet additional demand for our products.

Table of Contents

We rely on third parties to provide services and technology necessary for the operation of our business. Any failure of one or more of our partners, vendors, suppliers or licensors to provide these services or technology could have a material adverse effect on our business.

We rely on third-party vendors to provide critical services, including, among other things, services related to accounting, billing, human resources, information technology, network development, network monitoring, in-licensing and intellectual property that we cannot or do not create or provide ourselves. We depend on these vendors to ensure that our corporate infrastructure will consistently meet our business requirements. The ability of these third-party vendors to successfully provide reliable and high quality services is subject to technical and operational uncertainties that are beyond our control. While we may be entitled to damages if our vendors fail to perform under their agreements with us, our agreements with these vendors limit the amount of damages we may receive. In addition, we do not know whether we will be able to collect on any award of damages or that these damages would be sufficient to cover the actual costs we would incur as a result of any vendor’s failure to perform under its agreement with us. Any failure of our corporate infrastructure could have a material adverse effect on our business, financial condition and results of operations. Upon expiration or termination of any of our agreements with third-party vendors, we may not be able to replace the services provided to us in a timely manner or on terms and conditions, including service levels and cost, that are favorable to us and a transition from one vendor to another vendor could subject us to operational delays and inefficiencies until the transition is complete.

Additionally, we incorporate third-party technology into and with some of our products, and we may do so in future products. The operation of our products could be impaired if errors occur in the third-party technology we use. It may be more difficult for us to correct any errors in a timely manner if at all because the development and maintenance of the technology is not within our control. There can be no assurance that these third parties will continue to make their technology, or improvements to the technology, available to us, or that they will continue to support and maintain their technology. Further, due to the limited number of vendors of some types of technology, it may be difficult to obtain new licenses or replace existing technology. Any impairment of the technology or our relationship with these third parties could have a material adverse effect on our business.

Risks Relating to Our Common Stock

Our management team may use our available cash and cash equivalents in ways with which you may not agree or in ways which may not yield a return.

We use our cash and cash equivalents for general corporate purposes, including working capital and for repayment of outstanding long-term debt. We may also, in the future, use a portion of our assets to acquire other complementary businesses, products, services or technologies. Our management has considerable discretion in the application of our cash and cash equivalents, and resources, and you will not have the opportunity to assess whether these liquid assets are being used in a manner that you deem best to maximize your return. We may use our available cash and cash equivalents and resources for corporate purposes that do not increase our operating results or market value. In addition, in the future our cash and cash equivalents, and resources may be placed in investments that do not produce significant income or that may lose value.

Anti-takeover provisions in our charter documents and under Delaware law could make an acquisition of us more difficult, limit attempts by our stockholders to replace or remove our current management and limit the market price of our common stock.

Provisions in our certificate of incorporation and bylaws, as amended and restated, may have the effect of delaying or preventing a change of control or changes in our management. These provisions provide for the following:

•authorize our Board of Directors to issue, without further action by the stockholders, up to 25,000,000 shares of undesignated preferred stock;

•require that any action to be taken by our stockholders be effected at a duly called annual or special meeting and not by written consent;

•specify that special meetings of our stockholders can be called only by our Board of Directors, our Chairman of the Board of Directors, or our President;

•establish an advance notice procedure for stockholder approvals to be brought before an annual meeting of our stockholders, including proposed nominations of persons for election to our Board of Directors;

Table of Contents

•establish that our Board of Directors is divided into three classes, Class I, Class II and Class III, with each class serving staggered terms;

•provide that our directors may be removed only for cause;

•provide that vacancies on our Board of Directors may be filled only by a majority of directors then in office, even though less than a quorum;

•specify that no stockholder is permitted to cumulate votes at any election of directors; and

•require supermajority votes of the holders of our common stock to amend specified provisions of our charter documents.

These provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our Board of Directors, which is responsible for appointing the members of our management. In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which generally restricts a Delaware corporation from engaging in any of a broad range of business combinations with any “interested” stockholder for a period of three years following the date on which the stockholder became an “interested” stockholder.

Our share price may be volatile as a result of various factors.

The trading price of our common stock is highly volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. For example, in the three months ended March 31, 2023, the trading price of our common stock ranged from a low of $32.00 to a high of $43.66. These factors include those discussed in this “Risk Factors” section of the Quarterly Report on Form 10-Q and others such as:

•any developments related to our pending merger with Silicon Motion;

•actual or anticipated fluctuations in our financial condition and operating results;

•overall conditions in the semiconductor market;

•addition or loss of significant customers;

•changes in laws or regulations applicable to our products, including export controls;

•geopolitical changes impacting our business, including with respect to China and Taiwan;

•actual or anticipated changes in our growth rate relative to our competitors;

•announcements of technological innovations by us or our competitors;

•announcements by us or our competitors of significant acquisitions, strategic partnerships, joint ventures, or capital commitments;

•departures of, and inability to attract, qualified key personnel;

•competition from existing products or new products that may emerge;

•issuance of new or updated research or reports by securities analysts;

•fluctuations in the valuation of companies perceived by investors to be comparable to us;

•disputes or other developments related to proprietary rights, including patents, litigation matters, and our ability to obtain intellectual property protection for our technologies;

•acquisitions may not be accretive and may cause dilution to our earnings per share;

•announcement or expectation of additional financing efforts;

•sales of our common stock by us or our stockholders; and

Table of Contents

•general economic and market conditions, including the impacts from sanctions against Russia and the military conflict in Ukraine, increased inflationary pressures, interest rate changes, and the global COVID-19 pandemic.

Furthermore, the stock markets have experienced extreme price and volume fluctuations that have affected the market prices of equity securities of many companies. These fluctuations often have been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political, and market conditions such as recessions, interest rate changes or international currency fluctuations, may negatively impact the market price of our common stock. In the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We have been and may continue to be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.

We have adopted a stock repurchase program to repurchase shares of our common stock; however, any future decisions to reduce or discontinue purchasing our common stock pursuant to our stock repurchase programs could cause the market price for our common stock to decline.

Our share repurchase program has been temporarily suspended since July 2022 due to our pending merger with Silicon Motion. Although our board of directors has authorized a stock repurchase program, any determination to resume our stock repurchase program and execute our stock repurchase program will be subject to, among other things, our financial position and results of operations, available cash and cash flow, capital requirements, and other factors, as well as our board of director’s continuing determination that the repurchase program are in the best interests of our shareholders and is in compliance with all laws and agreements applicable to the repurchase program. Our stock repurchase program does not obligate us to acquire any common stock. If we fail to meet any expectations related to stock repurchases, the market price of our common stock could decline, and could have a material adverse impact on investor confidence. Additionally, price volatility of our common stock over a given period may cause the average price at which we repurchase our common stock to exceed the stock’s market price at a given point in time.

We may further increase or decrease the amount of repurchases of our common stock in the future. Any reduction or discontinuance by us of repurchases of our common stock pursuant to our current stock repurchase program could cause the market price of our common stock to decline. Moreover, in the event repurchases of our common stock are reduced or discontinued, our failure or inability to resume repurchasing common stock at historical levels could result in a lower market valuation of our common stock.

If securities or industry analysts do not publish research or reports about our business, or publish negative reports about our business, our share price and trading volume could decline.

The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us or our business. We do not have any control over these analysts. If one or more of the analysts who cover us downgrade our shares or change their opinion of our shares, our share price would likely decline. If one or more of these analysts cease coverage of us or fails to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our share price or trading volume to decline.

Future sales of our common stock in the public market could cause our share price to decline.

Sales of a substantial number of shares of our common stock in the public market, or the perception that these sales might occur, could depress the market price of our common stock and could impair our ability to raise capital through the sale of additional equity securities. As of March 31, 2023, we had approximately 80.0 million shares of common stock outstanding.

All shares of our common stock are freely tradable without restrictions or further registration under the Securities Act unless held by our “affiliates,” as that term is defined under Rule 144 of the Securities Act.

Our Executive Incentive Bonus Plan permits the settlement of awards under the plan in the form of shares of our common stock. We have issued shares of our common stock to settle such bonus awards for our employees, including executives, for the 2014 to 2022 performance periods, and we intend to continue this practice in the foreseeable future. We issued 0.9 million shares of our common stock for the 2022 performance period in February 2023. If we issue additional shares of our common stock to settle bonus awards in the future, such shares may be freely sold in the public market immediately following the issuance of such shares, subject to the applicable conditions of Rule 144 and our insider trading policy, and the issuance of such shares may have a material adverse effect on our share price once they are issued.

Table of Contents

We do not intend to pay dividends for the foreseeable future.

We have never declared or paid any cash dividends on our common stock and do not intend to pay any cash dividends in the foreseeable future. We anticipate that we will retain all of our future earnings for use in the development of our business and for general corporate purposes. Any determination to pay dividends in the future will be at the discretion of our Board of Directors. Accordingly, investors must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investments.

General Risk Factors

If we suffer losses to our facilities or distribution system due to catastrophe, our operations could be seriously harmed.

Our facilities and distribution system, and those of our third-party contractors, are subject to risk of catastrophic loss due to fire, flood, drought or other natural or man-made disasters. A number of our facilities and those of our contract manufacturers are located in areas with above average seismic activity. The risk of an earthquake in the Pacific Rim region or Southern California is significant due to the proximity of major earthquake fault lines, and Taiwan in particular is also subject to typhoons and other Pacific storms, and more recently, a drought impacting the water supply which chip manufacturers rely upon to fabricate chip products. Any catastrophic loss to any of these facilities would likely disrupt our operations, delay production, shipments and revenue and result in significant expenses to repair or replace the facility. The majority of the factories we use for foundry, assembly and test, and warehousing services, are located in Asia, principally in China, Taiwan, and Singapore. Our corporate headquarters is located in Southern California. Our operations and financial condition could be seriously harmed in the event of a major earthquake, fire, flooding, drought, or other natural disasters in Taiwan or the Pacific Rim region, or political unrest, war, labor strikes, work stoppages or public health crises, such as the outbreak of COVID-19, or other natural or man-made disaster in countries where our contractors’ facilities are located. Such catastrophes could result in the disruption of our product shipments, foundry, assembly, or test capacity.

We have recorded goodwill and other intangible assets in connection with business acquisitions. Goodwill and other acquired intangible assets could become impaired and adversely affect our future operating results.

We account for business acquisitions as business combinations under the acquisition method of accounting in accordance with accounting principles generally accepted in the United States. Under the acquisition method of accounting, the total purchase price is allocated to net tangible assets and identifiable intangible assets of acquired businesses based on their fair values as of the date of completion of the acquisition. The excess of the purchase price over those fair values is recorded as goodwill. Our acquisitions have resulted in the creation of goodwill and recording of a large amount of intangible assets based upon the application of the acquisition method of accounting. To the extent the value of goodwill or other intangible assets become impaired, we may be required to incur material charges relating to such impairment. We conduct our annual goodwill and indefinite-lived intangible asset impairment analysis on October 31 each year, or more frequently if we believe indicators of impairment exist. Our reported financial condition and results of operations reflect the balances and results of the acquired businesses but are not restated retroactively to reflect the historical financial position or results of operations of acquired businesses for periods prior to the acquisitions. As a result, comparisons of future results against prior period results will be more difficult for investors. In addition, there can be no guarantee that acquired intangible assets, particularly in-process research and development, will generate revenues or profits that we include in our forecast that is the basis for their fair values as of the acquisition date. Any such impairment charges relating to goodwill or other intangible assets could have a material impact on our operating results in future periods, and the announcement of a material impairment could have a material adverse effect on the trading price and trading volume of our common stock. As of March 31, 2023, our balance sheet reflected goodwill of $318.9 million and other intangible assets of $96.4 million. Consequently, we could recognize material impairment charges in the future.

Unanticipated changes in our tax rates or unanticipated tax obligations could affect our future results.

We are subject to income taxes in the United States, Singapore and various other foreign jurisdictions. The amount of income taxes we pay is subject to our interpretation and application of tax laws in jurisdictions in which we file. Changes in current or future laws or regulations, the imposition of new or changed tax laws or regulations or new interpretations by taxing authorities or courts could affect our results of operations and lead to volatility with respect to tax expenses and liabilities from period to period. For example, beginning in 2022, the Tax Cuts and Jobs Act, or the Tax Act, eliminated the option to deduct research and development expenditures currently and requires taxpayers to capitalize and amortize them over five or fifteen years pursuant to Internal Revenue Code Section 174. This has increased our effective tax rate and our cash tax payable in 2022. If the requirement to capitalize Section 174 expenditures is not modified, it may also impact our effective tax rate and our

Table of Contents

cash tax liability in future years. On August 9, 2022, the CHIPS and Science Act of 2022, or the CHIPS Act, was enacted in the United States. The CHIPS Act will provide financial incentives to the semiconductor industry which are primarily directed at manufacturing activities within the United States for qualifying property placed in service after December 31, 2022. As the Company currently outsources its manufacturing, the CHIPS Act is not expected to have a material impact to the Company’s consolidated tax provision for the year ending December 31, 2023. The Inflation Reduction Act of 2022, or IRA, was signed into law on August 16, 2022. The bill was meant to address the high inflation rate in the United States through various climate, energy, healthcare, and other incentives. These incentives are meant to be paid for by the tax provisions included in the IRA, such as a new 15 percent corporate minimum tax, a 1 percent new excise tax on stock buybacks, additional IRS funding to improve taxpayer compliance, and others. The IRA provisions are effective for tax years beginning after December 31, 2022. At this time, none of the IRA tax provisions are expected to have a material impact to our consolidated tax provision for the year ending December 31, 2023. The application of tax laws and related regulations is subject to legal and factual interpretation, judgment and uncertainty. We cannot determine whether any legislative proposals may be enacted into law or what, if any, changes may be made to such proposals prior to their being enacted into law. If U.S. or international tax laws change in a manner that increases our tax obligation, it could result in a material adverse impact on our results of operations and our financial position.

Our income tax provision is subject to volatility and our ability to use our deferred tax assets to offset future taxable income may be limited since we are subject to tax examinations, which may adversely impact our future effective tax rate and operating results.

Excess tax benefits associated with employee stock-based compensation are included in income tax expense. However, since the amount of such excess tax benefits and deficiencies depend on the fair market value of our common stock, our income tax provision is subject to volatility in our stock price and in the future, could unfavorably affect our future effective tax rate.

Our future effective tax rate could be unfavorably affected by unanticipated changes in the valuation of our deferred tax assets and liabilities, and the ultimate use and depletion of these various tax credits and net operating loss carryforwards. Changes in our effective tax rate could have a material adverse impact on our results of operations. We record a valuation allowance to reduce our net deferred tax assets to the amount that we believe is more likely than not to be realized. In making such determination, we consider all available positive and negative evidence quarterly, including scheduled reversals of deferred tax liabilities, projected future taxable income, tax planning strategies, and recent financial performance. To the extent we believe it is more likely than not that some portion of our deferred tax assets will not be realized, we record a valuation allowance against the deferred tax asset. Realization of our deferred tax assets is dependent primarily upon future taxable income in the applicable jurisdiction. On a periodic basis we evaluate our deferred tax assets for realizability. Based upon our review of all positive and negative evidence, as of March 31, 2023, we continue to have a valuation allowance on state deferred tax assets, certain federal deferred tax assets, and certain foreign deferred tax assets in jurisdictions where we have cumulative losses or otherwise are not expected to utilize certain tax attributes. The impact of releasing some or all of such valuation allowance in a future period could be material in the period in which such release occurs.

Our corporate income tax liability could materially increase if tax incentives we have negotiated in Singapore cease to be effective or applicable or if we are challenged on our use of such incentives.

We operate under certain favorable tax incentives in Singapore which are effective through March 2027, and generally are dependent on our meeting certain headcount and investment thresholds. Such incentives allow certain qualifying income earned in Singapore to be taxed at reduced rates and are conditional upon our meeting certain employment and investment thresholds over time. If we fail to satisfy the conditions for receipt of these tax incentives, or to the extent U.S. or other tax authorities challenge our operation under these favorable tax incentive programs or our intercompany transfer pricing agreements, our taxable income could be taxed at higher federal or foreign statutory rates and our income tax liability and expense could materially increase beyond our projections. Each of our Singapore tax incentives is separate and distinct from the others, and may be granted, withheld, extended, modified, truncated, complied with or terminated independently without any effect on the other incentives. Absent these tax incentives, our corporate income tax rate in Singapore would generally be the 17% statutory tax rate. We are also subject to operating and other compliance requirements to maintain our favorable tax incentives. If we fail to comply with such requirements, we could lose the tax benefits and could possibly be required to refund previously realized material tax benefits. Additionally, in the future, we may fail to qualify for renewal of our favorable tax incentives or such incentives may not be available to us, which could also cause our future taxable income to increase and be taxed at higher statutory rates. Loss of one more of our tax incentives could cause us to modify our tax strategies and our operational structure, which could cause disruption in our business and have a material adverse impact on our results of operations. Further, there can be no guarantee that such modification in our tax strategy will yield tax incentives as favorable as those we have negotiated with Singapore. Our interpretations and conclusions regarding the tax incentives are not binding on

Table of Contents

any taxing authority, and if our assumptions about tax and other laws are incorrect or if these tax incentives are substantially modified or rescinded we could suffer material adverse tax and other financial consequences, which would increase our expenses, reduce our profitability and adversely affect our cash flows.

Investor confidence may be adversely impacted if we are unable to comply with Section 404 of the Sarbanes-Oxley Act of 2002, and as a result, our stock price could decline.

We are subject to rules adopted by the SEC pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, or Sarbanes-Oxley Act, which require us to include in our Annual Report on Form 10-K our management’s report on, and assessment of the effectiveness of, our internal controls over financial reporting.

If we fail to maintain the adequacy of our internal controls, there is a risk that we will not comply with all of the requirements imposed by Section 404. Moreover, effective internal controls, particularly those related to revenue recognition, are necessary for us to produce reliable financial reports and are important to helping prevent financial fraud. Any of these possible outcomes could result in an adverse reaction in the financial marketplace due to a loss of investor confidence in the reliability of our consolidated financial statements and could result in investigations or sanctions by the SEC, the Nasdaq Stock Market LLC, or Nasdaq, or other regulatory authorities or in stockholder litigation. Any of these factors ultimately could harm our business and could negatively impact the market price of our securities. Ineffective control over financial reporting could also cause investors to lose confidence in our reported financial information, which could adversely affect the trading price of our common stock.

Our disclosure controls and procedures are designed to provide reasonable assurance of achieving their objectives. However, our management, including our principal executive officer and principal financial officer, does not expect that our disclosure controls and procedures will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected.

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

Recent Sales of Unregistered Securities

None.

Recent Repurchases of Equity Securities

None.

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

ITEM 5. OTHER INFORMATION

In April 2023, we completed a reduction of our workforce, or the Workforce Reduction. The Workforce Reduction is intended to align our operational needs with the changes in macroeconomic conditions and the near-term demand environment while continuing to support the long-term business strategy by reducing our operating expenses.

As a result of the Workforce Reduction, in the three months ended March 31, 2023, we incurred approximately $4.6 million in restructuring costs primarily related to severance costs and related expenses, and estimate that we will incur approximately $4 million to $5 million in additional such costs through the rest of 2023 due to statutory requirements in the jurisdictions in which the terminated employees were employed. The estimate of costs that we expect to incur, and the timing thereof, are subject to a number of assumptions and actual results may differ. We may also incur other charges or cash

Table of Contents

expenditures not currently contemplated due to events that may occur as a result of, or associated with, the Workforce Reduction.

All statements other than statements of historical facts contained in the paragraphs above are forward-looking statements including statements relating to our plans, expectations, forecasts and future events. Such forward-looking statements include, but are not limited to, the potential of, and expectations regarding our statements relating to the expected impacts, charges and costs associated with the Workforce Reduction that we expect to incur.

Table of Contents

ITEM 6. EXHIBITS


Exhibit Number						Exhibit Title










31.1						Certification of Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2						Certification of Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1(*)						Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

101.INS						Inline XBRL Instance Document - the instance document does not appear in the interactive data file because its XBRL tags are embedded within the inline XBRL document.
101.SCH						Inline XBRL Taxonomy Extension Schema Document
101.CAL						Inline XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF						Inline XBRL Taxonomy Extension Definition Linkbase Document
101.LAB						Inline XBRL Taxonomy Extension Label Linkbase Document
101.PRE						XBRL Taxonomy Extension Presentation Linkbase Document
104						Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101)


(*)			In accordance with Item 601(b)(32)(ii) of Regulation S-K and SEC Release No. 33-8238 and 34-47986, Final Rule: Management’s Reports on Internal Control Over Financial Reporting and Certification of Disclosure in Exchange Act Periodic Reports, the certifications furnished pursuant to this item will not be deemed “filed” for purposes of Section 18 of the Exchange Act (15 U.S.C. 78r), or otherwise subject to the liability of that section. Such certification will not be deemed to be incorporated by reference into any filing under the Securities Act or the Exchange Act, except to the extent that the registrant specifically incorporates it by reference.

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

MAXLINEAR, INC.

(Registrant)

Date:

April 26, 2023

By:

/s/ Steven G. Litchfield

Steven G. Litchfield

Chief Financial Officer and Chief Corporate Strategy Officer

(Principal Financial Officer and Duly Authorized Officer)